Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Aituzero Tranquil Ease 11560UX 5 Pin Lift Chair Remote. This remote is designed for compatibility with various lift chairs and power recliners that utilize a 5-pin connector.
The 11560UX remote features an extended 7.1-foot cable and a weak blue light design for improved visibility in low-light conditions and reduced eye strain. It serves as a direct replacement for models such as 11560, 11560U, HC-6601-FR2, HC-6022-PR2-TE/PAL, and HC-UR1B-01.
Product Overview
Image: The Aituzero Tranquil Ease 11560UX 5 Pin Lift Chair Remote, showing its ergonomic design and 5-pin connector.
The Aituzero Tranquil Ease 11560UX remote is a durable and user-friendly control unit for your lift chair. It features two large, responsive buttons for controlling the chair's movement, and a weak blue backlight for easy use in dim environments. The extended cable provides flexibility in placement.
Compatibility
This remote is widely compatible with various lift chairs and power recliners. It is designed to work with any electric recliner motor that has a 5-pin connector with lips.
Compatible Brands Include: Best Home Furnishings, Inseat, Lazy Boy, Ultra Comfort, Palliser, Golden, Limoss, Pride, Med, Okin, Catnapper, and many others.
Replaces Remote Models: 11560, 11560U, HC-6601-FR2, HC-6022-PR2-TE/PAL, HC-UR1B-01, and similar 5-pin lift chair hand controls.
Image: Visual representation of the remote's wide compatibility with different lift chair brands and models.
Important Note: Your electric recliner motor must have a 5-pin plug for this remote to be compatible. Please verify your chair's connector type before installation.
Setup and Installation
Installation of the Aituzero Tranquil Ease 11560UX remote is designed to be quick and straightforward, typically taking about 10 minutes.
- Locate the Existing Remote Connection: Identify the current remote control cable connected to your lift chair's motor. This is usually a round 5-pin connector.
- Disconnect the Old Remote: Carefully unplug the existing remote control from the motor. Ensure the power to the lift chair is disconnected before proceeding.
- Connect the New Remote: Take the new Aituzero 11560UX remote. Its round 5-pin, 90-degree connector is designed to plug directly into Deltadrive, Betadrive, or Okidrive motors. Align the pins and gently push the connector into the motor's port until it is secure.
- Secure the Cable: Route the 7.1-foot cable in a way that prevents entanglement or damage, allowing for comfortable placement of the remote.
- Test Functionality: Reconnect power to your lift chair and test all functions of the new remote to ensure proper operation.
Image: Illustration demonstrating the connection of the 5-pin remote to a lift chair motor, highlighting the extended cable and weak blue light feature.
Operating Instructions
The Aituzero 11560UX remote features a simple two-button interface for controlling your lift chair's movements.
- Up Button: Press and hold the UP button to raise the lift chair or recline the backrest. Release the button to stop movement.
- Down Button: Press and hold the DOWN button to lower the lift chair or bring the backrest to an upright position. Release the button to stop movement.
The weak blue light design illuminates the buttons, making them easy to locate and operate even in dimly lit rooms, reducing eye fatigue.
Image: The Aituzero 11560UX 5 Pin Hand Control placed on a lift chair, illustrating its ease of use and integrated design.
Maintenance and Care
Proper care will ensure the longevity and reliable performance of your remote control.
- Cleaning: Wipe the remote with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the electronic components.
- Cable Management: Be cautious when handling the remote's cable to prevent kinks, cuts, or entanglement. Do not pull the cable forcefully to disconnect the remote.
- Storage: When not in use, place the remote in a safe location where it will not be dropped or subjected to heavy objects. The extended cable allows for flexible placement on or near the chair.
- Environmental Conditions: Avoid exposing the remote to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
Safety Precaution: Always ensure the remote is used with a compatible lift chair. Do not attempt to use the remote with any other electrical device. Always follow the manufacturer's instructions for safe use and operation of the lift chair.
Troubleshooting
If you encounter issues with your Aituzero 11560UX remote, please refer to the following common troubleshooting steps:
- Remote Not Responding:
- Check if the 5-pin connector is securely plugged into the lift chair motor. A loose connection can prevent operation.
- Ensure the lift chair itself is powered on and connected to a working electrical outlet.
- Verify that the remote's cable is not damaged (e.g., cut, pinched).
- Buttons Not Working:
- Confirm that the remote is indeed the correct replacement for your lift chair model and that it uses a 5-pin connector.
- If only one button is unresponsive, there might be an internal issue.
- Weak Blue Light Not Illuminating:
- This feature is integrated. If the remote functions but the light does not, it may indicate a minor electrical issue with the LED.
If these steps do not resolve the issue, please contact customer support for further assistance.
Specifications
| Model Name | Tranquil Ease 11560UX 5 Pin Lift Chair Remote |
| Brand | Aituzero |
| Connector Type | 5-Pin, Round, 90-degree |
| Cable Length | 7.1 feet (approximately 2.16 meters) |
| Special Features | Weak Blue Light Design, Extended Cable |
| Material | Plastic |
| Product Dimensions | 2.44"D x 4.84"W x 5.28"H (Remote body, approximate) |
| Item Weight | 7.8 ounces |
Warranty and Support
Aituzero is committed to providing excellent customer service and stands behind the quality of its products.
- Three-Year Free Replacement: This product comes with a three-year free replacement policy. If you encounter any issues within this period, you may apply for an unconditional free replacement.
- Customer Support: For any questions, concerns, or assistance with your product, please contact Aituzero customer service. You can typically find contact information on the product packaging or the seller's platform. Expect a satisfactory response within 12 hours.