Driveway Gate Vehicle Exit Wand Sensor User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the loosoo Driveway Gate Vehicle Exit Wand Sensor. This device is designed to automatically open a gate when a vehicle approaches, offering hands-free operation for various gate opener systems.

Image 1.1: The loosoo Driveway Gate Vehicle Exit Wand Sensor, showing the wand, 50-foot cable, and a small adjustment board. The background depicts a driveway gate and a car, illustrating its intended use.

2. Product Features

• Compatibility: Designed to be compatible with most gate opener brands, including Mighty Mule, Ghost Controls, and LiftMaster Vehicle Door Opening Systems.
• Adjustable Sensitivity: The sensitivity field of view can be adjusted from 2 feet to 12 feet using a dedicated button.
• Extended Cable: Includes a 50-foot direct burial cable (PVC jacketed 5-conductor cable) for flexible installation.
• Water Protection: Features a cable gland to prevent water ingress into the wand, enhancing durability.
• Vehicle Detection: Detects various vehicles such as cars, trucks, motorcycles, and ATVs. Larger vehicles or faster speeds may result in higher sensitivity.
• Easy Installation: Designed for straightforward installation along the driveway inside your property.

3. Package Contents

Verify that all components are present in the package:

• 1 x Exit Wand Sensor with 50ft (15m) Cable
• 1 x Range Adjustment Board

Image 3.1: Contents of the product package, showing the exit wand sensor with its coiled 50-foot cable, the separate range adjustment board, and an inset image detailing the five-core cable wires.

4. Compatibility

The loosoo Vehicle Exit Wand Sensor is designed for broad compatibility with various automatic gate opener systems. It automatically activates for hands-free gate operation when a vehicle is detected. Confirmed compatible brands include:

• Mighty Mule
• Ghost Controls
• LiftMaster Vehicle Door Opening Systems

It is capable of detecting various types of vehicles, including cars, trucks, motorcycles, and ATVs.

Image 4.1: Illustrates the sensor's compatibility with different gate types (swing and slide gates) and various vehicles (cars, trucks, motorcycles, ATVs).

5. Setup and Installation

The exit wand sensor is designed for easy installation along the driveway within your property. No wireless connection is required between the sensor and the gate opener receiver.

5.1 Placement Guidelines

• Bury the exit wand approximately 12 inches deep from the ground.
• Position the wand at a suitable distance from the gate, typically around 25 feet from the gate's full open position, to allow sufficient time for the gate to open.
• Ensure the cable from the wand remains approximately 5 feet from the ground when connecting to the control board.
• Use a PVC conduit for routing the cable to protect it from environmental factors and damage.

Image 5.1: An overhead diagram illustrating the recommended placement and burial depth for the exit wand sensor in a driveway, showing the sensor's magnetic field radius and cable routing to a control box.

Image 5.2: A cross-section diagram showing the vehicle sensor buried in a 10-12 inch deep pit, connected to a gate opener system.

5.2 Wiring the 5-Core Cable

The sensor uses a 5-core cable for connection to the gate opener's control board. Refer to the diagram below for proper wiring:

• RED: Input Voltage (+)
• GREEN: Ground/Common (-)
• BLACK: Relay's Common
• BLUE: Relay's Normally Open
• YELLOW: Range adjustment potentiometer (POT)

Image 5.3: A detailed wiring diagram showing the connection points on a typical gate opener control board and how the 5-core cable from the exit wand sensor and range adjustment board should be connected.

5.3 Adjusting Sensitivity

The sensitivity of the sensor can be adjusted using the provided range adjustment board. Turn the button on the board to set the detection range between 2 feet and 12 feet according to your preference and driveway layout.

6. Operating Instructions

Once installed and configured, the loosoo Vehicle Exit Wand Sensor operates automatically. When a vehicle approaches within its detection range (2 to 12 feet), the sensor's magnetic field detects the moving vehicle and triggers the connected gate opener system to open the gate.

• The sensor is designed to detect various vehicle types.
• The sensitivity of detection can be influenced by the size of the vehicle and its speed; larger vehicles or faster driving speeds may result in higher sensitivity.

Image 6.1: A car approaching a closed gate, with a visual representation of the magnetic field emanating from the buried exit wand sensor, indicating sensitive sensing and automatic gate opening.

7. Specifications

8. Troubleshooting

If the sensor is not functioning as expected, consider the following troubleshooting steps:

• No Detection:
  • Check all wiring connections to ensure they are secure and correctly matched according to the wiring diagram (Section 5.2).
  • Verify that the sensor is receiving the correct 12V DC power supply.
  • Adjust the sensitivity setting using the range adjustment board. Increase the range if vehicles are not being detected at the desired distance.
  • Ensure the sensor is buried at the recommended depth (approximately 12 inches) and not obstructed by large metallic objects that could interfere with its magnetic field.
• False Triggers:
  • Decrease the sensitivity setting using the range adjustment board.
  • Ensure there are no unintended metallic objects or moving parts within the sensor's detection range that could cause false activations.
• Intermittent Operation:
  • Inspect the cable for any signs of damage, especially if it was not routed through a protective conduit.
  • Check for loose connections at both the sensor and the control board.

9. Maintenance

The loosoo Vehicle Exit Wand Sensor is designed for minimal maintenance. However, periodic checks can help ensure its longevity and reliable operation:

• Cable Inspection: Periodically inspect the exposed portions of the cable for any signs of wear, cuts, or damage. If the cable is buried, ensure the conduit remains intact.
• Connection Check: Annually, check the connections at the gate opener control board to ensure they remain tight and free from corrosion.
• Environmental Factors: Ensure the area around the buried sensor remains clear of significant metallic debris or new installations that could interfere with its magnetic field.

10. Warranty and Support

loosoo is committed to providing excellent service and offers carefree replacement for its products. If you encounter any issues or have questions regarding the Vehicle Exit Wand Sensor, please do not hesitate to contact loosoo customer support. Refer to your purchase documentation or the loosoo official website for specific warranty terms and contact information.