Fisherg Wireless Pro Switch Controller User Manual

1. Introduction

Thank you for purchasing the Fisherg Wireless Pro Switch Controller. This controller is designed to enhance your gaming experience on Nintendo Switch, Switch OLED, and Switch Lite consoles, offering advanced features such as colorful LED lighting, precise motion control, adjustable vibration, and customizable turbo functions. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Safety Information

• Do not expose the controller to extreme temperatures, humidity, or direct sunlight.
• Avoid dropping or subjecting the controller to strong impacts.
• Do not attempt to disassemble or modify the controller. This will void the warranty.
• Keep out of reach of small children.
• Use only the provided charging cable or a certified equivalent.

3. Package Contents

• Fisherg Wireless Pro Switch Controller
• USB-C Charging Cable
• User Manual

4. Product Overview

Familiarize yourself with the various buttons and features of your new controller.

Figure 4.1: Front view of the Fisherg Wireless Pro Switch Controller, showcasing its purple and black design with flame accents and illuminated joysticks.

• Left/Right Analog Sticks: For movement and camera control.
• D-Pad: Directional input.
• A/B/X/Y Buttons: Action buttons.
• L/R/ZL/ZR Buttons: Shoulder and trigger buttons.
• HOME Button: Returns to the console's home screen, also for wake-up function.
• + / - Buttons: Start/Select functions.
• Screenshot Button: Captures screenshots.
• T (Turbo) Button: Activates and adjusts turbo function.
• LED Control Button: Cycles through LED lighting modes and colors.

5. Setup

5.1 Charging the Controller

Before first use, fully charge the controller. The controller features an 800mAh rechargeable battery, providing up to 15 hours of playtime on a single charge. A full charge takes approximately 2.5 hours.

1. Connect the USB-C charging cable to the controller's charging port.
2. Connect the other end of the cable to a USB power source (e.g., Nintendo Switch dock, computer USB port, or USB wall adapter).
3. The LED indicators on the controller will show charging status and turn off when fully charged.

Figure 5.1: Battery and charging information for the controller.

5.2 Pairing with Nintendo Switch/OLED/Lite

The controller offers convenient quick pairing for hassle-free connection.

1. From the Nintendo Switch HOME Menu, select Controllers > Change Grip/Order.
2. On the controller, press and hold the HOME button for 3-5 seconds until the LED indicators start flashing rapidly.
3. Once paired, the corresponding player LED(s) on the controller will light up solid.
4. To disconnect, simply turn off the controller or the console.

Figure 5.2: Controller compatibility with various platforms.

6. Operating Instructions

6.1 LED Lighting Modes

The controller features colorful breathing LED lights with 9 dynamic colors and 3 lighting modes to enhance your gaming atmosphere.

• Press the LED Control Button (usually located near the right analog stick) to cycle through different colors and lighting modes (Palette, Breathe, Rainbow Breathe).
• Hold the LED Control Button to turn the LED lights off or on.

Figure 6.1: Available LED colors and lighting modes.

6.2 Vibration Adjustment

Experience realistic feedback with dual vibration motors and a super-sensitive 6-axis gyro sensor. The vibration intensity can be adjusted to 4 levels: None, Weak, Moderate, and Strong.

• To adjust vibration, press and hold the T (Turbo) button and then press the D-Pad Up or D-Pad Down to increase or decrease vibration intensity.

Figure 6.2: Vibration levels and gyro sensor functionality.

6.3 Turbo Function

The turbo function allows for rapid, continuous pressing of a button. There are 3 adjustable turbo speeds: 5 shots/s, 12 shots/s, and 20 shots/s.

1. Setting Turbo: Press and hold the T (Turbo) button, then press the button you wish to set to turbo (e.g., A, B, X, Y, L, R, ZL, ZR). The turbo function is now active for that button.
2. Adjusting Turbo Speed: With the turbo function active for a button, press and hold the T (Turbo) button and then press the D-Pad Left or D-Pad Right to cycle through the turbo speeds.
3. Clearing Turbo: To clear the turbo function for a specific button, press and hold the T (Turbo) button and press the turbo-enabled button again. To clear all turbo settings, press and hold the T (Turbo) button for 5 seconds.

Figure 6.3: Turbo function and speed settings.

6.4 Wake-up Function

The controller includes a Home button with a wake-up function, allowing you to quickly return to your game console.

• When the Nintendo Switch console is in sleep mode, simply press the HOME button on the controller to wake up the console and reconnect the controller.

6.5 Screenshot Function

Capture your favorite in-game moments instantly.

• Press the Screenshot Button (located below the right analog stick) to take a screenshot.

7. Maintenance

• Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Store the controller in a cool, dry place away from direct sunlight when not in use.
• Avoid prolonged exposure to dust and dirt.

8. Troubleshooting

9. Specifications

• Model: Wireless Pro Switch Controller
• Connectivity: Wireless
• Battery Capacity: 800mAh
• Charging Time: Approx. 2.5 hours
• Playtime: Up to 15 hours
• Compatibility: Nintendo Switch, Switch OLED, Switch Lite
• Features: LED Joystick, 6-axis Gyro Sensor, Dual Vibration Motors, Turbo Function, Wake-up Function, Screenshot
• Dimensions: 6.57 x 4.69 x 2.87 inches (approximate)
• Weight: 9.9 ounces (approximate)

10. Warranty and Support

Fisherg products are manufactured to high quality standards. For any issues or questions regarding your controller, please contact Fisherg customer support through the retailer where you purchased the product or visit the official Fisherg website for assistance.

Please retain your proof of purchase for warranty claims.