1. Introduction
Thank you for choosing the Liphisy SST01 72-Inch Selfie Stick Tripod. This versatile device combines the functionality of a selfie stick and a tripod, designed for capturing photos and videos with ease. Please read this manual thoroughly before use to ensure proper operation and to maximize your product experience.
2. Product Components
The Liphisy SST01 includes the following main components:
- Extendable Pole (Selfie Stick)
- Integrated Tripod Base
- Adjustable Phone Holder
- Detachable Wireless Remote Control
Figure 2.1: Overview of the Liphisy SST01 Selfie Stick Tripod in various configurations, including selfie stick mode, tripod mode, and the detachable remote control.
3. Setup
3.1 Unfolding the Tripod Base
- Hold the main body of the selfie stick.
- Gently pull the bottom part downwards to release the tripod legs.
- Spread the three legs outwards until they form a stable base. Ensure the legs are fully extended and locked into place for maximum stability.
Figure 3.1: Detail of the tripod base, highlighting the aluminum alloy pole for enhanced stability.
3.2 Attaching Your Phone
- Locate the phone holder at the top of the stick.
- Gently pull the spring-loaded clamp upwards to open the holder.
- Insert your smartphone into the holder, ensuring it is securely gripped by both sides. The holder is compatible with devices ranging from 2.4 to 3.8 inches wide.
- The phone holder can rotate 360 degrees for portrait or landscape orientation, and the head can tilt 300 degrees for various angles. Adjust as needed.
Figure 3.2: Demonstrates the multi-angle capabilities of the phone holder, allowing for 360-degree rotation and 270-degree tilt.
3.3 Pairing the Wireless Remote Control
- Remove the wireless remote control from its slot on the handle.
- Turn on the remote control (usually a small switch on the side or back). A blue indicator light will flash, indicating it's in pairing mode.
- On your smartphone, go to Bluetooth settings and search for available devices.
- Select "SelfieCom" or a similar name from the list to pair. The indicator light will stop flashing once successfully paired.
- Open your phone's camera app. The remote control button will now trigger the shutter.
Figure 3.3: The detachable wireless remote control, compatible with both Android and iOS devices, shown alongside the phone holder and a 1/4" screw mount for additional accessories.
4. Operating Instructions
4.1 Using as a Selfie Stick
- Ensure the tripod legs are folded and secured within the handle.
- Extend the telescopic pole to your desired length. The pole can extend up to 72 inches.
- Adjust the phone holder angle for the best shot.
- Use the wireless remote control to capture photos or start/stop video recording.
4.2 Using as a Tripod
- Unfold the tripod legs as described in Section 3.1 and ensure they are stable on a flat surface.
- Extend the telescopic pole to the desired height. The tripod can reach a maximum height of 72 inches.
- Adjust the phone holder to the required angle and orientation.
- Use the wireless remote control to take hands-free photos or videos.
5. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, fold the tripod legs and retract the telescopic pole to its minimum length (11.8 inches) for compact storage. Store in a cool, dry place away from direct sunlight.
- Battery: The wireless remote control uses 1 Lithium Polymer battery (included). Replace the battery when the indicator light no longer illuminates or the remote fails to pair.
Figure 5.1: The compact design of the selfie stick tripod, ideal for travel and easy storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not pairing. | Battery low or off; Bluetooth not enabled on phone; out of range. | Ensure remote is on and charged. Enable Bluetooth on phone and try re-pairing. Move closer to the device. |
| Tripod unstable. | Legs not fully extended or locked; uneven surface. | Ensure all three legs are fully extended and locked. Place on a flat, stable surface. |
| Phone not fitting in holder. | Phone size exceeds limits. | Check phone dimensions (must be between 2.4-3.8 inches wide). |
7. Specifications
- Brand: Liphisy
- Model Name: SST01
- Material: Aluminum Alloy, Plastic
- Color: Black
- Maximum Height: 72 Inches
- Minimum Height (Folded): 11.8 Inches
- Item Weight: 1.4 Pounds
- Compatible Devices: Android Phone, Camera, iPhone (2.4-3.8 inches wide)
- Remote Control Battery: 1 Lithium Polymer battery (included)
- Tripod Head Type: Pan Heads
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Liphisy website. Keep your purchase receipt as proof of purchase for warranty claims.