Self-Cut System Angel Lights Tripod 3-Way Mirror User Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Self-Cut System Angel Lights Tripod 3-Way Mirror. This device is designed to assist with self-grooming tasks by providing a multi-angle view and integrated lighting.

Safety Guidelines

Please read all safety information before use.

• Use the mirror on a stable and level surface to prevent tipping.
• Handle the mirror panels with care to avoid breakage. The mirror is made of glass.
• This product is not intended for use as a support device. Do not lean on the tripod.
• Keep the device away from water or excessive moisture.
• Do not attempt to modify or disassemble the electrical components of the LED lighting system.

Package Contents

Verify that all components are present before assembly:

• 3-Way Mirror Unit with Integrated LED Lights
• Adjustable Tripod Stand
• Attachable Tool Tray
• Power Adapter/Charging Cable

Setup Instructions

1. Tripod Assembly

1. Unfold the tripod legs until they are fully extended and stable.
2. Extend the central pole of the tripod to your desired initial height. Secure it using the locking mechanisms on the pole.

2. Mirror Attachment

1. Locate the mounting point on the top of the tripod stand.
2. Align the mirror unit's attachment point with the tripod's mounting point.
3. Securely attach the mirror unit to the tripod. Ensure it is firmly seated and does not wobble.

3. Attaching the Tool Tray

1. Identify the attachment clamp on the tool tray.
2. Position the tray at a convenient height on the tripod pole.
3. Tighten the clamp to secure the tray in place.

Operating Instructions

1. Adjusting Height

The tripod stand allows for height adjustment up to 7 feet. Loosen the locking mechanisms on the central pole, extend or retract the pole to the desired height, and then securely tighten the locks. Ensure the mirror is at eye level for optimal viewing.

2. Using LED Lighting

The mirror unit features built-in LED lights for enhanced visibility. The lights are rechargeable and can operate cordlessly for approximately 3 hours on a full charge.

• Power On/Off: Locate the touch-sensitive power button on the mirror frame. Tap to turn the lights on or off.
• Adjust Brightness: Press and hold the power button to cycle through brightness levels. Release when the desired brightness is achieved.
• Charging: Connect the provided charging cable to the mirror unit's charging port and a suitable power source. The LED indicator will show charging status.

3. Utilizing the Tool Tray

The attachable tool tray provides a convenient space for organizing grooming tools such as clippers, trimmers, and guards. The tray includes hooks for hanging tools.

Maintenance

Cleaning

• Wipe mirror surfaces with a soft, lint-free cloth and a glass cleaner. Avoid abrasive cleaners.
• Clean the tripod and tray with a damp cloth. Ensure all parts are dry before storage.

Storage

When not in use, fold the mirror unit and retract the tripod for compact storage. Store in a dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Product Specifications

Warranty and Customer Support

For warranty information or technical assistance, please refer to the manufacturer's official website or contact Self-Cut System customer support directly. Keep your purchase receipt for any warranty claims.