Xelletye Beam Moving Head DJ Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation of your Xelletye Beam Moving Head DJ Light. This powerful 100W LED 4-in-1 stage lighting unit features an RGB Halo Strip, 8 GOBO patterns, 8 colors, and 6 prisms, offering versatile lighting effects for various events. It supports 14CH DMX-512, Sound Activated, Automatic, and Master-Slave control modes.

Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance, maximizing the lifespan and performance of your device.

2. What's in the Box

Upon opening the package, please verify that all components listed below are present and in good condition:

• 1 x Stage Light
• 1 x Power Cord
• 1 x Signal Cable
• 1 x Hook Accessories
• 1 x Instruction Manual

3. Key Features

• Dazzling Halo Strip: Equipped with a Halo of 12x0.2W LED beads in red, green, and blue, creating point-controlled and circle-controlled marquee effects for a breathtaking visual experience.
• Super Bright Illumination: Features a powerful 100W LED bulb, 6 rotating prisms, 6 gobos, 2 white light gobos, and 7 colors plus white light. Offers 1-20Hz strobe effect and 0-100% linear dimming. (Beam angle: 4°, Best projection distance: 3-8M, CRI ≥ 95).
• Wide Lighting Coverage: The rotating moving head provides 540° pan and 270° tilt movement with a smart reset function, ensuring extensive coverage.
• Multiple Operation Modes: Supports 14CH DMX512, Master-Slave, Automatic, and Voice Control (Sound Activated) modes. A 4-digit numeric display allows for easy mode selection.
• Durable Design & Long Lifespan: Constructed with a sturdy sheet metal structure and plastic shell for fast heat dissipation and intelligent temperature control protection, ensuring a 50,000-hour working time.

4. Setup

4.1 Mounting

The unit comes with hook accessories for secure mounting. Ensure the mounting surface or truss can support the weight of the fixture. Always use safety cables when suspending the unit.

4.2 Power Connection

Connect the provided power cord to the "POWER IN" port on the rear of the unit and then to a suitable AC power outlet (2.4E+2 Volts AC). Ensure the power switch is in the OFF position before connecting.

4.3 DMX Connection (Optional)

For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port of the first fixture. For multiple fixtures, daisy-chain them by connecting the "DMX OUT" of the first fixture to the "DMX IN" of the next. Use the provided signal cable for DMX connections.

5. Operating Modes

The Xelletye Beam Moving Head DJ Light offers four primary operation modes, selectable via the 4-digit numeric display and control buttons (MENU, UP, DOWN, ENTER) on the unit's base.

• 5.1 DMX512 Control: This professional mode allows for precise control over all light functions (pan, tilt, color, gobo, strobe, dimming, halo effects) using a DMX controller. The unit supports 14 DMX channels. Refer to the DMX channel chart in the full instruction manual for detailed programming.
• 5.2 Sound Activated Mode: The built-in microphone detects ambient sound, allowing the light to synchronize its effects with the music's beat. This mode is ideal for parties and events where dynamic, music-driven lighting is desired.
• 5.3 Automatic Mode: The light cycles through pre-programmed patterns and effects automatically. This mode is suitable for quick setup and continuous, varied lighting displays without external control.
• 5.4 Master-Slave Mode: Connect multiple units via DMX cables. Set one unit as the "Master" and the others as "Slave" units. The Slave units will then mirror the Master's operations, creating a synchronized light show.

6. Technical Specifications

7. Safety Information

• General Safety: Always operate the device in a well-ventilated area. Do not block ventilation openings.
• Flammable Materials: Maintain a minimum distance of 0.20 meters (20 cm) from flammable materials to the surface of the light fixture.
• Temperature: The external surface of the light can reach a maximum temperature of 120°C (248°F). Avoid direct contact during operation.
• Electrical Safety: Ensure the power supply matches the specified voltage. Disconnect power before any cleaning or maintenance.
• Installation: Installation should be performed by qualified personnel. Ensure the fixture is securely mounted and safety cables are used.
• Eye Safety: Do not look directly into the light source when the fixture is operating, as it can cause eye damage.

8. Maintenance

• Cleaning: Regularly clean the lens and housing with a soft, lint-free cloth to maintain optimal brightness and clarity. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the light in a dry, dust-free environment to prevent accumulation of debris and potential damage.
• Inspection: Periodically inspect power cords, signal cables, and mounting hardware for any signs of wear or damage. Replace any damaged components immediately.

9. Troubleshooting

For issues not listed above or if troubleshooting steps do not resolve the problem, please contact Xelletye customer support.

10. Warranty and Support

Xelletye products are designed for reliability and performance. For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official Xelletye store on Amazon: Xelletye Store. We are committed to providing assistance within 24 hours for any inquiries.