NEEWER TP38 Phone Camera Tripod User Manual

Introduction

This manual provides detailed instructions for the NEEWER TP38 Phone Camera Tripod. This versatile accessory functions as both a compact tripod and an extendable selfie stick, designed for use with smartphones, action cameras, and lightweight DSLR/mirrorless cameras. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

Image: The NEEWER TP38 Phone Camera Tripod in its compact, folded state.

Product Overview

The NEEWER TP38 is a 2-in-1 device combining a tripod and a selfie stick. Key components include:

• Adjustable Phone Holder: Accommodates smartphones from 2.4" (60mm) to 3.4" (86mm) width.
• 1/4" Thread Screw: For mounting DSLR/mirrorless cameras.
• Action Camera Adapter: Compatible with GoPro Hero, Insta360, DJI Osmo Action, etc.
• 360° Ball Head: Allows for panoramic, horizontal, and vertical shooting.
• Extendable Shaft: Four sections extend from 8.3" (21cm) to 15" (38cm).
• Integrated Tripod Legs: Provides stable support.
• Two Cold Shoes: For attaching external accessories like lights or microphones.
• Safety Lanyard: For secure handling.

Setup Instructions

1. Unfold Tripod Legs: Gently spread the three legs at the base of the tripod until they are fully extended and stable.


Image: Step-by-step visual guide for unfolding the tripod legs and extending the telescopic shaft.

2. Extend Telescopic Shaft: Pull the top section of the tripod upwards to extend the telescopic shaft to your desired height. The shaft has four sections, allowing extension from 8.3" (21cm) to 15" (38cm).


Image: Visual representation of the tripod's adjustable height settings, from 8.2" (21cm) to 14.9" (38cm).

3. Adjust Ball Head: Loosen the locking knob on the 360° ball head to adjust the angle. The ball head features a U-notch design for easy switching between horizontal (landscape) and vertical (portrait) shooting modes. Tighten the knob to secure the desired angle.


Image: Detailed view of the 360° swivel and 90° tilt functionality of the ball head, illustrating horizontal and vertical shooting.

4. Mounting a Smartphone: The integrated phone holder can be unfolded from the top of the tripod. Adjust the clamp width from 2.4" (60mm) to 3.4" (86mm) to securely fit your smartphone.


Image: Illustration of the hidden phone holder, showing how it unfolds and its adjustable width for various smartphones.

5. Mounting a Camera: For DSLR/mirrorless cameras, ensure the phone holder is folded down. Use the 1/4" thread screw on the top of the ball head to attach your camera.
6. Mounting an Action Camera: Attach the provided action camera mount adapter to the 1/4" thread screw, then secure your action camera (e.g., GoPro Hero, Insta360, DJI Osmo Action) to the adapter.
7. Attaching Accessories: Utilize the two cold shoe mounts on the phone holder to attach additional photography accessories such as LED fill lights or microphones.


Image: Visual guide demonstrating the tripod's compatibility with action cameras, DSLR/mirrorless cameras, pocket fill lights, and ring lights.

Operating Instructions

Using as a Selfie Stick

With the tripod legs folded, hold the handle firmly. Extend the telescopic shaft to your desired length for capturing selfies or wider shots. The safety lanyard can be used for added security during handheld use.

Image: A person holding the NEEWER TP38 extended as a selfie stick, with a phone mounted and the safety lanyard visible.

Using as a Tripod

Extend the tripod legs and place the tripod on a flat, stable surface. Adjust the height and angle of your device using the telescopic shaft and ball head. This mode is ideal for stable video recording, time-lapses, or group photos.

Remote Control (if applicable)

If your model includes a Bluetooth remote control, pair it with your smartphone according to its specific instructions. This allows you to remotely trigger photos or start/stop video recording without touching your phone, reducing camera shake.

Maintenance

• Cleaning: Wipe the tripod with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
• Storage: Store the tripod in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully collapsed and clean before storage.
• Lubrication: Do not attempt to lubricate any moving parts. The mechanism is designed for maintenance-free operation.
• Avoid Overloading: Do not exceed the maximum load capacity of 1.5kg (3.3lb) to prevent damage.

Troubleshooting

• Tripod is unstable: Ensure the legs are fully extended and placed on a flat, stable surface. Check that the device mounted is within the weight limit.
• Shaft does not extend/retract smoothly: Check for any obstructions or debris in the telescopic sections. Do not force the mechanism.
• Phone holder not gripping securely: Ensure your phone's width is within the 2.4"-3.4" (60-86mm) range. Remove bulky phone cases if necessary.
• Ball head not holding position: Tighten the locking knob firmly after adjusting the angle.

Specifications

Image: Visual summary of the product's packing list and detailed specifications.

Warranty Information

The NEEWER TP38 Phone Camera Tripod comes with a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official NEEWER website or contact customer support.

Customer Support

For any questions, technical assistance, or warranty inquiries regarding your NEEWER TP38 Phone Camera Tripod, please visit the official NEEWER website or contact their customer support team. You can find contact details on the product packaging or the NEEWER brand store on Amazon.

NEEWER Brand Store: Visit NEEWER Store on Amazon