1. Introduction
This manual provides instructions for the safe and efficient use of your Lumeno 200 Lumens Rechargeable LED Sensor Light. This portable and compact lighting solution features a motion sensor, magnetic attachment, and a rechargeable battery, making it suitable for various applications such as cabinet lighting, closet lighting, and emergency use.
Image: Front view of the Lumeno 200 Lumens Rechargeable LED Sensor Light.
2. Package Contents
- 1 x Lumeno 200 Lumens Rechargeable LED Sensor Light, 400 mm Size
- (Charging cable and mounting accessories may be included; refer to product packaging for exact contents)
3. Product Features
- Light Output: 200 lumens, suitable for close-up tasks and illuminating larger spaces.
- Motion Sensor: Activates upon detecting movement within a 1-3 meter range.
- Rechargeable Battery: Built-in Lithium Ion battery for convenience.
- Magnetic Back: Enables easy attachment to metal surfaces.
- Versatile Use: Ideal for nightlight, cabinet lighting, closet lighting, and emergency lighting.
- Compact Design: Lightweight and easy to carry.
4. Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or modify the light. This may void the warranty and pose a safety risk.
- Keep out of reach of children.
- Use only the specified charging method and cable.
5. Setup
5.1 Initial Charging
Before first use, fully charge the LED sensor light. Connect the provided USB-C charging cable to the charging port on the side of the light and plug the other end into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status (e.g., red for charging, green for fully charged).
5.2 Mounting
The Lumeno LED Sensor Light features a magnetic back for easy installation on metal surfaces. Ensure the surface is clean and dry before attachment.
Image: Back view of the Lumeno LED Sensor Light, highlighting the integrated magnetic plates for easy mounting on metallic surfaces.
For non-metallic surfaces, you may use adhesive metal strips (not always included, check package) or other suitable mounting hardware to create a magnetic surface for attachment.
6. Operating Instructions
6.1 Power On/Off and Mode Selection
Locate the power button/switch on the side of the light. Typically, this switch allows you to cycle through different modes:
- OFF: Light is completely off.
- ON (Constant Light): Light stays on continuously.
- AUTO (Sensor Mode): Light activates automatically when motion is detected in low-light conditions.
Image: Side view of the Lumeno LED Sensor Light, illustrating the motion sensor, USB-C charging port, and the mode selection switch.
6.2 Motion Sensor Operation
In AUTO mode, the light will turn on when motion is detected within its 1-3 meter range. The sensor is most effective when placed in an area with clear line of sight. The light will automatically turn off after a period of no motion, typically 15-30 seconds, to conserve battery.
6.3 Dimmable Settings (If Applicable)
Some models may feature dimmable settings. If your model includes this feature, a long press on the power button or a dedicated button may allow you to adjust the brightness level. Refer to your specific product packaging for details on this function.
7. Maintenance
7.1 Cleaning
Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface and internal components.
7.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the light when the brightness noticeably diminishes. If storing the light for an extended period, charge it to approximately 50% every few months.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. Incorrect mode selected. Insufficient ambient light (in AUTO mode). | Charge the light fully. Ensure the switch is in ON or AUTO mode. Test in a darker environment for AUTO mode. |
| Motion sensor not working. | Light is not in AUTO mode. Sensor is obstructed. Ambient light is too bright. Motion is outside detection range. | Switch to AUTO mode. Clear any obstructions from the sensor. Test in a darker environment. Ensure motion occurs within 1-3 meters of the sensor. |
| Light does not charge. | Charging cable is faulty. USB power source is not working. Charging port is damaged. | Try a different USB-C cable. Try a different USB power source. Contact customer support if port is damaged. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | LUMENO572 |
| Light Output | 200 Lumens |
| Dimensions | 40 x 5 x 3 cm |
| Weight | 400 g |
| Battery Type | Lithium Ion (included) |
| Motion Sensor Range | 1-3 meters |
| Color | White/Black |
| Manufacturer | Lumeno LED |
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Lumeno LED