Faria KT9797
Faria Beede Instruments KT9797 Inboard Dress White 6-Gauge Boxed Set User Manual
Model: KT9797 | Brand: Faria
Product Overview
The Faria Beede Instruments KT9797 Inboard Dress White 6-Gauge Boxed Set is designed for marine applications, providing essential vessel information through a comprehensive set of electromechanical gauges. This set features a clean, dress white aesthetic with perimeter-lighted white dials, bold black graphics, white aluminum bezels, contoured black pointers, and flat glass lenses for clear readability.
The boxed set includes the following gauges:
- Speedometer (55 MPH) Mechanical
- Tachometer (6000 RPM)
- Fuel Level Gauge
- Voltmeter (10-16 VDC)
- Water Temperature Gauge (100-250°F)
- Oil Pressure Gauge (80 PSI)
Image: The Faria Beede Instruments KT9797 Inboard Dress White 6-Gauge Boxed Set, showing all six gauges: Tachometer, Speedometer, Water Temperature, Oil Pressure, Voltmeter, and Fuel Level.
Package Contents
Upon opening the package, verify that all components are present and undamaged. The Faria KT9797 Inboard 6-Gauge Boxed Set - Dress White includes:
- 1x Speedometer (55 MPH) Mechanical
- 1x Tachometer (6000 RPM)
- 1x Fuel Level Gauge
- 1x Voltmeter (10-16 VDC)
- 1x Water Temperature Gauge (100-250°F)
- 1x Oil Pressure Gauge (80 PSI)
- Necessary mounting hardware and wiring instructions (refer to specific gauge manuals for detailed wiring diagrams).
Installation and Setup
Proper installation is crucial for the accurate and safe operation of your Faria Beede gauges. It is recommended that installation be performed by a qualified marine technician.
Safety Precautions:
- Disconnect the vessel's battery before beginning any electrical work.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Use appropriate tools and personal protective equipment.
Mounting Instructions:
- Select a suitable location on the dashboard or instrument panel that provides clear visibility and access.
- Cut the appropriate size mounting holes for each gauge. Refer to individual gauge specifications for exact hole diameters.
- Insert each gauge into its respective mounting hole from the front of the panel.
- Secure the gauges using the supplied mounting brackets and nuts from the rear of the panel. Tighten firmly but do not overtighten.
Wiring Connections:
Each gauge requires specific electrical connections for power, ground, and signal input. While general wiring principles apply, always consult the detailed wiring diagrams provided with each individual gauge for precise connections to your vessel's electrical system and sensors.
- Power (Ignition): Connect to a switched 12V DC power source.
- Ground: Connect to a reliable vessel ground point.
- Sender/Signal: Connect to the corresponding engine or tank sender unit (e.g., oil pressure sender, water temperature sender, fuel level sender, tachometer signal from ignition/alternator).
- Illumination: Connect to the vessel's navigation light circuit for gauge backlighting.
Note: The Speedometer is mechanical and typically connects to a pitot tube or similar mechanical pickup, not electrical wiring for its primary function, though it may have an illumination wire.
Operating Instructions
Once properly installed and wired, the Faria Beede gauges operate automatically when the vessel's ignition is turned on. Observe the readings to monitor critical engine and vessel parameters.
Understanding Gauge Readings:
- Speedometer: Displays vessel speed in Miles Per Hour (MPH). Ensure the pitot tube is clear and unobstructed for accurate readings.
- Tachometer: Indicates engine revolutions per minute (RPM). Monitor RPM to ensure the engine is operating within its recommended range.
- Fuel Level: Shows the approximate fuel level in the tank (Empty to Full).
- Voltmeter: Displays the vessel's electrical system voltage (10-16 VDC). A healthy system typically reads around 12-14 VDC when the engine is running.
- Water Temperature: Monitors engine coolant temperature (100-250°F). Normal operating temperature varies by engine; consult your engine manual.
- Oil Pressure: Shows engine oil pressure (0-80 PSI). Low oil pressure can indicate a serious engine issue.
Regularly check all gauge readings during operation to detect any anomalies early. Significant deviations from normal operating ranges should be investigated immediately.
Maintenance
The Faria Beede KT9797 gauges are designed for durability and require minimal maintenance. Regular inspection and cleaning will help ensure their longevity and accurate performance.
Cleaning:
- Clean the gauge bezels and lenses with a soft, damp cloth.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or lens.
- For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp cloth.
Inspection:
- Periodically check all wiring connections for corrosion, looseness, or damage.
- Ensure mounting nuts and brackets are secure.
- Inspect the gauge lenses for cracks or fogging.
- For the speedometer, ensure the pitot tube (if applicable) is clear of debris and not damaged.
Troubleshooting
If you experience issues with your Faria Beede gauges, consult the following common troubleshooting steps. For complex issues, professional assistance is recommended.
| Problem | Possible Cause | Solution |
|---|---|---|
| Gauge not working (no reading, no backlight) | No power, poor ground, blown fuse, faulty wiring. | Check power supply to the gauge, verify ground connection, inspect fuses in the circuit, check for loose or corroded wires. |
| Inaccurate reading | Faulty sender unit, incorrect wiring, gauge calibration issue (rare). | Verify sender unit operation (e.g., test resistance for fuel/temp/oil senders), re-check wiring against diagrams. For speedometer, check pitot tube for blockages. |
| Gauge needle erratic or fluctuating | Loose connection, intermittent sender signal, electrical interference. | Secure all connections, inspect sender wiring, ensure proper grounding. |
| Backlight not working | Blown bulb (if replaceable), faulty illumination wire, no power to illumination circuit. | Check illumination wire connection, verify power to the illumination circuit (e.g., navigation lights), replace bulb if applicable. |
Specifications
The following specifications apply to the Faria Beede Instruments KT9797 Inboard Dress White 6-Gauge Boxed Set:
- Model Number: KT9797
- Brand: Faria
- Material: Aluminum, Glass
- Product Dimensions (Boxed Set): Approximately 21 x 10 x 6 inches (L x W x H)
- Item Weight (Boxed Set): Approximately 4 Pounds
- Gauge Face Diameter: 6 Inches (referring to the largest gauges, specific individual gauge sizes may vary slightly)
- Included Gauges:
- Speedometer: 55 MPH (Mechanical)
- Tachometer: 6000 RPM
- Fuel Level
- Voltmeter: 10-16 VDC
- Water Temperature: 100-250°F
- Oil Pressure: 80 PSI
- Bezel Color: White
- Dial Color: White with bold black graphics
- Lens Type: Flat Glass
Warranty and Support
Specific warranty information for Faria Beede Instruments products is typically provided with the product packaging or available on the manufacturer's official website. It is recommended to retain your proof of purchase for warranty claims.
For technical support, installation assistance, or warranty inquiries, please contact Faria Beede Instruments directly through their official customer service channels. Contact information can usually be found on their website or in the documentation included with your product.
Note: Unauthorized modifications or improper installation may void the product warranty.