1. Introduction
Thank you for choosing the KCO Lighting Brass Gold Wall Sconces. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixtures. Please read these instructions thoroughly before beginning installation and retain them for future reference.
A pair of KCO Lighting Brass Gold Wall Sconces featuring a brushed brass finish and light yellow glass globes.
2. Product Overview
2.1 Components Included
- Brass Gold Wall Sconce Fixture (2 units)
- Light Yellow Glass Globe Lampshade (2 units)
- E26 Light Bulb (2 units)
- Mounting Hardware Kit
- Instruction Manual
2.2 Dimensions
Detailed dimensions of the wall sconce, including width (11.2 inches / 28.5 cm), height (9.8 inches / 25 cm), globe diameter (7.9 inches / 20 cm), and canopy diameter (4.7 inches / 12 cm). Also highlights the antique brass lamp body, light yellow glass lampshade, and E26 light bulb.
- Width: 11.2 inches (28.5 cm)
- Height: 9.8 inches (25 cm)
- Globe Diameter: 7.9 inches (20 cm)
- Canopy Diameter: 4.7 inches (12 cm)
3. Safety Information
To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.
- All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
- Use only E26 base bulbs with a maximum wattage of 60W.
- Do not touch the bulb directly with bare hands, as oils can shorten bulb life.
- Allow the fixture to cool before replacing the bulb.
4. Installation Instructions
These wall sconces are designed for hardwired installation. Please ensure power is disconnected before proceeding.
4.1 Tools Required (Not Included)
- Screwdriver
- Wire Strippers
- Electrical Tape
- Pliers
- Safety Glasses
4.2 Step-by-Step Installation
- Turn off Power: Locate the circuit breaker or fuse box and turn off the power to the wall switch location.
- Prepare Mounting: Remove the old fixture (if applicable) and ensure the junction box is clean and ready for installation.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws.
- Wire Connections: Connect the fixture's wires to the house wires according to electrical codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections and wrap with electrical tape for added safety.
- Mount Fixture: Carefully push the wired fixture onto the mounting plate and secure it with the provided screws.
- Install Glass Globe: Gently attach the glass globe lampshade to the fixture.
- Insert Bulb: Screw the E26 bulb into the socket.
- Restore Power: Turn the power back on at the circuit breaker.
4.3 Up and Down Installation Flexibility
The design of these sconces allows for versatile installation, enabling the glass globe to face either upwards or downwards to suit your aesthetic preference and lighting needs. When installing, simply orient the fixture as desired before securing it to the mounting plate.
Video demonstrating the flexible up and down installation options for the KCO Lighting wall sconce, showcasing how it can be oriented to direct light upwards or downwards.
Visual examples of the wall sconce installed with the glass globe facing upwards (Up Install) and downwards (Down Install), illustrating its adaptability in various home environments.
5. Operating Instructions
Once installed, operate the wall sconces using your standard wall switch. The included E26 bulb provides warm white light at 3000 Kelvin and 450 lumens.
5.1 Dimmability
The fixture itself is not dimmable. However, it can be made dimmable by using a compatible dimmable E26 bulb and a suitable dimmable wall switch (both sold separately).
An image demonstrating the visual difference when the wall sconce is turned off versus turned on, showcasing the warm light emitted.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall sconces.
- Cleaning: Turn off the power before cleaning. Use a soft, dry cloth to wipe the metal and glass surfaces. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure the fixture is cool and power is off before replacing the bulb. Unscrew the old E26 bulb and screw in a new one.
7. Troubleshooting
If you encounter any issues with your wall sconces, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture, loose wiring, faulty bulb, faulty switch. | Check circuit breaker/fuse. Ensure all wire connections are secure. Replace bulb. Test wall switch. |
| Light flickers. | Loose bulb, incorrect bulb type, loose wiring. | Tighten bulb. Ensure bulb is E26 and within wattage limits. Check wiring connections. |
| Dimming not working. | Non-dimmable bulb, non-dimmable switch. | Ensure both the bulb and the wall switch are rated for dimming. |
If these solutions do not resolve the issue, please contact KCO Lighting customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | KCO Lighting |
| Model Name | W1101-Y-2PC |
| Color | Yellow-2PC (Brass Gold finish with Yellow Glass) |
| Material | Glass, Metal |
| Style | Contemporary / Mid-Century |
| Light Fixture Form | Sconce |
| Room Type | Bedroom, Bathroom, Hallway, Entryway, Corridor |
| Product Dimensions (L x W x H) | 11.2" x 7.9" x 9.8" (28.5cm x 20cm x 25cm) |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Flush Mount (Hardwired) |
| Light Source Type | LED (E26 Bulb Included) |
| Finish Type | Brushed |
| Number of Light Sources | 1 per sconce |
| Voltage | 100-250 Volts (Worldwide compatible) |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Brightness | 450 Lumens |
| Wattage | 60 watts (Max) |
| Bulb Base | E26 |
| Water Resistance Level | Not Water Resistant |
| Assembly Required | Yes |
| Item Weight | 5.81 pounds (for the set) |
9. Warranty and Support
KCO Lighting is committed to providing high-quality products and excellent customer service.
9.1 Warranty Information
We offer a 3-year warranty for these wall sconces. If you receive defective light fixtures or are missing any parts, please contact us immediately for assistance.
9.2 Customer Support
For any questions, concerns, or support needs, please communicate with the seller "KCO Lighting" via your order number. We aim to provide a solution within 24 hours.
Video showcasing the KCO Lighting Gold Globe Wall Sconce in various home settings, highlighting its design and aesthetic appeal.