HOOBRO WN75CZ01G1 3-Piece Industrial Dining Table Set

Introduction

Thank you for choosing the HOOBRO WN75CZ01G1 3-Piece Industrial Dining Table Set. This set is designed to provide a functional and stylish dining solution for small spaces, blending rustic charm with an industrial aesthetic. This manual provides essential information for assembly, safe use, and maintenance of your new dining set.

Safety Information

• Children are not allowed to climb or stand on the product. Ensure children are supervised around the dining set.
• Observe the weight limits for both the table and each stool to prevent damage or injury.
• Place the dining set on a flat, stable surface to prevent tipping.
• Regularly check and tighten all screws and connections to maintain stability.
• Avoid placing hot items directly on the table surface without protective mats.

Package Contents

Please verify that all components are present before beginning assembly:

• Dining Table Top (1)
• Table Frame Components (various)
• Stool Seats (2)
• Stool Frame Components (various)
• Assembly Hardware (screws, Allen wrench, etc.)
• Instruction Manual (this document)

Assembly Instructions (Setup)

Assembly is designed to be straightforward. Follow these steps carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the parts list in your included guide to ensure everything is present and undamaged.
2. Assemble Table Frame: Attach the table legs to the crossbars using the provided screws. Do not fully tighten screws until all components are loosely connected.
3. Attach Tabletop: Secure the tabletop to the assembled table frame using the designated screws. Once the tabletop is in place, fully tighten all screws on the table frame.
4. Assemble Stool Frames: For each stool, attach the legs to the footrests and seat support frame. Again, do not fully tighten screws at this stage.
5. Attach Stool Seats: Place each stool seat onto its assembled frame and secure with screws. Once the seats are attached, fully tighten all screws on both stool frames.
6. Final Check: Ensure all screws are securely tightened and the table and stools are stable before use.

Image: Diagram illustrating the space-saving design where stools can be neatly tucked under the table.

Image: Detailed assembly diagram with numbered parts and dimensions for the table and stools.

Operating Instructions (Usage)

The HOOBRO WN75CZ01G1 dining set is versatile and suitable for various settings due to its compact and functional design.

• Space-Saving Design: The two stools are designed to tuck neatly under the table when not in use, maximizing floor space in smaller rooms.
• Versatile Placement: Ideal for kitchens, dining rooms, breakfast nooks, living rooms, or even as a compact workspace.
• Comfortable Seating: The table and stools are sized for comfortable dining and casual use.

Image: A user seated at the dining table, demonstrating the comfortable height and design of the stools.

Image: Visual representation of the dining set's adaptability for use in a kitchen, as a study desk, or in a dining room.

Care and Maintenance

To ensure the longevity and appearance of your HOOBRO dining set, follow these care instructions:

• Cleaning: Wipe the surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth and mild cleaner, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Protection: Use coasters and placemats to protect the tabletop from spills, heat, and scratches.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish.
• Regular Inspection: Periodically check all screws and connections and tighten them as needed to maintain structural integrity.

Troubleshooting

If you encounter any issues with your dining set, refer to the following common solutions:

• Uneven Table/Stools: If the table or stools wobble, loosen all screws slightly, press down firmly on the top surface to ensure even contact with the floor, then retighten all screws. Adjust the leveling feet if present.
• Loose Connections: If any part feels loose, re-tighten the corresponding screws using the provided Allen wrench.
• Missing Parts: If any parts are missing upon arrival, please contact HOOBRO customer support for assistance.

Specifications

Image: Comprehensive dimension diagram for the HOOBRO WN75CZ01G1 dining table and stools.

Warranty and Support

For warranty information, replacement parts, or any product-related inquiries, please contact HOOBRO customer support through the retailer's platform or the official HOOBRO website. Please have your model number (WN75CZ01G1) and purchase date available when contacting support.