Z-Lite 1948F20-MB Harden Flush Mount Instruction Manual

Introduction and Safety Information

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 1948F20-MB Harden Flush Mount light fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the main circuit breaker or fuse box before installation or any maintenance. Consult a qualified electrician if you are unsure about wiring procedures.

All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
Use only the specified bulb type and wattage. Exceeding the maximum wattage may cause overheating and damage to the fixture or create a fire hazard.
Do not install this fixture in wet or damp locations.
Handle glass components with care to prevent breakage.

Z-Lite 1948F20-MB Harden Flush Mount light fixture, matte black finish with decorative metal overlay and white diffuser

Figure 1: Z-Lite 1948F20-MB Harden Flush Mount Fixture

This image displays the Z-Lite 1948F20-MB Harden Flush Mount light fixture. It features a matte black finish with an intricate, decorative metal overlay surrounding a white, cylindrical diffuser. The fixture is designed for ceiling installation.

Package Contents

Carefully unpack the fixture and check that all parts are included. Keep all packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

Fixture Body (A)
Mounting Plate / Crossbar (B)
Mounting Screws (C)
Wire Nuts (D)
Decorative Nuts / Finials (E)
Glass Diffuser / Shade (F)
Instruction Manual (G)
Bulbs are not included and must be purchased separately.

Setup and Installation

Tools Required (Not Included):

Phillips Head Screwdriver
Flat Head Screwdriver
Wire Strippers
Electrical Tape
Safety Glasses
Ladder

Installation Steps:

Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely. Verify power is off using a voltage tester.
Prepare Mounting Plate: Attach the mounting plate (B) to the junction box in the ceiling using the mounting screws (C) provided. Ensure the plate is securely fastened.
Wiring Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut (D).
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut (D).
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting plate) using a wire nut (D).
- Carefully tuck all wires into the junction box.
Attach Fixture Body: Align the fixture body (A) with the mounting plate (B) and secure it using the decorative nuts (E) or screws provided, ensuring a snug fit against the ceiling.
Install Bulbs: Insert five (5) incandescent bulbs into the sockets. Do not exceed the maximum wattage of 60 watts per bulb.
Install Diffuser: Carefully place the glass diffuser/shade (F) into the fixture body, securing it according to the fixture's design (e.g., twisting into place, using clips, or securing with additional decorative elements).
Restore Power: Once installation is complete and all components are secure, turn the power back on at the circuit breaker.

Operating Instructions

The Z-Lite 1948F20-MB Harden Flush Mount fixture operates using a standard wall switch. Once installed and powered, simply toggle the wall switch to turn the light on or off.

Maintenance

Cleaning:

Always turn off power to the fixture before cleaning.
Wipe the fixture with a soft, dry cloth.
Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
For glass components, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.

Bulb Replacement:

Turn off power to the fixture at the circuit breaker.
Allow bulbs to cool completely before touching.
Carefully remove the glass diffuser/shade.
Unscrew the old bulb and replace it with a new incandescent bulb of the same type and wattage (max 60W).
Reattach the diffuser/shade and restore power.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power to the fixture. Loose wiring connection. Faulty bulb. Faulty wall switch.	Check circuit breaker/fuse. Verify all wire connections are secure (power off first). Replace bulb. Test wall switch or consult an electrician.
Light flickers.	Loose bulb. Loose wiring connection. Incorrect bulb type/wattage.	Tighten bulb. Check all wire connections (power off first). Ensure correct bulb type and wattage are used.
Fixture hums.	Loose components. Incompatible dimmer switch (if applicable).	Ensure all parts are securely fastened. If using a dimmer, ensure it is compatible with incandescent fixtures.

Specifications

Brand:	Z-Lite
Model Number:	1948F20-MB
Product Dimensions:	20.25 x 20.25 x 8.25 inches (Length x Width x Height)
Item Weight:	14 pounds
Number of Lights:	5
Maximum Wattage:	60 Watts per bulb (300 Watts total)
Voltage:	120 Volts
Lamp Type:	Incandescent
Material:	Steel
Finish:	Matte Black
Style:	Modern
Collection:	Harden

Warranty and Support

For warranty information or technical support regarding your Z-Lite 1948F20-MB Harden Flush Mount fixture, please contact Z-Lite customer service directly. Refer to the original purchase documentation or the Z-Lite official website for contact details.

Z-Lite Official Website: www.z-lite.com

Please have your model number (1948F20-MB) and date of purchase available when contacting support.