Intellitron CK-2217D Multi-function Digital LED Wall Clock User Manual

Introduction

Thank you for purchasing the Intellitron CK-2217D Multi-function Digital LED Wall Clock. This clock features a bright LED display showing time, date, day, and room temperature. This manual provides detailed instructions for setting up, operating, and maintaining your new clock.

Safety Information

• Ensure the power source is 5V USB. Using an incorrect power adapter may damage the device.
• Do not expose the clock to extreme temperatures, direct sunlight, or high humidity.
• Keep the device away from water or other liquids.
• Do not attempt to disassemble or repair the clock yourself. Contact qualified service personnel for assistance.
• Keep out of reach of children.

Package Contents

• Intellitron CK-2217D Digital LED Wall Clock
• USB Power Cable
• External Temperature Probe (if included)
• User Manual

Product Overview

Figure 1: Front View of the Clock. Shows the large digital time display at the top, and smaller displays for month, date, day, and temperature at the bottom.

Figure 2: Back View of the Clock. Displays the control buttons (SNOOZE, DOWN, UP, ALARM, SET) along the top edge, a USB power input, and an external temperature probe connection.

Control Buttons:

• SNOOZE: Activates snooze function during an alarm; adjusts brightness.
• DOWN: Decreases values during setting; changes display mode.
• UP: Increases values during setting; changes display mode.
• ALARM: Enters/exits alarm setting mode; enables/disables alarm.
• SET: Enters/exits time/date setting mode; confirms settings.

Setup

1. Power Connection:

1. Connect the small end of the provided USB power cable to the USB input port on the back of the clock.
2. Connect the large end of the USB power cable to a 5V USB power adapter (not included) or a powered USB port.
3. The clock display will illuminate.

2. External Temperature Probe (if applicable):

• If your model includes an external temperature probe, plug its connector into the dedicated port on the back of the clock.
• Position the probe in the desired location for temperature measurement.

Operating Instructions

Setting Time and Date:

1. Press and hold the SET button for 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press SET to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the minutes.
5. Press SET to confirm minutes and move to year setting.
6. Repeat the process using UP/DOWN and SET to set the year, month, and day.
7. After setting the day, press SET one last time to exit setting mode.

Setting the Alarm:

1. Press the ALARM button once to enter alarm setting mode. The alarm hour digits will flash.
2. Use the UP or DOWN buttons to adjust the alarm hour.
3. Press ALARM to confirm the hour and move to alarm minute setting. The alarm minute digits will flash.
4. Use the UP or DOWN buttons to adjust the alarm minutes.
5. Press ALARM again to confirm and exit alarm setting mode.
6. To enable or disable the alarm, press the ALARM button briefly outside of setting mode. An alarm icon will appear/disappear on the display.

Snooze Function:

• When the alarm sounds, press the SNOOZE button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-9 minutes, consult product specifics if available).
• To turn off the alarm completely, press any other button (e.g., ALARM or SET) during the alarm or snooze period.

Adjusting Display Brightness:

• Press the SNOOZE button repeatedly (outside of alarm mode) to cycle through different brightness levels.

Changing Temperature Unit:

• Press the DOWN button briefly to switch between Celsius (°C) and Fahrenheit (°F) temperature display.

Maintenance

• Clean the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the USB power cable is not bent or damaged.
• If the clock is not in use for an extended period, disconnect it from the power source.

Troubleshooting

Specifications

• Model: CK-2217D
• Brand: Intellitron
• Material: Plastic
• Power Source: 5V USB (Corded)
• Display Type: Digital LED
• Functions: Time, Date, Day, Temperature (Fahrenheit/Celsius)
• Item Shape: Rectangular
• Item Depth: Approximately 1.5 inches

Warranty and Support

Intellitron products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official Intellitron website. Keep your purchase receipt as proof of purchase for warranty claims.