Introduction
Thank you for choosing the Phneems Automatic Foaming Soap Dispenser. This manual provides essential information for the safe and efficient use of your new device. Please read it thoroughly before operation and retain it for future reference.
Image: The Phneems Automatic Foaming Soap Dispenser in black acrylic, dispensing rich foam into a hand.
Safety Information
- Do not immerse the dispenser in water or any other liquid.
- Keep the device away from direct sunlight and heat sources.
- Use only foaming soap or diluted liquid soap as specified. Undiluted gel soap may cause clogging.
- This product is for indoor use only.
- Keep out of reach of children unless supervised.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
Package Contents
- 1 x Phneems Automatic Foaming Soap Dispenser (Model QP003)
- 1 x USB-C Charging Cable
- 1 x User Manual
Product Overview
The Phneems Automatic Foaming Soap Dispenser features a modern ribbed design with a transparent acrylic body and a matte black pump. It is designed for touchless operation, providing convenience and hygiene.
Image: The Phneems Automatic Foaming Soap Dispenser showing its dimensions (16cm/6.29in height, 7.0cm/2.75in diameter) and the location of the one-touch power button.
Key Components:
- Sensor Nozzle: Detects hand movement for automatic dispensing.
- Power Button: Located on top for turning the device on/off.
- Soap Reservoir: Transparent acrylic body to hold soap.
- USB-C Charging Port: For recharging the internal battery.
Setup
1. Initial Charging
Before first use, fully charge the dispenser. Connect the provided USB-C cable to the charging port on the dispenser and to a compatible USB power adapter (not included). A full charge typically takes 3-4 hours and provides over 100 days of operation (based on 10+ uses/day).
Image: Acceptable USB-C charging methods (wall adapter, multi-port charger, wall outlet with USB-C) and an unacceptable DC charger.
2. Filling the Dispenser
The dispenser has a 260ml (9oz) capacity. It is designed for foaming soap. If using liquid gel soap, it must be diluted to create foam.
- Remove the top pump assembly by twisting it counter-clockwise and lifting it off.
- Pour foaming soap directly into the reservoir.
- If using liquid gel soap, mix it with water in the following ratio:
- Recommended Mixture Ratio: 10%-30% Gel/Liquid Soap, 70%-90% Water.
- Carefully replace the pump assembly, ensuring it is securely twisted clockwise.
Image: The Phneems dispenser with its top removed, showing the wide opening for easy filling of soap.
Image: A visual guide for mixing liquid gel soap with water to achieve the correct foaming consistency.
Operation
1. Power On/Off
Press the power button located on the top of the dispenser once to turn it on. Press it again to turn it off.
2. Dispensing Foam
Once powered on, place your hand under the sensor nozzle. The dispenser will automatically release foam within 0.25 seconds. For a larger volume of foam, wave your hand under the sensor twice.
Image: The Phneems dispenser being used in different settings, including handwashing, dishwashing, and facial cleansing.
Maintenance
- Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Refilling: Refill the soap reservoir as needed, following the instructions in the "Filling the Dispenser" section.
- Long-term Storage: If not using the dispenser for an extended period, empty the soap reservoir, clean the unit, and ensure it is fully charged before storing in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser does not turn on. | Low battery or no charge. | Charge the dispenser fully using the provided USB-C cable. |
| No foam dispensed. |
|
|
| Foam is weak or inconsistent. | Incorrect soap dilution or type. | Adjust the soap-to-water ratio for liquid gel soap. Ensure you are using foaming soap or properly diluted gel soap. |
| Dispenser leaks. | Pump assembly not securely attached. | Ensure the pump assembly is twisted clockwise and securely fastened to the reservoir. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | QP003 |
| Material | Plastic (Acrylic) |
| Dimensions (L x W x H) | 2.75" x 2.75" x 6.29" (7cm x 7cm x 16cm) |
| Liquid Volume Capacity | 260 ml (9 oz) |
| Charging Port | USB-C |
| Battery Life | 100+ days on a single charge (approx. 10+ uses/day) |
| Dispensing Speed | 0.25 seconds |
| UPC | 639394509273 |
Warranty and Support
This Phneems Automatic Foaming Soap Dispenser comes with a 1-year warranty from the date of purchase. If you encounter any issues or have questions regarding your product, please contact Phneems customer support directly through your Amazon order page. Provide your order number for faster service.
For more information or to contact support, visit the Phneems Store on Amazon.