CYCYHEAT RTAX-013S

CYCYHEAT Heated Vest Instruction Manual

Model: RTAX-013S

Introduction

Thank you for choosing the CYCYHEAT Heated Vest. This manual provides essential information for the safe and efficient use of your heated vest. Please read it thoroughly before first use and keep it for future reference. This vest is designed to provide warmth and comfort in cold conditions, featuring carbon fiber heating elements and a 4-in-1 control system.

Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition.

Package contents including heated vest, battery, and carrying bag

Image Description: This image displays the typical contents of the CYCYHEAT Heated Vest package. It shows one heated vest, one 12000mAh battery, and one carrying bag.

Setup and First Use

  1. Charge the Battery: Before first use, fully charge the provided 12000mAh power bank. Connect the power bank to a suitable USB charger using the charging cable (not always included, use a standard USB cable). The indicator lights on the power bank will show the charging status.
  2. Connect the Battery: Locate the battery pocket inside the vest. Insert the fully charged power bank into the pocket and connect it to the vest's power cable.
    Detail of battery pocket and control buttons

    Image Description: This image shows close-ups of the vest's features, including the comfortable cuffs, skin-friendly fabric, the 4-in-1 temperature control buttons, and the internal battery pocket with the power bank connected.

  3. Wear the Vest: Put on the vest. Ensure it fits comfortably and allows for free movement.

Operating Instructions

Power On/Off and Temperature Control

The vest features a 4-in-1 control system with a central power button and three additional buttons for zone-specific heating.

  1. Power On: Press and hold the central power button for 2-3 seconds until the indicator light illuminates. The vest will typically start heating at a medium setting.
  2. Adjust Temperature Levels: Once powered on, press the central button briefly to cycle through the three temperature settings:
    • High (Red Light): Approximately 50-55 °C (122-131 °F) - Provides intense warmth for up to 3 hours.
    • Medium (Blue Light): Approximately 45-50 °C (113-122 °F) - Provides comfortable warmth for up to 5 hours.
    • Low (Green Light): Approximately 40-45 °C (104-113 °F) - Provides gentle warmth for up to 10 hours.
    Control button with three temperature settings indicated by colors and temperatures

    Image Description: This image illustrates the 3-level heating control. It shows the vest's control button and corresponding temperature ranges for High (red, 50-55°C), Medium (blue, 45-50°C), and Low (green, 40-45°C) settings.

  3. Zone-Specific Heating: The three additional buttons control heating elements in specific areas: neck, back, and abdomen. Press each of these buttons to activate or deactivate heating in the respective zone. This allows for customized warmth distribution.
  4. Power Off: Press and hold the central power button again for 2-3 seconds until all indicator lights turn off.

Heating Zones

The CYCYHEAT Heated Vest features eight strategically placed carbon fiber heating elements to provide comprehensive warmth to core body areas.

Diagram showing 8 heating zones on the front and back of the vest

Image Description: This diagram highlights the eight heating zones within the vest. It shows four heating elements on the front (chest and abdomen) and four on the back (neck, upper back, and lower back), ensuring full body warmth.

Maintenance and Care

Proper care will extend the life of your heated vest.

Troubleshooting

ProblemPossible CauseSolution
Vest not heatingBattery not connected or discharged. Vest not powered on.Ensure the power bank is fully charged and securely connected. Press and hold the central power button for 2-3 seconds to turn on.
Heating is weak or inconsistentLow battery charge. Incorrect temperature setting. Specific zone deactivated.Recharge the power bank. Adjust to a higher temperature setting. Ensure desired heating zones are activated using their respective buttons.
Battery drains quicklyHigh temperature setting used continuously. Extreme cold conditions.Lower the temperature setting when maximum heat is not required. Ensure the vest is worn under an outer layer for better insulation.

Specifications

Sizing Chart

Please refer to the following chart to select the appropriate size. Measurements are approximate and may vary slightly.

Sizing chart for the heated vest with measurements in cm

Image Description: This image displays a detailed sizing chart for the heated vest. It includes measurements in centimeters for Bust, Shoulder, Hips, and Length across various sizes (S, M, L, XL, XXL).

SizeBust (cm)Shoulder (cm)Hips (cm)Length (cm)
S99429965
M1084410866
L1184611867
XL1214812168
XXL1315113170

Note: All measurements are taken manually and may have a 1-2 cm error. Please consider the actual size.

Safety Information