ELEKICO UFO-350W-4Pack

ELEKICO UFO LED High Bay Light 350W Instruction Manual

Model: UFO-350W-4Pack

1. Introduction

Thank you for choosing the ELEKICO UFO LED High Bay Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting system. Please read these instructions carefully before use and retain them for future reference.

The ELEKICO 350W UFO LED High Bay Light delivers 52500 lumens of super bright 5000K illumination. Designed for durability and energy efficiency, it features enhanced heat dissipation and a robust aluminum housing, ensuring a long lifespan of over 50,000 hours. This product is suitable for various indoor commercial and industrial settings.

2. Product Components

  • UFO LED High Bay Light fixture
  • Pre-attached 5-foot power cord with US plug
  • Hanging hook
  • Safety rope
ELEKICO UFO LED High Bay Light

Figure 1: ELEKICO UFO LED High Bay Light, showcasing its compact design.

ELEKICO UFO LED High Bay Light with hook and power cord

Figure 2: The high bay light with its integrated hanging hook and 5-foot power cord.

3. Installation Instructions

3.1 Safety Precautions

  • Ensure power is disconnected before installation.
  • Installation should be performed by a qualified electrician if hardwiring is required.
  • Wear appropriate safety gear, including gloves and eye protection.
  • Ensure the mounting surface can support the weight of the fixture.

3.2 Mounting the Light Fixture

  1. Attach the provided hanging hook to the top of the light fixture by screwing it into the designated threaded hole.
  2. Securely attach the safety rope to the fixture and to a separate, sturdy anchor point on the ceiling or support structure. This provides an additional layer of safety in case the primary hanging mechanism fails.
  3. Hang the light fixture from a suitable ceiling hook or mounting point using the attached hanging hook.
Installation diagram for ELEKICO UFO LED High Bay Light

Figure 3: Diagram illustrating the hanging installation with hook, safety rope, and power cord connection.

3.3 Electrical Connection

  1. The light comes with a pre-attached 5-foot power cord with a standard US 3-prong plug.
  2. Plug the power cord directly into a compatible 110V AC grounded outlet.
  3. For permanent installations or if an outlet is not available, consult a qualified electrician for hardwiring options.

Video 1: An overview of the ELEKICO Super Bright LED High Bay Lights, demonstrating their brightness and ease of installation. This video is provided by the seller, HIGHLUX.

4. Operating Instructions

The ELEKICO UFO LED High Bay Light is designed for simple 'plug and play' operation. Once properly installed and connected to a power source, the light will illuminate when power is supplied to the outlet it is connected to. Control the light using the wall switch connected to the outlet or by plugging/unplugging the unit.

ELEKICO UFO LED High Bay Light illuminating a warehouse with 120-degree beam angle

Figure 4: The wide 120-degree beam angle of the high bay light effectively illuminates large spaces.

5. Maintenance

The ELEKICO UFO LED High Bay Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Cleaning: Periodically wipe the fixture with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
  • Inspection: Regularly check the hanging hook, safety rope, and power cord for any signs of wear, damage, or loose connections. Address any issues promptly.
  • Heat Dissipation: Ensure that the cooling fins on the back of the fixture are not obstructed to allow for proper heat dissipation.
Back of ELEKICO UFO LED High Bay Light showing cooling fins

Figure 5: The aluminum housing with cooling fins designed for enhanced heat dissipation.

6. Troubleshooting

If you encounter issues with your ELEKICO UFO LED High Bay Light, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Light does not turn onNo power to the outlet
Loose connection
Faulty fixture
Check the power source and circuit breaker.
Ensure the power cord is securely plugged in.
If issues persist, contact customer support.
Light is dim or flickersUnstable power supply
Overheating
Fixture damage
Verify stable power supply.
Ensure proper ventilation around the fixture.
Contact customer support if flickering continues or light remains dim.
Unusual noise or smellInternal component issueImmediately disconnect power. Do not attempt to repair. Contact customer support.

7. Specifications

FeatureSpecification
BrandELEKICO
Model NumberUFO-350W-4Pack
Wattage350 Watts
Brightness52500 Lumens
Light Color5000K (Cool White)
Voltage110 Volts (AC)
MaterialAluminum
LifespanUp to 50,000 hours
Beam Angle120 degrees
Indoor/Outdoor UsageIndoor use only
Dimensions (L x W x H)5"L x 12"W x 12"H
Control MethodApp (Note: Functionality may vary based on specific model and accessories)

8. Warranty and Support

ELEKICO offers a 5-year replacement warranty for damaged products. Please refer to the instructions for use for specific terms and conditions.

For any questions, technical assistance, or warranty claims, please contact ELEKICO customer service. Our team is available to provide support and ensure your satisfaction.

Customer Service: Available 7 days a week, 24 hours a day.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.