BANDAI METAL BUILD Strike Freedom Gundam 2024 Instruction Manual

1. Introduction and Overview

This manual provides essential instructions for the assembly, operation, and maintenance of your BANDAI METAL BUILD Strike Freedom Gundam 2024 action figure. This collectible item is designed for display and posing, featuring a detailed construction from die-cast, ABS, and PVC materials.

The METAL BUILD Strike Freedom Gundam 2024 is a commemorative release, featuring updated coloring and a luxurious finish with gold electrolytic plating on its joints, providing an overwhelming presence.

Recommended Age: 15 years and up.

2. Product Contents

Please verify that all components listed below are present in your package.

• Main unit (Strike Freedom Gundam figure)
• Replacement wrist parts (5 types, left and right)
• Backpack unit
• High energy beam rifle (left and right)
• Beam saber x 2
• Beam shield x 2
• Display Base
• Arm for securing dragoon units

Figure shown in a dynamic pose, illustrating the overall appearance and articulation.

3. Setup and Assembly

Carefully remove all components from their packaging. Handle the figure and its parts with care to avoid damage.

1. Attach the Backpack: Align the backpack unit with the connection points on the figure's back and gently push until it clicks into place.
2. Attach Wrist Parts: Select the desired replacement wrist parts. Carefully pull off the existing wrist and push the new wrist onto the arm joint. Ensure a snug fit.
3. Assemble Beam Rifles: The high energy beam rifles come as left and right units. They can be held in the figure's hands or stored on the hips.
4. Prepare Beam Sabers: The two beam sabers can be held by the figure or stored in their designated slots.
5. Attach Beam Shields: The beam shields attach to the forearms.
6. Utilize the Display Base: Assemble the display base according to its separate instructions (if provided) and use the included arm to securely mount the figure for dynamic poses.

Rear view of the figure, highlighting the backpack and wing assembly.

4. Operating and Posing

The METAL BUILD Strike Freedom Gundam features extensive articulation for a wide range of poses.

• Joint Articulation: Gently manipulate the joints at the neck, shoulders, elbows, wrists, waist, hips, knees, and ankles to achieve desired poses. Avoid excessive force to prevent breakage.
• Weapon Handling: The high energy beam rifles can be posed in various firing positions. The beam sabers can be held for close-quarters combat poses.
• Dragoon System: The dragoon units on the backpack are articulated. Use the provided arm for securing dragoon units to display them in deployed configurations, simulating flight or attack sequences.
• Beam Shields: The beam shields can be adjusted on the forearms to complement defensive or offensive poses.

Figure holding a high energy beam rifle, demonstrating weapon posing.

Dynamic action pose with dragoon units deployed, showcasing the figure's full articulation and accessories.

5. Maintenance and Care

Proper care will ensure the longevity and pristine condition of your collectible figure.

• Cleaning: Use a soft, dry brush or a microfiber cloth to gently remove dust. Avoid abrasive cleaners or solvents, as these can damage the paint and finish.
• Handling: Always handle the figure by its main body. Avoid gripping small, delicate parts or applying excessive pressure to joints.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation and discoloration. Keep it in a dust-free environment.
• Paint Transfer: Be mindful that prolonged contact between certain painted surfaces or accessories might lead to paint transfer.

6. Troubleshooting

This section addresses common issues you might encounter.

• Loose Joints: If a joint feels loose, gently try to adjust its position. Avoid forcing it. Some joints may be designed for specific ranges of motion.
• Difficulty Attaching Parts: Ensure that parts are correctly aligned before attempting to attach them. Do not force parts together if they do not fit easily, as this may cause breakage. Check for any obstructions.
• Figure Instability: If the figure is unstable in a pose, ensure all joints are securely positioned and consider using the provided display base for added stability.

7. Specifications

8. Warranty and Support

Information regarding specific warranty terms or direct customer support contacts is not provided within this manual. For any inquiries regarding product defects, missing parts, or further assistance, please refer to the official BANDAI website or contact the retailer from whom the product was purchased.

Please retain your proof of purchase for any potential warranty claims.