RoyalCraft Green Fluted 3 Drawer Dresser Instruction Manual

1. Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Anti-Tipping Device: To prevent serious injury, this dresser must be securely attached to the wall using the provided anti-tipping straps. Ensure proper installation as per the assembly instructions.
• Stability: The dresser features a dual anti-slip design for drawers and a reinforced bottom plate for enhanced stability. Always place the dresser on a flat, level surface.
• Weight Capacity: The maximum recommended load for this dresser is 150 pounds (68 kg). Do not exceed this weight. Distribute weight evenly across drawers and the top surface.
• Materials: Constructed from P2 certified medium density fiberboard with an ASTM finish and low odor safety paint.
• Children Safety: Do not allow children to climb on or play with the dresser. Keep small parts and hardware away from children during assembly.

2. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. Refer to the packing list included in your box for specific component identification.

Typical package contents include:

• Dresser Panels (Top, Bottom, Sides, Back)
• 3 Drawer Components (Fronts, Sides, Backs, Bottoms)
• Drawer Sliding Rails
• Hardware Pack (Screws, Dowels, Cam Locks, Handles, etc.)
• Anti-Tipping Straps and Wall Anchors
• Assembly Manual

3. Setup and Assembly

Assembly is required for this product. It is recommended to have two people for assembly. Follow the step-by-step instructions provided in the separate assembly manual for detailed guidance. Ensure you have a screwdriver or power drill readily available.

Key Assembly Steps:

1. Unpack all components and verify against the parts list.
2. Assemble the main dresser frame.
3. Install the drawer sliding rails onto the dresser side panels and drawer sides. Pay close attention to orientation.
4. Assemble each of the three drawers.
5. Insert the assembled drawers into the dresser frame.
6. Securely install the anti-tipping device to the back of the dresser and to a wall stud.

4. Operating Instructions (Usage)

The RoyalCraft 3 Drawer Dresser is designed for versatile storage in various rooms. Its smooth-gliding drawers provide easy access to your belongings.

Storage and Organization:

• Each deep 11.3-inch drawer offers substantial storage capacity for clothing, accessories, or other personal items.
• The spacious top surface (16"D x 32"W) can accommodate lamps, decorative items, or other essentials.
• The dresser is suitable for use in bedrooms, living rooms, hallways, entryways, or even bathrooms for organizing toiletries.

5. Maintenance

To ensure the longevity and appearance of your RoyalCraft dresser, follow these simple maintenance guidelines:

• Cleaning: Wipe the surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: The dresser features a waterproof paint finish. In case of spills, wipe immediately with a dry cloth to prevent staining.
• Drawer Rails: Periodically check drawer sliding rails for smooth operation. If needed, a small amount of silicone spray can be applied to the rails (avoiding contact with wood surfaces) to maintain smooth gliding.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.

6. Troubleshooting

If you encounter any issues with your dresser, refer to the following common troubleshooting tips:

7. Specifications

8. Warranty and Customer Support

RoyalCraft is committed to ensuring your satisfaction with our products. We offer dedicated customer service to assist you with any questions or concerns.

• Customer Service: For assistance with assembly, missing parts, or any product-related inquiries, please contact our support team.
• Contact Information: You can reach us via email at support@royalcraft.store.
• Warranty: Information regarding product warranties and return options can be found on our official brand store page or by contacting customer support.