SogesHome 47.2'' Dining Table Set with 4 Chairs Instruction Manual

1. Safety Information

Always follow the assembly instructions carefully to avoid injury. Be cautious when handling sharp edges, even though they are rounded. Ensure all components are securely fastened before use to prevent accidents. Keep small parts away from children during assembly.

2. Package Contents

Verify all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Dining Table Top (1)
• Dining Table Legs (4)
• Dining Chairs (4)
• Assembly Hardware Kit (screws, bolts, washers, Allen wrench) (1)
• Instruction Manual (1)

Figure 1: Overview of dining table and chairs components.

3. Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.

3.1. Table Assembly

1. Carefully place the dining table top upside down on a protected surface.
2. Attach each of the four table legs to the designated corners of the table top. Ensure the pre-drilled holes align correctly.
3. Insert the provided screws and bolts into the corresponding holes. Hand-tighten all fasteners initially; do not fully tighten at this stage.
4. Once all legs are attached, carefully flip the table upright. Gently rock the table to allow the legs to settle evenly on the floor.
5. Using the provided Allen wrench, gradually tighten all screws and bolts until they are secure. Avoid over-tightening, which can strip threads or damage the material.

3.2. Chair Assembly

1. For each chair, assemble the backrest and seat frame components according to the diagrams in the included manual.
2. Attach the chair legs to the assembled frame.
3. Insert the provided screws and bolts, hand-tightening them first.
4. Place the chair upright on a flat surface and ensure it is stable before fully tightening all hardware.
5. Repeat these steps for all four chairs.

Important: For optimal stability, it is crucial to partially assemble all parts before fully tightening any screws. This method allows for minor adjustments and ensures the furniture sits level.

Figure 2: Detail of solid pine wood construction and stable leg design.

4. Operating Instructions

The SogesHome dining table set is designed for versatile use in various home settings.

• Dining Use: This set is suitable for daily meals and gatherings. The dining table has a maximum weight capacity of 165 lbs (75 kg). Each chair is designed to support up to 220 lbs (100 kg). Do not exceed these weight limits.
• Multipurpose Functionality: Beyond dining, this versatile set can serve as a computer desk, office workstation, study table, gaming desk, or a charming bistro set, adapting to your needs.
• Space-Saving Design: The chairs are designed to tuck neatly under the table when not in use, optimizing space in smaller rooms or apartments.

Figure 3: Space-saving design with chairs stored under the table.

5. Maintenance and Care

To ensure the longevity and maintain the aesthetic appeal of your SogesHome dining table set, adhere to these care instructions:

• Cleaning: For routine cleaning, wipe all surfaces with a soft, damp cloth. For spills, immediately wipe with a dry cloth. The table's waterproof and rustproof design simplifies maintenance.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, strong chemical solvents, or furniture polishes containing silicone, as these can damage the finish.
• Surface Protection: Utilize placemats or coasters to protect the table surface from hot items, scratches, and liquid spills.
• Regular Inspection: Periodically inspect all screws and bolts. Re-tighten them as necessary to maintain structural integrity and stability.

Figure 4: Key features for durability and ease of maintenance.

6. Troubleshooting

• Issue: Table or chairs feel wobbly after assembly.

  Solution: Ensure all assembly screws and bolts are fully tightened. If wobbling persists, slightly loosen all fasteners, gently rock the furniture on a flat, level surface to allow it to settle, then re-tighten all fasteners securely. Check that the floor surface is even.

• Issue: Minor surface scratches or marks appear.

  Solution: While the surface is designed to be scratch-resistant, it is not entirely scratch-proof. Minor marks may sometimes be buffed out with a soft, dry cloth. For deeper scratches, consider using a furniture repair kit or consulting a professional.
• Issue: Difficulty cleaning stubborn stains.

  Solution: For stubborn stains, use a mild soap solution with a damp cloth, then immediately wipe the area dry with a clean cloth. Avoid prolonged exposure to moisture and do not use abrasive cleaning pads or harsh chemicals.

7. Specifications

Figure 5: Product dimensions for table and chairs.

8. Warranty and Support

SogesHome products are manufactured with a commitment to quality and durability. For specific warranty details pertaining to your purchase, please refer to any documentation included with your product packaging.

Customer Support: For assistance with assembly, missing parts, product inquiries, or any other support needs, please contact SogesHome customer service. Contact information can typically be found on the product packaging or by visiting the official brand website.

Online Resources: Additional support, frequently asked questions, and product information may be available on the SogesHome Amazon Store.