Bazargame 58CC Gas Powered Chainsaw User Manual

1. Introduction

This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your Bazargame 58CC Gas Powered Chainsaw. Please read this manual thoroughly before operating the chainsaw to ensure proper use and to prevent injury or damage.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or death.

• Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, gloves, and sturdy footwear when operating the chainsaw.
• Before use, ensure the fuel oil mixing bottle contains the correct mixture of gasoline and two-stroke engine oil (1 part engine oil to 25 parts gasoline).
• Never place hands on the guide plate chain when the machine is running to avoid injury.
• Familiarize yourself with the flame out switch and throttle lock button for emergency stops.
• Read the entire user manual and product labels carefully before operation.
• Operate the chainsaw only in well-ventilated areas.
• Keep bystanders, especially children and pets, at a safe distance from the work area.

3. Package Contents

Verify that all items are present in the package:

• 1x Gasoline Chainsaw
• 1x Chain
• 1x Guide Bar
• 1x Guide Bar Cover
• 1x Fuel Oil Mixing Bottle
• 1x English Manual (this document)
• Other Accessories for Assembly

4. Assembly Instructions

Follow these steps to assemble your chainsaw:

1. Install the Guide Bar: Carefully attach the guide bar to the chainsaw body. Ensure it is seated correctly.
   

   Image: The chainsaw body with the guide bar and chain components ready for assembly.

2. Install the Chain: Place the chain around the guide bar, ensuring the cutting teeth are facing the correct direction.
3. Align and Install the Side Cover: Align the holes of the side cover with the chainsaw body and secure it with the provided nuts. Do not fully tighten yet.
4. Adjust Chain Tightness: Use the chain tensioning screw to adjust the chain tightness. The chain should be snug but still able to be pulled freely by hand. Refer to the specific tensioning mechanism on your model.
5. Sleeve Lock Nut: Once the chain tension is correct, fully tighten the side cover nuts to secure the guide bar and chain.
6. Installation Complete: Your chainsaw is now assembled. Double-check all connections before proceeding.
   

   Image: A fully assembled Bazargame 58CC Gas Powered Chainsaw, ready for operation.

5. Operating Instructions

5.1 Fuel Mixture

The chainsaw requires a specific fuel mixture. Use the provided fuel oil mixing bottle to prepare the mixture:

• Fuel Ratio: 1 part two-stroke engine oil to 25 parts gasoline (1:25).
• Mix thoroughly before adding to the chainsaw's fuel tank.
• The fuel tank capacity is 550ml (0.15 Gallons).
• The lubricating oil capacity is 260ml (0.07 Gallons).

5.2 Starting the Chainsaw

Refer to the specific starting procedure outlined in your manual. Generally, this involves:

1. Ensure the chainsaw is on a stable, flat surface.
2. Engage the chain brake.
3. Set the choke (if applicable).
4. Press the primer bulb several times until fuel is visible.
5. Pull the starter cord firmly until the engine attempts to start.
6. Disengage the choke (if applicable) and pull the starter cord again until the engine starts.
7. Allow the engine to warm up for a few moments before use.

5.3 Operation

The chainsaw is designed for cutting wood. Always maintain a firm grip with both hands and ensure stable footing. The chainsaw can only be activated by pressing both the safety switch and the throttle switch simultaneously.

Image: A person demonstrating the proper two-handed grip while operating the chainsaw to cut a log.

Image: The chainsaw actively cutting through a thick tree branch, showing sawdust expulsion.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your chainsaw.

• Chain Lubrication: The chainsaw features an automatic lubrication system for the guide bar and chain. Ensure the lubricating oil reservoir is filled before each use.
• Air Filter: Regularly inspect and clean the air filter to prevent airborne impurities and dust from entering the engine. A clean air filter improves engine performance.
• Cooling System: The air-cooling system and cooling holes help dissipate heat. Keep these areas clear of debris.
• Chain Sharpening: A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain regularly or replace it when necessary.
• General Cleaning: After each use, clean the chainsaw thoroughly, removing sawdust, debris, and oil residue.

7. Troubleshooting

This section addresses common issues you might encounter with your chainsaw.

• Engine Fails to Start:
  • Check fuel mixture and level.
  • Ensure the spark plug is clean and properly connected.
  • Verify the choke setting and starting procedure.
  • Check for a clogged fuel filter or air filter.
• Loss of Power / Poor Performance:
  • Inspect the air filter for clogging.
  • Check chain sharpness and tension.
  • Ensure correct fuel mixture.
  • Clean the spark plug.
• Chain Not Lubricating:
  • Check the lubricating oil reservoir level.
  • Inspect the oil pump and oil passages for blockages.

For issues not covered here, please contact customer support.

8. Specifications

Image: A diagram illustrating the key dimensions of the Bazargame 58CC Gas Powered Chainsaw.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact Bazargame customer service. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the Bazargame Store on Amazon.