BANDAI SPIRITS Best Mecha Collection One Piece Shogun Frankie Plastic Model Instruction Manual

1. Introduction

Thank you for purchasing the BANDAI SPIRITS Best Mecha Collection One Piece Shogun Frankie Color Coded Plastic Model. This kit allows you to construct a detailed replica of Shogun Frankie, the robot weapon created by the Straw Hat Pirates' shipwright. This manual provides essential information for assembly, operation, and maintenance to ensure an enjoyable building experience and long-lasting display of your model.

Figure 1: Completed Shogun Frankie plastic model.

2. Safety Information

Please read and understand all safety precautions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product.

• Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Keep all parts away from infants and young children.
• Sharp Edges: Some plastic parts may have sharp edges or points after removal from the runners. Handle with care and use appropriate tools to trim excess plastic.
• Ventilation: If using adhesives or paints (not included), ensure adequate ventilation in your workspace.
• Disposal: Dispose of plastic runners and waste materials responsibly.

3. Package Contents

Verify that all components listed below are present in your package before starting assembly. If any parts are missing or damaged, please contact customer support.

• Plastic model runners (various colors)
• Fran Sword accessory
• Rocket Launcher accessory
• Shield accessory
• Color seals for detailing
• Marking stickers for emblems and details
• Assembly instruction manual (pictorial)

4. Assembly Instructions

This model kit requires assembly. Please refer to the included pictorial assembly instruction manual for detailed, step-by-step guidance. The following general steps and tips will assist you:

1. Preparation: Gather necessary tools such as plastic nippers, a hobby knife, and tweezers. Ensure a clean, well-lit workspace.
2. Part Removal: Carefully cut parts from the plastic runners using nippers. Avoid pulling or twisting, which can damage parts. Trim any excess plastic (nubs) with a hobby knife for a clean finish.
3. Follow Manual: Adhere strictly to the sequence and instructions provided in the pictorial assembly manual. Each step is designed to ensure correct and stable construction.
4. Color Seals & Stickers: Apply color seals and marking stickers as indicated in the manual to enhance the model's appearance. Use tweezers for precise placement.

Figure 2: Shogun Frankie model, showcasing its back details and optional display stand.

Figure 3: Shogun Frankie in a dynamic pose, demonstrating articulation.

5. Product Features and Articulation

The Shogun Frankie plastic model is designed with several features to enhance display and posing:

• Interchangeable Weapons: The model includes a Fran Sword, Rocket Launcher, and Shield, which can be attached to Shogun Frankie's arms or back as depicted in the anime.
• Articulated Joints: Enjoy a wide range of posing options thanks to the fully articulated joints, including movable knuckles. This allows for dynamic action poses.
• Color-Coded Parts: The kit features color-coded plastic parts, minimizing the need for painting to achieve an accurate representation of Shogun Frankie.

Figure 4: Shogun Frankie wielding the Fran Sword.

Figure 5: Detail of the Rocket Launcher attachment on Shogun Frankie's arm.

Figure 6: Detail of the Shield attachment on Shogun Frankie's arm.

6. Maintenance and Care

To keep your Shogun Frankie model in excellent condition, follow these maintenance guidelines:

• Cleaning: Dust the model regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and gently wipe.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Handling: Handle the model by its main body whenever possible, avoiding excessive force on delicate parts or joints.

7. Troubleshooting

If you encounter any issues during or after assembly, consider the following common solutions:

• Parts Not Fitting: Double-check the assembly manual to ensure you are using the correct parts and orientation. Sometimes, a small amount of excess plastic (a "nub") might prevent a snug fit; carefully trim it with a hobby knife.
• Loose Joints: If a joint feels too loose, a thin layer of clear nail polish or a specialized hobby joint tightener can be applied to the peg and allowed to dry before reassembly.
• Stickers Not Adhering: Ensure the surface is clean and dry before applying stickers. Use tweezers for precise placement and press firmly.
• Missing/Damaged Parts: Refer to the "Package Contents" section. If parts are genuinely missing or damaged upon opening, contact BANDAI SPIRITS customer support with your purchase details.

8. Product Specifications

9. Warranty and Customer Support

BANDAI SPIRITS products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, if you encounter any manufacturing defects or require assistance with your product, please contact BANDAI SPIRITS customer support directly. Keep your proof of purchase for any warranty claims or support inquiries.

For further information and support, please visit the official BANDAI SPIRITS website or contact their regional customer service.