Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Generic BLW-BT940GD Flex Around-the-Neck Wireless Earbuds. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figure 1: Generic BLW-BT940GD Flex Around-the-Neck Wireless Earbuds. These earbuds feature a flexible neckband design with gold accents and in-ear buds.
Package Contents
- Generic BLW-BT940GD Flex Around-the-Neck Wireless Earbuds
- Ear Cushions (various sizes)
- USB Charging Cable
- User Manual (this document)
Setup
1. Charging the Earbuds
Before first use, fully charge the earbuds. Connect the provided USB charging cable to the charging port on the neckband and plug the other end into a USB power source (e.g., computer, wall adapter). The LED indicator will show charging status and turn off or change color when fully charged.
2. Powering On/Off
- Power On: Press and hold the Power button (usually located on the neckband) for approximately 3-5 seconds until the LED indicator flashes.
- Power Off: Press and hold the Power button for approximately 3-5 seconds until the LED indicator turns off.
3. Bluetooth Pairing
- Ensure the earbuds are powered off.
- Press and hold the Power button for 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "BLW-BT940GD" from the list of found devices.
- Once paired, the LED indicator will flash blue slowly, and you may hear an audible confirmation.
Note: The earbuds will automatically attempt to reconnect to the last paired device when powered on.
Operating Instructions
Controls
The control buttons are typically located on one side of the neckband. Refer to the diagram below for button identification (assuming standard layout).
Figure 2: Control buttons on the left side of the neckband. From top to bottom: Volume Up/Next Track, Multi-function Button (Power/Play/Pause/Call), Volume Down/Previous Track.
| Button/Action | Function |
|---|---|
| Power Button (Multi-function) |
|
| Volume Up (+) |
|
| Volume Down (-) |
|
Making and Receiving Calls
The built-in microphone allows for hands-free calling when connected to your smartphone.
- Answer Call: Press the Multi-function button once.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
- Redial: Double-press the Multi-function button to redial the last number.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the earbuds and neckband. Do not use harsh chemicals or abrasive materials.
- Storage: Store the earbuds in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the earbuds frequently. Charge them regularly, even if not in use for extended periods.
- Ear Cushions: Periodically remove and clean the ear cushions with a damp cloth. Ensure they are completely dry before reattaching.
Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds won't turn on. | Ensure the earbuds are fully charged. Connect to a power source and allow sufficient charging time. |
| Cannot pair with device. |
|
| No sound or low volume. |
|
| Poor sound quality or disconnections. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | BLW-BT940GD |
| Brand | Generic |
| Connectivity Technology | Wireless (Bluetooth V5.0) |
| Driver Unit | 10mm Dynamic Driver |
| Impedance | 32 Ohms |
| Frequency Range | 20Hz - 20KHz |
| Rated Power | 150mW |
| Battery Life | Up to 14 Hours Playtime |
| Microphone | Built-in |
| Design | Flexible Around-the-Neck |
| Color | Gold |
| Material | Flexible Material |
| Dimensions (Package) | 5.51 x 5.31 x 1.75 inches |
| Item Weight | 5.6 ounces (0.35 Pounds) |
| Compatible Devices | Smartphones, Tablets, Laptops, Desktops, Smart TVs, Smart Speakers |
Product Video
Video: An overview of the Sentry BLW-BT940GD Wireless Earbuds, highlighting key features such as 14-hour playtime, Bluetooth 5.0 connectivity, built-in microphone, 10mm driver units, 32 Ohms impedance, and flexible around-the-neck design with a gold finish. The video provides a visual demonstration of the product's design and features.
Warranty Information
This product is covered by a standard manufacturer's warranty. Please refer to the packaging or contact the retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
Support
For technical support, troubleshooting assistance, or further inquiries, please contact the retailer or manufacturer directly. Refer to the product packaging for contact details.
