Nisanmoon X01 HD 1080P Hidden Camera Photo Frame User Manual

1. Introduction

Thank you for choosing the Nisanmoon X01 HD 1080P Hidden Camera Photo Frame. This device combines a functional photo frame with a discreet high-definition camera, offering both decoration and surveillance capabilities. It supports video recording with motion detection and continuous loop recording, making it suitable for home or office security monitoring.

Package Contents:

• Nisanmoon X01 Hidden Camera Photo Frame
• USB Charging Cable
• User Manual

2. Safety Information

• Do not expose the device to extreme temperatures, humidity, or direct sunlight.
• Avoid dropping or subjecting the device to strong impacts.
• Keep the device away from water and other liquids.
• Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage.
• Use only the provided USB cable for charging.
• Ensure the device is used in compliance with local laws and regulations regarding surveillance.

3. Product Overview

The Nisanmoon X01 is designed to blend seamlessly into your environment. Below is an illustration of the device and its key components.

Figure 1: Nisanmoon X01 Hidden Camera Photo Frame. This image shows the black photo frame with a family picture inserted. The top left corner of the frame discreetly houses the camera lens, indicated by a magnified view and concentric circles. On the right side of the frame, small icons represent features like HD recording, loop recording, motion detection, and no Wi-Fi connectivity.

Component Identification:

• Camera Lens: Discreetly located on the frame.
• Photo Slot: For inserting a 4x6 inch (10x15 cm) photo.
• Micro SD Card Slot: For storage (supports up to 128GB, card not included).
• USB Port: For charging and data transfer.
• Power Button/Mode Switch: Controls power and recording modes.
• Indicator Light: Displays device status (charging, recording, etc.).

4. Setup

4.1 Charging the Device

1. Connect the small end of the USB charging cable to the USB port on the photo frame.
2. Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The indicator light will illuminate during charging and turn off when fully charged.
4. A full charge typically takes approximately 2-3 hours.

4.2 Inserting a Micro SD Card

A Micro SD card (not included) is required for recording video. The device supports cards up to 128GB.

1. Locate the Micro SD card slot on the device.
2. Gently insert the Micro SD card into the slot with the gold contacts facing down until it clicks into place.
3. To remove the card, push it in slightly until it clicks, then release, and it will eject.
4. It is recommended to format the Micro SD card before first use and periodically to ensure optimal performance. This can be done by connecting the device to a computer.

5. Operating Instructions

The Nisanmoon X01 offers two primary recording modes: continuous loop recording and motion detection recording.

5.1 Powering On/Off

• To Power On: Press and hold the Power button for approximately 3 seconds until the indicator light illuminates.
• To Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

5.2 Selecting Recording Mode

The device features a mode switch to select between loop recording and motion detection recording.

• Loop Recording Mode: Slide the mode switch to the designated position for continuous recording. When the Micro SD card is full, the oldest files will be overwritten by new recordings.
• Motion Detection Mode: Slide the mode switch to the designated position for motion-activated recording. The camera will begin recording only when motion is detected within its field of view, saving storage space and battery life.

5.3 Recording Video

1. Ensure a formatted Micro SD card is inserted and the device is sufficiently charged.
2. Power on the device.
3. Select your desired recording mode using the mode switch.
4. The indicator light will change to confirm recording has started (refer to the device's specific light patterns for details).
5. To stop recording, power off the device.

6. Playback and Data Transfer

To view recorded videos, connect the device to a computer.

1. Ensure the device is powered off.
2. Connect the device to your computer using the USB cable.
3. The computer will recognize the device as a removable disk.
4. Open the removable disk to access the recorded video files.
5. Copy the files to your computer for playback or storage.
6. Safely eject the removable disk from your computer before disconnecting the USB cable.

7. Maintenance

• Clean the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Keep the camera lens clean for optimal video quality.
• Store the device in a cool, dry place when not in use.
• Charge the battery periodically if the device is stored for extended periods to maintain battery health.

8. Troubleshooting

• Device not turning on: Ensure the battery is charged. If the issue persists, try resetting the device (if a reset button is available, otherwise power cycle).
• Cannot record: Check if a Micro SD card is inserted and properly formatted. Ensure the card is not full.
• Poor video quality: Clean the camera lens. Ensure adequate lighting in the recording environment.
• Device not recognized by computer: Try a different USB port or cable. Ensure the device is powered off before connecting.
• If the device is not functioning correctly: Try resetting the camera or formatting the SD card.

9. Specifications

10. Warranty and Support

Nisanmoon products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Nisanmoon website. Please retain your proof of purchase for warranty claims.