saschedross USB Cable Replacement for ONN DS417 DAB Radio User Manual

1. Product Overview

This manual provides instructions for the saschedross USB Cable, designed as a direct replacement for the ONN DS417 DAB Radio power supply cable. This high-quality cable ensures reliable power delivery to your device.

Key features include:

• High-quality construction for durable and reliable performance.
• Cable length: 3.0 feet, providing ample reach.
• Standard USB to DC barrel connector for powerline connectivity.

Figure 1: The saschedross USB Cable, featuring a standard USB-A connector on one end and a DC barrel connector on the other, designed for power input.

2. Setup Instructions

Follow these steps to correctly connect your saschedross USB Cable to the ONN DS417 DAB Radio:

1. Identify Connectors: Locate the USB-A end of the cable and the DC barrel connector end.
2. Connect to Radio: Insert the DC barrel connector firmly into the power input port on your ONN DS417 DAB Radio. Ensure it is fully seated.
3. Connect to Power Source: Insert the USB-A end of the cable into a compatible USB power adapter (e.g., a wall charger, computer USB port, or power bank). The power source should provide sufficient power for the radio.
4. Power On: Once connected, power on your ONN DS417 DAB Radio as per its own operating instructions.

Figure 2: The saschedross USB Cable in a coiled state, showing both the USB-A and DC barrel connectors, ready for connection.

3. Operating Instructions

The saschedross USB Cable functions as a power supply cable. Once properly connected as described in the "Setup Instructions" section, the cable will provide power to your ONN DS417 DAB Radio. There are no specific operational controls on the cable itself.

• Ensure the cable is securely connected at both ends for uninterrupted power.
• The radio's power indicator should illuminate, confirming power reception.

4. Maintenance

Proper maintenance extends the life of your USB cable:

• Cleaning: Gently wipe the cable and connectors with a dry, soft cloth to remove dust or debris. Avoid using liquid cleaners directly on the connectors.
• Storage: When not in use, coil the cable loosely. Avoid sharp bends or kinks, which can damage internal wires. Store in a cool, dry place away from direct sunlight.
• Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the wire connections.
• Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the insulation or connectors. Discontinue use if damage is observed.

5. Troubleshooting

If your ONN DS417 DAB Radio is not receiving power or functioning correctly after connecting the saschedross USB Cable, consider the following:

• Radio Not Powering On:
  • Ensure both the DC barrel connector and the USB-A connector are fully and securely inserted into their respective ports.
  • Verify that the USB power adapter or source is functional and providing power (e.g., try plugging another device into the same USB port).
  • Confirm that the ONN DS417 DAB Radio itself is in good working order and its power button is engaged.
• Intermittent Power:
  • Check for any loose connections at either end of the cable.
  • Inspect the cable for visible damage, such as kinks or frayed insulation. A damaged cable may cause intermittent power.

If troubleshooting steps do not resolve the issue, please refer to the "Warranty & Support" section for further assistance.

6. Specifications

7. Warranty & Support

For warranty information or technical support regarding your saschedross USB Cable, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: Shenzhen Waweis Technology Co., Ltd

For further assistance, you may visit the product page on Amazon: Amazon Product Page