Dr.isla EB11 Electric Breast Pump User Manual

1. Introduction

The Dr.isla EB11 Electric Breast Pump is designed to provide efficient and comfortable milk expression for mothers. This manual provides essential information on the safe operation, assembly, cleaning, and maintenance of your breast pump. Please read this manual thoroughly before first use and retain it for future reference.

2. Important Safety Information

• Always inspect all components before each use for any damage or wear. Discard and replace any damaged parts immediately.
• Ensure all parts that come into contact with breast milk are made from food-grade, BPA-free materials, as is the case with the Dr.isla EB11.
• Do not immerse the main pump unit in water or other liquids. Clean the main unit with a damp cloth only.
• Keep the device out of reach of children.
• Use only the provided charging cable and adapter.
• If you experience pain or discomfort during pumping, stop immediately and consult a healthcare professional.
• The anti-reflux design prevents milk from flowing back into the motor, ensuring hygiene. Do not attempt to modify this system.

3. Package Contents

The Dr.isla EB11 Electric Breast Pump package typically includes the following items:

• Main Pump Unit (with control panel)
• Silicone Breast Flange (106-degree wide angle)
• Connector
• 180ml Milk Collection Bottle
• Nipple with Cap
• USB Charging Cable
• User Manual

This image displays the complete Dr.isla EB11 Electric Breast Pump system, including the main pump unit, a 180ml milk collection bottle, a nipple for feeding, and USB charging cables.

4. Product Components

Familiarize yourself with the various parts of your Dr.isla EB11 breast pump:

• Main Pump Unit: Houses the motor, battery, and control panel.
• Silicone Breast Flange: The part that comes into contact with the breast, designed for comfort and efficient suction.
• Connector: Connects the flange to the milk collection bottle and the main pump unit.
• Milk Collection Bottle: Collects expressed milk.
• Duckbill Valve: A one-way valve that ensures milk flows into the bottle and prevents backflow.
• Silicone Diaphragm: Creates a closed system for hygienic pumping and prevents milk from entering the tubing/motor.

This image illustrates the ergonomic design of the breast flange, featuring a 106-degree wide angle to ensure a comfortable and secure fit, which helps in reducing compression and promoting efficient milk flow.

This diagram details the advanced anti-reflux system, which includes a gas-liquid separation silicone membrane and a one-way flow duckbill valve. This design prevents milk backflow into the pump unit, ensuring hygiene and protecting the device.

5. Assembly and First Use

5.1. Assembly

1. Ensure all parts are clean and sterilized before assembly (refer to Section 7).
2. Insert the duckbill valve firmly into the bottom of the connector.
3. Place the silicone diaphragm onto the top of the connector, ensuring a tight seal.
4. Screw the milk collection bottle onto the bottom of the connector.
5. Attach the silicone breast flange to the connector.
6. Finally, connect the assembled breast pump unit to the main pump unit, ensuring it clicks securely into place.

5.2. Charging

Before first use, fully charge the breast pump. Connect the USB charging cable to the main pump unit and plug the other end into a suitable USB power source (e.g., wall adapter, power bank). The LED display will indicate charging status. A full charge typically takes a few hours.

6. Operating Instructions

The Dr.isla EB11 features an intuitive control panel with an LED display and easy-to-use buttons.

This image highlights the intuitive control panel of the Dr.isla EB11, featuring an LED display for time and settings, and buttons for power, mode selection, and adjusting the 9 suction levels. It also illustrates the three distinct operating modes: Massage, Expression, and Blend (Hybrid).

6.1. Power On/Off

• Press and hold the Power button (usually indicated by a circle icon) to turn the pump ON or OFF.
• The LED display will light up, showing the current mode, suction level, and pumping time.

6.2. Selecting Modes

The Dr.isla EB11 offers three distinct pumping modes:

• Massage Mode (M): Designed to stimulate milk let-down with gentle, rapid suction. Use this mode for 2-5 minutes at the beginning of each pumping session. It has 9 adjustable levels.
• Expression Mode (+): Provides a slower, stronger suction to efficiently express milk once let-down has occurred. It has 9 adjustable levels.
• Hybrid Mode (Blend): Combines elements of both massage and expression for a personalized and comfortable experience. It also has 9 adjustable levels.

Press the Mode button (often labeled 'M' or a wave icon) to cycle through the available modes.

6.3. Adjusting Suction Levels

Each mode has 9 adjustable suction levels. Use the '+' and '-' buttons on the control panel to increase or decrease the suction intensity to your comfort level. Start with a lower level and gradually increase until you find a comfortable yet effective setting.

6.4. Pumping Session

A typical pumping session lasts 15-20 minutes per breast. The pump may have an automatic shut-off feature after a set duration. Monitor the milk flow and adjust settings as needed.

7. Cleaning and Sterilization

Proper cleaning and sterilization are crucial for maintaining hygiene and the longevity of your breast pump. All parts that come into contact with breast milk are dishwasher-safe.

This image shows the breast pump disassembled into its individual components, such as the flange, connector, and bottle, emphasizing the ease with which each part can be separated for thorough cleaning and sterilization. All parts are made from food-grade materials.

7.1. After Each Use

1. Disconnect the main pump unit from the assembled breast pump.
2. Disassemble all parts that came into contact with breast milk (flange, connector, duckbill valve, silicone diaphragm, bottle).
3. Rinse these parts under cold running water to remove any milk residue.
4. Wash thoroughly with warm soapy water using a dedicated brush.
5. Rinse again with clean water.
6. Air dry on a clean drying rack or use a clean cloth.
7. Wipe the main pump unit with a clean, damp cloth. Do not submerge.

7.2. Sterilization (Once Daily)

Sterilize all milk-contacting parts using one of the following methods:

• Boiling: Place parts in a pot of boiling water for 5 minutes.
• Steam Sterilizer: Use a microwave or electric steam sterilizer according to its instructions.
• Dishwasher: Place parts on the top rack of a dishwasher.

8. Troubleshooting

9. Product Specifications

10. Warranty and Support

Dr.isla products are manufactured under strict quality control standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Dr.isla website. If you encounter any issues or require assistance, please contact Dr.isla customer support through the contact information provided on the product packaging or website.