Introduction
Thank you for choosing the Haunted Hill Farm Lifesize Animatronic Scary Reaper with Wings. This animated decoration is designed to enhance your indoor or covered outdoor Halloween display with its touch-activated lights, sound, and movement. Please read this manual thoroughly before assembly and operation to ensure safe and proper use.
Safety Information
- This product is intended for decorative purposes only. It is not a toy. Keep out of reach of children and pets.
- Use only the specified battery type (3 AA batteries, not included). Do not mix old and new batteries, or different types of batteries.
- Ensure batteries are inserted with correct polarity (+/-). Remove batteries if the product is not used for an extended period.
- Do not expose the product to direct rain, snow, or extreme weather conditions. It is suitable for indoor or covered outdoor use only.
- Keep away from open flames, heat sources, and flammable materials.
- Do not attempt to modify or repair the product. Refer to the manufacturer for service.
- Position the animatronic on a stable, level surface to prevent tipping. Use the included U-shaped stakes for added stability if placed outdoors in a covered area.
Package Contents
Please verify that all components are present before beginning assembly:
- 1x Animatronic Reaper Body (with attached wings and clothing)
- 1x Sturdy Metal Stand
- U-shaped Stakes (for securing the base)
Assembly Instructions
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble the Stand: Connect the metal stand components as indicated by the arrows or notches. Ensure all connections are secure.
- Attach Reaper to Stand: Place the animatronic reaper onto the assembled stand. The reaper features an easy two-piece assembly. Ensure the reaper is firmly seated on the stand.
- Insert Batteries: Locate the battery compartment, typically on the back or base of the animatronic. Insert 3 AA batteries (not included), observing the correct polarity. Close the battery compartment securely.
- Secure with Stakes (Optional for Covered Outdoor Use): If placing the animatronic in a covered outdoor area, use the provided U-shaped stakes to secure the base of the stand to the ground for enhanced stability.
Figure 1: Easy two-piece assembly and U-shaped stakes for support.
Figure 2: The reaper features poseable arms for custom display.
Operating Instructions
The Haunted Hill Farm Animatronic Reaper is designed for simple, interactive operation.
- Power On: Locate the ON/OFF switch, usually near the battery compartment. Switch it to the "ON" position.
- Activation: The animatronic is touch-activated. A touch or bump will trigger its sequence.
- Animated Sequence: Upon activation, the reaper's arms and head will swing back and forth. Its eyes will glow with red LED lights, and it will emit menacing roars and creepy laughter.
Figure 3: The animatronic is touch-activated.
Figure 4: The reaper's eyes light up and flash red.
Figure 5: Key features: lights, sound, and battery operation.
Video 1: Demonstration of the Haunted Hill Farm Reaper Animatronic's movements, lights, and sounds.
Maintenance
- Cleaning: Wipe the animatronic clean with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Battery Replacement: When the lights dim or sounds become distorted, replace the 3 AA batteries. Always replace all batteries at once.
- Storage: When not in use, store the animatronic in its original packaging or a protective container in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries before storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Animatronic does not activate. | ON/OFF switch is in 'OFF' position. Batteries are dead or incorrectly inserted. Sensor is obstructed. | Ensure switch is 'ON'. Replace batteries, checking polarity. Clear any obstructions from the touch sensor area. |
| Lights are dim or sound is distorted. | Low battery power. | Replace all 3 AA batteries with new ones. |
| Movement is erratic or non-existent. | Obstruction in moving parts. Low battery power. | Check for any objects hindering arm or head movement. Replace batteries. |
Specifications
- Model Number: HHWINGSKEL-4FLSA
- Dimensions (Approximate): 23.6"D x 7"W x 66.1"H
- Item Weight: 3.24 Pounds
- Material: Fabric, Plastic
- Power Source: 3 AA Batteries (not included)
- Recommended Use: Indoor or Covered Outdoor Decoration
- Assembly Required: Yes
Figure 6: Product dimensions.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Haunted Hill Farm customer service directly. Keep your purchase receipt for proof of purchase.