1. Introduction
Thank you for choosing the EXTRASTAR 50W Security Outdoor Light with Motion Sensor. This LED floodlight is designed to provide efficient and reliable outdoor illumination with integrated motion detection capabilities. It features a 50W LED array delivering 4280 lumens of 6500K cold white light, an IP65 waterproof rating, and a PIR motion sensor for enhanced security and energy saving. This manual provides essential information for safe installation, operation, and maintenance of your floodlight.
Figure 1: Typical application areas for the EXTRASTAR 50W Security Outdoor Light.
2. Safety Information
- Electrical Safety: Always disconnect power before installation, maintenance, or repair. Installation should be performed by a qualified electrician if you are unsure.
- Voltage: Ensure the power supply voltage matches the requirements of the floodlight.
- Wiring: Ensure all electrical connections are secure and properly insulated to prevent electric shock.
- Mounting: Mount the floodlight securely on a stable surface to prevent it from falling.
- Heat: Do not cover the floodlight or place flammable materials near it during operation, as it generates heat.
- Eye Protection: Do not stare directly into the light source when it is illuminated, as it can cause eye strain or damage.
- Damage: Do not operate the floodlight if the cable or housing is damaged.
3. Setup and Installation
The EXTRASTAR 50W Security Outdoor Light is designed for wall mounting. Follow these steps for proper installation:
- Choose Location: Select a suitable outdoor location for wall mounting, ensuring the desired detection area for the motion sensor is covered. The recommended installation height is between 1.8 to 2.5 meters for optimal sensor performance.
- Mark Drilling Points: Use the mounting bracket as a template to mark the drilling points on the wall.
- Drill Holes: Drill holes at the marked points and insert appropriate wall plugs (not included).
- Mount Bracket: Secure the mounting bracket to the wall using screws.
- Wiring: Connect the floodlight's electrical wires to your main power supply. Ensure correct polarity (Live, Neutral, Earth) and secure all connections within a waterproof junction box (not included) if required by local regulations. Always disconnect power before wiring.
- Attach Floodlight: Attach the floodlight unit to the mounted bracket and secure it firmly. Adjust the angle of the floodlight to direct illumination as needed.
Figure 2: Floodlight dimensions, PIR detection range, and recommended installation height.
4. Operating Instructions
The integrated PIR motion sensor allows for customizable operation. The sensor features three adjustment dials: LUX, SENS, and TIME.
Figure 3: Motion sensor adjustment dials and their functions.
- LUX (Light Sensitivity): This dial controls the ambient light level at which the sensor becomes active.
- Set to "SUN" (maximum): The sensor will activate the light during both day and night when motion is detected.
- Set to "MOON" (minimum): The sensor will only activate the light at night or in low-light conditions when motion is detected.
- SENS (Sensitivity): This dial adjusts the detection range of the motion sensor.
- "Min.3m": Sets the minimum detection distance to approximately 3 meters.
- "Max.7m": Sets the maximum detection distance to approximately 7 meters. The overall maximum sensing distance is 8 meters with a 120° detection angle.
- TIME (Lighting Duration): This dial sets how long the light remains on after motion is detected and stops.
- "Min.6±3s": Sets the minimum lighting duration to approximately 6 seconds.
- "Max.5±2min": Sets the maximum lighting duration to approximately 5 minutes.
App Control: The product specifications mention "App" as a control method. Refer to the manufacturer's official website or product packaging for specific instructions on connecting and using any associated mobile application, if available.
5. Maintenance
The EXTRASTAR 50W Security Outdoor Light is designed for durability and minimal maintenance.
- Cleaning: Periodically clean the floodlight's surface with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Weather Resistance: The floodlight has an IP65 waterproof rating, making it resistant to dust and water jets. It is also designed to be heat-resistant and anti-freeze, ensuring normal operation in various weather conditions, including rain and snow.
- Inspection: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the unit inspected by a qualified professional.
Figure 4: Floodlight's resistance to various weather conditions.
6. Troubleshooting
If you encounter issues with your floodlight, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Faulty wiring. LUX setting too high (daytime). | Check power connection and circuit breaker. Verify wiring connections (consult an electrician if unsure). Adjust LUX dial to "MOON" for night-only operation or "SUN" for all-day operation. |
| Light stays on continuously. | LUX setting too low (night-time). Constant motion in detection area. TIME setting too long. | Adjust LUX dial towards "MOON" if it's too bright. Ensure no objects are causing constant motion detection. Reduce TIME setting. |
| Light flashes or flickers. | Unstable power supply. Loose wiring connection. Faulty unit. | Check power supply stability. Inspect and secure wiring connections. Contact customer support if problem persists. |
| Motion sensor not detecting. | SENS setting too low. Obstruction in detection path. Incorrect installation height. | Increase SENS setting. Clear any obstructions from the sensor's view. Ensure installation height is within 1.8-2.5m range. |
7. Specifications
Key technical specifications for the EXTRASTAR 50W Security Outdoor Light:
| Feature | Specification |
|---|---|
| Brand | EXTRASTAR |
| Model Number | 5060999030056 |
| Wattage | 50 Watts |
| Lumen Output | 4280 Lumens |
| Color Temperature | 6500K (Cold White) |
| Equivalent Wattage | 241W Incandescent Equivalent |
| IP Rating | IP65 (Waterproof) |
| Motion Sensor Type | PIR (Passive Infrared) |
| Detection Angle | 120° |
| Max Sensing Distance | 8 Meters |
| Product Dimensions | 7.87"L x 7.09"W x 2.36"H (195mm x 178mm x 60mm) |
| Mounting Type | Wall Mount |
| Control Method | Motion Sensor, App (if applicable) |
| Ambient Temperature | -10°C ~ +40°C |
| Service Life | 20000H |
| Rendering (CRI) | CRI≥80 |
Figure 5: Design for enhanced heat dissipation.
8. Warranty and Support
EXTRASTAR is committed to providing quality products and customer satisfaction.
- After-sales Service: If you have any questions, concerns, or require assistance with your EXTRASTAR 50W Security Outdoor Light, please feel free to contact us anytime. We will endeavor to resolve your issues promptly.
- Warranty Information: For specific warranty terms and conditions, please refer to the product packaging or the official EXTRASTAR website.