JoyToy Warhammer 40k The Horus Heresy Space Wolves 1/18 Scale Collectible Action Figure User Manual

Introduction

Welcome to the official user manual for your JoyToy Warhammer 40k The Horus Heresy Space Wolves Varagyr Wolf Guard Squad collectible action figures. These highly detailed 1/18 scale figures are designed for display and careful posing by collectors aged 15 and up. Please read this manual thoroughly to ensure proper handling and care of your figures.

Image: The complete JoyToy Warhammer 40k Space Wolves Varagyr Wolf Guard Squad, showcasing the five highly detailed collectible action figures in a group formation.

Important Safety Warning

This product is a collectible action figure and NOT A TOY. It contains small parts and is intended for adult collectors aged 15 years and older. Keep out of reach of children under 15 years of age to prevent choking hazards and potential damage to the product.

Image: A warning label explicitly stating in English and other languages: "WARNING This is not a toy."

Package Contents

Your JoyToy Warhammer 40k The Horus Heresy Space Wolves Varagyr Wolf Guard Squad package includes the following items:

• 5 x 1/18 Scale Space Wolves Varagyr Wolf Guard Action Figures
• Assorted interchangeable hands (e.g., open hands, weapon-holding hands)
• Various character-specific weapons (e.g., chainaxes, power fists, bolters)
• Additional accessories (e.g., shoulder pads, decorative elements)

Please inspect all contents upon opening the package to ensure everything is present and undamaged. If any items are missing or damaged, please contact customer support.

Setup and Assembly

Your figures come largely pre-assembled, but some accessories may require attachment. Handle all parts with care to avoid breakage.

1. Unboxing: Carefully remove each figure and its accessories from the packaging. Retain the packaging for future storage or transport.
2. Attaching Hands: Gently pull off the existing hands (if any) and push the desired interchangeable hands onto the wrist pegs. Apply gentle, even pressure. If a joint is stiff, you may carefully warm it slightly with a hairdryer on a low setting for a few seconds to make it more pliable.
3. Attaching Weapons: Insert the weapon handles into the designated weapon-holding hands. Ensure a snug fit without forcing.
4. Other Accessories: Attach any additional armor pieces or decorative elements as shown in product images. These typically snap into place or fit over existing parts.

Image: Three Space Wolves figures posed dynamically, demonstrating the articulation and accessory integration possible with the figures.

Operating and Posing

These figures feature multiple points of articulation, allowing for a wide range of dynamic poses. When posing your figures, always apply gentle and even pressure to the joints.

• Joint Movement: Move joints slowly and deliberately. Avoid sudden or forceful movements, especially when moving a joint for the first time.
• Stiff Joints: If a joint feels excessively stiff, do not force it. Gently warm the joint area with a hairdryer on a low setting for 5-10 seconds, then attempt to move it again. This can help loosen the plastic.
• Loose Joints: If a joint is too loose to hold a pose, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the peg and allowed to dry. This will add friction. Apply sparingly and test before fully drying.
• Stability: For complex or dynamic poses, ensure the figure is balanced. You may need to adjust the feet and leg positions to maintain stability.

Maintenance and Care

Proper care will preserve the quality and longevity of your collectible figures.

• Cleaning: Dust figures regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen a cloth with plain water (no harsh chemicals) and gently wipe the affected area. Avoid excessive moisture.
• Storage: Store figures away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to sunlight can cause paint fading or plastic degradation.
• Handling: Always handle figures by their main body parts, avoiding excessive pressure on delicate accessories or thin limbs.

Troubleshooting

Here are solutions to common issues you might encounter:

Product Specifications

• Product Dimensions: 3 x 3 x 1.9 inches (per figure, approximate)
• Item Weight: 3 ounces (per figure, approximate)
• ASIN: B0D6BHWDP1
• Item Model Number: LEBOO_SpaceWolves
• Manufacturer Recommended Age: 15 years and up
• Manufacturer: Bloomage Joytoy(Beijing) Technology Development Co.,Ltd

Warranty and Support

For any inquiries, issues, or warranty claims regarding your JoyToy Warhammer 40k figures, please contact the seller, Leboo, directly through the platform where you made your purchase. They will be able to provide assistance in accordance with their return and warranty policies.

Please retain your proof of purchase for any warranty-related requests.