iLive Electronics Magnetic + Portable Wireless Bluetooth Speaker Set

Introduction

The iLive Electronics Magnetic + Portable Wireless Bluetooth Speaker Set (Model ISB2133B) offers a versatile audio experience with its true wireless stereo (TWS) capabilities. This speaker set allows for flexible placement, either stacked for concentrated sound or separated for an immersive stereo effect. Designed for portability, it features a durable rubberized coating and a long-lasting battery, making it suitable for various environments.

Important Safety Information

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Always read and follow all instructions carefully before using this product. Keep this manual for future reference.

What's in the Box

• iLive Magnetic + Portable Wireless Bluetooth Speaker Set (2 Speakers)
• Power Cable (Micro-USB)
• Warranty Card

Product Overview

Speaker Components:

• Power Button: Used to turn the speaker on or off.
• Play/Pause/Pair Button: Controls audio playback and initiates Bluetooth pairing.
• Volume Up/Next Track Button: Increases volume with a short press, skips to next track with a long press.
• Volume Down/Previous Track Button: Decreases volume with a short press, skips to previous track with a long press.
• Micro-USB Charging Port: For recharging the internal battery.
• Aux In (3.5mm) Port: For wired audio connection.
• LED Indicator: Displays power and pairing status.

Setup

Charging the Speakers:

1. Connect the supplied Micro-USB charging cable to the Micro-USB port on each speaker.
2. Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer's USB port.
3. The LED indicator will illuminate during charging and turn off when fully charged. Allow approximately 2-3 hours for a full charge.

Initial Power On:

Press and hold the Power button on each speaker for a few seconds until you hear an audible prompt and the LED indicator lights up.

Operating

Bluetooth Pairing (Single Speaker Mode):

1. Ensure the speaker is charged and powered on.
2. The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing LED.
3. On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings and search for available devices.
4. Select "ISB2133B" from the list of devices.
5. Once paired, the LED indicator will become solid, and you will hear a confirmation tone.

True Wireless Stereo (TWS) Pairing (Pairing Two Speakers):

TWS allows both speakers to play audio simultaneously for a stereo sound experience.

1. Ensure both speakers are charged and powered on.
2. Do not connect either speaker to your Bluetooth device yet.
3. With both speakers powered on and in pairing mode, they will automatically attempt to connect to each other for TWS. You will hear a confirmation tone when they successfully pair.
4. Once the speakers are paired to each other, one speaker will act as the master unit. Now, on your Bluetooth-enabled device, search for "ISB2133B" and connect to it.
5. Both speakers will now play audio in stereo.

Audio Playback:

• Play/Pause: Press the Play/Pause button once.
• Volume Up: Short press the Volume Up (+) button.
• Volume Down: Short press the Volume Down (-) button.
• Next Track: Long press the Volume Up (+) button.
• Previous Track: Long press the Volume Down (-) button.

Auxiliary Input Usage:

To use the speakers with a non-Bluetooth device, connect a 3.5mm audio cable (not included) from your device's audio output to the Aux In port on one of the speakers. The speaker will automatically switch to Aux mode.

Maintenance

• Keep the speakers away from extreme temperatures, direct sunlight, and moisture.
• Clean the speakers with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid dropping the speakers or subjecting them to strong impacts.
• When not in use for extended periods, store the speakers in a cool, dry place and recharge them periodically to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

This product comes with a limited warranty. Please refer to the included Warranty Card for detailed terms and conditions. For technical support, product registration, or warranty claims, please visit the official iLive Electronics website or contact their customer service department using the information provided on the warranty card or product packaging.

Manufacturer: DPI, Inc.