Enbrighten 16in. On/Off Direct Wire LED Under Cabinet Light Fixture
Instruction Manual
Introduction
Thank you for choosing the Enbrighten 16in. On/Off Direct Wire LED Under Cabinet Light Fixture. This manual provides important information regarding the installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before installation and keep it for future reference.
This sleek 16-inch fixture is designed for direct-wire installation, offering high-quality, warm white LED lighting (3000K, 410 lumens) ideal for various spaces such as kitchens, workshops, and offices. Its Energy Star certification ensures energy efficiency and reduced electrical costs.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only copper supply conductors rated for 90°C.
- Do not install this fixture near any heat source or in areas with high humidity.
- Ensure all connections are secure and properly insulated.
Package Contents
Verify that all components are present before beginning installation:
- Enbrighten 16in. LED Under Cabinet Light Fixture
- Mounting Hardware (screws, wire nuts)
- Instruction Manual (this document)
Figure 1: The Enbrighten 16-inch LED Under Cabinet Light Fixture. This image shows the white, rectangular light fixture with a translucent diffuser covering the LED strip, emitting a warm white light. A small ON/OFF switch is visible on the top surface of the fixture.
Setup and Installation
This fixture is designed for direct-wire installation. Professional installation is recommended if you are not familiar with electrical wiring.
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltage tester.
- Prepare Mounting Location: Choose a suitable location under a cabinet or shelf. Ensure there is enough space for the fixture and access to the electrical wiring.
- Mark Mounting Holes: Hold the fixture in the desired position and mark the locations for the mounting screws.
- Drill Pilot Holes: Drill small pilot holes at the marked locations.
- Secure Fixture: Use the provided mounting screws to attach the light fixture securely to the mounting surface.
- Wire Connections:
- Connect the black wire from the fixture to the black (hot) wire from the electrical supply.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical supply.
- Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the electrical supply.
- Use the provided wire nuts to secure all connections. Ensure no bare wire is exposed.
- Tuck Wires: Carefully tuck all wires into the junction box or fixture housing, ensuring they are not pinched.
- Restore Power: Once all connections are secure and the fixture is properly mounted, restore power at the circuit breaker.
Operating Instructions
The Enbrighten LED Under Cabinet Light Fixture can be operated in two ways:
- In-Wall Switch: If wired to an in-wall light switch, you can control the fixture by toggling the wall switch ON or OFF.
- Manual ON/OFF Switch: The fixture also features a manual ON/OFF switch located on its body for direct control.
For optimal use, ensure the manual switch on the fixture is in the desired position (ON or OFF) if you are controlling it via an in-wall switch.
Maintenance
This LED fixture requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LEDs: The LEDs in this fixture are designed for a long lifespan and are not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Manual switch is OFF. |
Check circuit breaker/fuse. Verify all wire connections are secure (with power off). Ensure manual ON/OFF switch on fixture is ON. |
| Light flickers. | Loose wiring connection. Incompatible dimmer switch (if applicable, though this model is ON/OFF). |
Check all wire connections (with power off). This fixture is designed for ON/OFF operation; do not use with a dimmer switch. |
| Light is dim. | Not applicable for this model; LEDs provide consistent brightness. | Ensure power supply is stable. If issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 71344-T1 |
| Brand | Enbrighten |
| Light Type | LED Under Cabinet Light Fixture |
| Length | 16 inches |
| Light Output | 410 Lumens |
| Color Temperature | 3000K (Warm White) |
| Installation Type | Direct Wire |
| Color | White |
| Certifications | Energy Star Certified |
| Item Weight | 1.5 pounds |
| Package Dimensions | 16 x 3.6 x 1.2 inches |
Warranty and Support
Enbrighten products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Enbrighten website.
If you encounter any issues or have questions regarding your Enbrighten LED Under Cabinet Light Fixture, please contact Enbrighten Customer Support for assistance. You can find contact information on the brand's official website or through your retailer.
For more information about Enbrighten products, visit the Enbrighten Store.