1. Introduction
This manual provides essential information for the iBUYPOWER Trace Mesh Gaming PC Desktop Computer, Model TMI7N4601. It covers initial setup, operational guidelines, maintenance procedures, and troubleshooting tips to ensure optimal performance and longevity of your system. Please read this manual thoroughly before operating your PC.

Figure 1: iBUYPOWER Trace Mesh Gaming PC Desktop Computer with included keyboard and mouse.
2. What's in the Box
Upon unboxing your iBUYPOWER Trace Mesh Gaming PC, verify that all the following components are present:
- iBUYPOWER Trace Mesh Gaming PC Tower (Model TMI7N4601)
- iBUYPOWER Chimera KM1 RGB Gaming Keyboard
- iBUYPOWER RGB Gaming Mouse
- Power Cable
- Quick Start Guide
- Accessory bag (containing screws, cables, and other small parts)

Figure 2: The included iBUYPOWER RGB gaming keyboard and mouse.
3. Setup Instructions
Follow these steps for the initial setup of your iBUYPOWER Trace Mesh Gaming PC:
- Unpacking the PC: Carefully remove the PC tower from its packaging. It is recommended to have two people for this step due to the weight and size of the unit. Remove all external protective films and internal packaging materials, including any foam inserts inside the PC case.
- Connecting the Monitor: Connect your monitor to the graphics card ports located at the rear of the PC. Use an HDMI or DisplayPort cable. Ensure the cable is securely fastened.
- Connecting Peripherals:
- Connect the included iBUYPOWER gaming keyboard and mouse to the available USB ports on the PC.
- If using external speakers or a headset, connect them to the audio jacks (headphone and microphone) located on the top of the PC tower.
- Power Connection: Connect the power cable to the power supply unit (PSU) at the rear of the PC, then plug the other end into a grounded electrical outlet.
- Initial Power On: Press the power button located on the top of the PC tower. The system will boot up, and you will be guided through the Windows 11 Home Advanced setup process.

Figure 3: Top I/O ports including USB, USB-C, headphone, and microphone jacks.

Figure 4: Internal view of the PC showing components and protective packaging.
4. Operating Instructions
Your iBUYPOWER Trace Mesh Gaming PC is designed for high performance and ease of use. Here are some general operating guidelines:
- Power On/Off: Use the power button on the top panel to turn the PC on or off. For proper shutdown, always use the Windows shutdown option.
- RGB Lighting: The PC features customizable RGB lighting for internal fans and the included peripherals. Refer to the iBUYPOWER software (pre-installed or downloadable from the official website) for customization options.
- Connectivity: Utilize the various ports for connecting external devices. The PC includes 6 x USB 3.1 ports, 1x RJ-45 Network Ethernet 10/100/1000, and on-board audio.
- Wi-Fi Connectivity: The PC is Wi-Fi Ready. Connect to your wireless network through Windows settings.

Figure 5: The PC tower illuminated with blue RGB lighting.
5. Maintenance
Regular maintenance helps preserve your PC's performance and lifespan:
- Dust Management: Periodically clean dust from the PC's vents and internal components using compressed air. The mesh front panel is designed for optimal airflow, but dust can still accumulate.
- Software Updates: Keep your operating system, drivers (especially graphics drivers), and security software updated to ensure stability and performance.
- Cable Management: Ensure internal and external cables are neatly organized to prevent airflow obstruction and accidental disconnections.

Figure 6: The mesh front panel designed for optimal airflow.
6. Troubleshooting
If you encounter issues with your PC, consider the following common solutions:
- PC Not Powering On: Ensure the power cable is securely connected to both the PC and the wall outlet. Check the power switch on the PSU at the back of the PC.
- No Display on Monitor: Verify that the monitor cable is connected to the graphics card ports (not the motherboard ports) and that the monitor is powered on and set to the correct input source.
- System Boots to BIOS: If the system consistently boots to the BIOS, check that the RAM modules are properly seated in their slots. Reseat them if necessary.
- Peripherals Not Responding: Try connecting the keyboard or mouse to different USB ports. Ensure drivers are installed if required (though most are plug-and-play).
- Performance Issues: Close unnecessary background applications. Ensure your drivers are up to date. Check for adequate ventilation and dust buildup.
7. Specifications
Key technical specifications for the iBUYPOWER Trace Mesh Gaming PC Desktop Computer TMI7N4601:
| Component | Specification |
|---|---|
| Processor | Intel Core i7 14700F (2.1 GHz) |
| Graphics Card | NVIDIA GeForce RTX 4060 8GB |
| RAM | 32GB DDR5 5600MHz (16x2) |
| Storage | 2TB NVMe SSD |
| Operating System | Windows 11 Home Advanced |
| Connectivity | 6 x USB 3.1, 1x RJ-45 Ethernet, On-board Audio, 802.11AC Wi-Fi |
| Dimensions (LxWxH) | 18.9 x 8.66 x 19.3 inches |
| Weight | 30 pounds |
8. Warranty and Support
For warranty information, please refer to the documentation included with your product or visit the official iBUYPOWER website. For technical assistance, contact iBUYPOWER customer support during their operating hours:
- Customer Service Hours: Mon - Fri: 8:30AM - 5:00PM PST
- Technical Support Hours: Mon - Fri: 8:30AM - 5:00PM PST
- Toll Free Support: 1 (888) 618-6040
You can also visit the iBUYPOWER Support Page for additional resources and FAQs.