1. Introduction
Thank you for choosing the COSTWAY 24.5 Inch Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
These saddle stools are designed to enhance your kitchen island, dining room, living area, or home bar with their industrial charm and durable construction. Crafted from natural acacia wood for the seat and legs, and rubber wood for the footrests, they offer both style and stability.
2. Safety Information
Important Safety Warnings:
- Exceeding the recommended weight limit of 350 lbs (160 kg) may result in damage to the stool or potential injury.
- Use of this stool on slippery surfaces without non-slip foot pads may pose a risk of the stool sliding. Ensure all non-slip foot pads are securely attached before use.
- Always ensure all screws and bolts are tightened securely before sitting on the stool. Periodically check and re-tighten fasteners as needed.
- Do not stand on the stools.
- Keep children away from the assembly area. Small parts can be a choking hazard.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer service.
- 4 x Bar Stools (disassembled)
- 1 x Instruction Manual
- Hardware Pack (screws, bolts, Allen wrench, non-slip foot pads)
4. Specifications
| Product Dimensions (L x W x H) | 17" x 13" x 24.5" (42.5 x 33 x 62 cm) |
| Seat Size (L x W) | 15.5" x 10" (39 x 25.5 cm) |
| Suitable Table Height | 35"-39" (89-99 cm) |
| Weight Capacity (Each Stool) | 350 lbs / 160 kg |
| Total Net Weight (Set of 4) | 17.5 lbs / 8 kg |
| Color | Grey + Walnut |
| Material | Rubber Wood, Acacia Wood |
| Model Number | JV11682WH |
Figure 1: Product Dimensions. The stool measures 24.5 inches in height, 17 inches in width, and 13 inches in depth. The seat is 15.5 inches long and 10 inches wide.
5. Assembly Instructions
Assembly is required for these bar stools. Please follow the steps below carefully. It is recommended to assemble the stools on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out and compare them with the parts list in your hardware pack to ensure everything is present.
- Assemble Leg Frames: Each leg and cross piece is a separate component. Attach the horizontal cross pieces to the vertical leg pieces using the provided screws and Allen wrench. Ensure the holes align correctly. Do not fully tighten screws at this stage.
- Attach Footrests: Secure the rubber wood footrests to the assembled leg frames. The footrests are designed to provide support and relaxation for your legs. Ensure they are oriented correctly. Again, do not fully tighten all screws yet.
- Secure Seat to Frame: Place the acacia wood seat onto the top of the assembled leg frame. Align the pre-drilled holes in the seat with the holes in the top of the leg frame. Insert and hand-tighten the screws to attach the seat.
- Final Tightening: Once all parts are loosely assembled, place the stool on a flat surface. Apply gentle downward pressure to ensure all parts are seated correctly, then systematically tighten all screws and bolts using the Allen wrench. Do not overtighten.
- Attach Non-slip Foot Pads: Peel and stick or press the non-slip foot pads onto the bottom of each leg to protect your flooring and enhance stability.
Repeat these steps for each bar stool in the set.
Figure 2: Well-Made Details. This image shows the reinforced structure beneath the seat for added stability and the non-slip foot pads at the base of the legs.
6. Operating and Usage
Your COSTWAY bar stools are designed for comfortable and versatile use in various settings.
- Seating Comfort: The ergonomic concave design of the seat is crafted to align with your body's natural posture, providing comfort during extended periods of sitting.
- Foot Support: Utilize the integrated rubber wood footrests to support and relax your legs and feet, enhancing your seating experience.
- Versatile Placement: These counter-height stools are suitable for use with kitchen islands, dining tables, home bars, or any counter-height surface within the recommended height range of 35"-39".
Figure 3: Ergonomic Curved Seat. The saddle-shaped seat is designed for optimal comfort and support.
Figure 4: Rubber Wood Footrests. The footrests provide a comfortable place to rest your feet while seated.
7. Maintenance
Proper care will ensure the longevity and appearance of your bar stools.
- Cleaning: Wipe the stools with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, which can damage the wood finish.
- Regular Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Avoid Moisture: Do not expose the stools to excessive moisture or direct sunlight for prolonged periods, as this can cause warping or fading of the wood.
8. Troubleshooting
If you encounter any issues with your COSTWAY bar stools, please refer to the following common solutions:
- Wobbling Stool: Ensure all screws and bolts are fully tightened. Check that the stool is placed on a flat, even surface. Adjust non-slip foot pads if necessary.
- Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are oriented correctly and that you are using the correct hardware for each step. Do not force parts together.
- Scratches on Floor: Verify that the non-slip foot pads are securely attached to all four legs. Replace worn pads if needed.
For persistent issues or further assistance, please contact COSTWAY customer support.
9. Warranty and Support
For detailed warranty information, product registration, or to contact customer support, please refer to the documentation included with your purchase or visit the official COSTWAY website. Our customer service team is available to assist you with any questions or concerns regarding your product.