1. Introduction
The ElecVoztile 8-Outlet Rack Mount PDU (Power Distribution Unit) is designed to provide reliable power distribution and surge protection for equipment within 19-inch standard server racks and cabinets. This unit features eight front-facing outlets, a 15A overload switch, and SPD (Surge Protective Device) technology to safeguard connected electronics from power spikes and surges. Its robust construction and extended power cord offer flexibility and durability for various professional and home environments.
2. Safety Information
- Read all instructions before use.
- Do not exceed the maximum electrical rating of 15A / 125V / 1875W.
- This device is intended for indoor use only. Do not expose to moisture.
- Ensure the PDU is connected to a properly grounded outlet.
- Do not disassemble the unit. Refer servicing to qualified personnel.
- Keep children away from the PDU and connected devices.
- Avoid running the power cord under carpets or in areas where it can be damaged.
3. Package Contents
Verify that all components are present upon unpacking:
- ElecVoztile 8-Outlet Rack Mount PDU
- Mounting Brackets (pre-attached or included)
- Mounting Screws (if applicable)
4. Product Features
- Rack Mountable Design: This 1U rackmount PDU power strip is compatible with 19-inch standard server racks and cabinets, featuring a horizontal rack mount form factor. It is suitable for rack enclosures, workshops, offices, and wall mounts, optimizing space within standard 19-inch racks.
- Surge Protection (SPD): Equipped with 1200 Joules of SPD surge protection, this 125V/15A rackmount unit protects sensitive equipment in data centers, network closets, and VoIP phone systems from power spikes and surges.
- Overload Protection: Features a built-in 15A overload switch and reset switch to ensure reliable performance and prevent damage from current overloads.
- Heavy-Duty Construction: The power distribution unit is constructed with robust components and housed in a durable aluminum alloy casing for long-lasting performance and reliable power management.
- Extended Power Cord: Includes a 10-foot (3 meter) 14AWG power cord, providing flexible placement options and extended reach for versatile installation.
5. Setup Instructions
5.1 Rack Mounting
- Identify an available 1U space in your standard 19-inch server rack or cabinet.
- Align the mounting brackets of the PDU with the rack posts.
- Secure the PDU to the rack using appropriate rack screws (not always included, check package contents). Ensure it is firmly attached.
5.2 Connecting to Power Source
- Ensure the PDU's power switch is in the 'OFF' position.
- Plug the PDU's 10-foot 14AWG power cord into a grounded 125V AC wall outlet or UPS.
- Verify that the power cord is not crimped or stressed, especially where it exits the unit.
6. Operating Instructions
6.1 Powering On/Off
To power on the PDU, press the red illuminated power switch to the 'ON' position. To power off, press the switch to the 'OFF' position.
6.2 Connecting Devices
Plug your electronic devices into the available 8 outlets on the front of the PDU. Ensure that the total current draw of all connected devices does not exceed 15A.
6.3 Overload Protection
The PDU is equipped with a 15A overload circuit breaker. If the total current draw exceeds 15A, the circuit breaker will trip, cutting power to all connected devices. To reset, disconnect some devices, then press the reset button on the overload switch.
6.4 Surge Protection Indicator
A small LED indicator next to the 'SPD Surge Protector' label illuminates when the surge protection is active and functioning correctly. If this light is off, it may indicate that the surge protection components have been compromised after a significant power surge, and the unit should be replaced to ensure continued protection.
7. Maintenance
- Cleaning: Disconnect the PDU from the power source before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the PDU casing for any signs of damage, fraying, or loose connections.
- Surge Protection Check: Regularly check the surge protection indicator light. If it is off, the surge protection may no longer be active, and the unit should be replaced.
8. Troubleshooting
- No Power to Devices:
- Ensure the PDU's power cord is securely plugged into a live wall outlet.
- Check if the PDU's main power switch is in the 'ON' position.
- Verify if the overload switch has tripped. If so, reduce the load by unplugging some devices and then press the reset button.
- Test the wall outlet with another device to confirm it has power.
- Surge Protection Indicator Light is Off:
- This indicates that the surge protection components may have absorbed a significant power surge and are no longer providing protection. While the PDU may still distribute power, it is recommended to replace the unit to ensure continued surge protection for your valuable equipment.
9. Specifications
| Feature | Specification |
|---|---|
| Model | 8-Outlet-Front Facing |
| Total Power Outlets | 8 |
| Voltage Rating | 125 Volts |
| Current Rating | 15 Amps |
| Max Power | 1875 Watts |
| Surge Protection | 1200 Joules (SPD) |
| Cord Length | 10 feet (3 meters) |
| Cord Gauge | 14 AWG |
| Form Factor | 1U Rackmount |
| Product Dimensions | 19 x 1.83 x 0.1 inches |
| Item Weight | 2.35 pounds |
| Housing Material | Aluminum Alloy |
10. Warranty and Support
ElecVoztile is committed to delivering superior products and outstanding customer service. This rackmount power strip is designed to meet safety standards, ensuring reliability. Should you encounter any issues or require assistance with your product, please do not hesitate to reach out to ElecVoztile customer support for immediate assistance. Specific warranty details may be available on the product packaging or the official ElecVoztile website.