MaMa Store Atena Reversible Column Cabinet

Introduction

This manual provides detailed instructions for the assembly, installation, and maintenance of your MaMa Store Atena Reversible Column Cabinet. Please read all instructions carefully before beginning assembly to ensure safe and correct installation.

Image: The Atena column cabinet integrated into a modern bathroom design, showcasing its aesthetic and functional placement.

Important Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

• Any pre-drilled holes with non-linear edges are not considered manufacturing defects, as they do not compromise the stability or use of the furniture. These holes will be covered by components, hinges, and caps during assembly.
• If glue residue is present along the edge of a component, remove it with a slightly damp cloth.
• Assemble the furniture according to the instructions without forcing connections.
• Install the cabinet on horizontal surfaces, avoiding impacts. Placement on uneven surfaces can cause stress on connection points, leading to deformation and malfunction of door and drawer closing mechanisms. Such malfunctions are not considered manufacturing defects.
• Do not place wet or hot objects directly on the furniture surfaces. In case of contact with water or other substances, clean immediately with soft, absorbent textile materials.
• Install the furniture in well-ventilated areas, away from direct sunlight and water contact. This furniture is not designed for outdoor installation. Avoid direct contact with water.
• The cabinet is designed to withstand normal humidity conditions (steam, accidental splashes). Exposure to high humidity will cause deterioration (swelling) not covered by warranty.
• Position bathroom furniture away from heat sources; maintain a minimum distance of 30 cm.
• Grease or liquid stains should only be cleaned with a dry cloth.
• Warning: In case of tipping or falling, the cabinet can cause serious, even fatal, injuries. To prevent this risk, the cabinet must be securely fastened to the wall. The method of fastening depends on the type and resistance of your wall. Therefore, any fastening materials (e.g., wall plugs, hooks, screws) included in the package, if any, are indicative and must be verified and replaced if necessary, depending on your specific wall type. Wall anchors are NOT included.

Product Specifications

Image: Diagram showing the dimensions of the cabinet: 30 cm width, 22 cm depth (20 cm side panel only), and 110 cm height.

Package Contents

Your MaMa Store Atena Column Cabinet package includes the following components:

• All necessary engineered wood panels for the cabinet structure.
• 1 reversible door with push-and-pull opening mechanism.
• 2 internal glass shelves (4mm thick).
• 1 fixed central shelf.
• Mounting hardware (screws, dowels, hinges, etc.).
• Assembly instructions manual.

Note: Wall anchors (Fischer) suitable for your specific wall type are NOT included and must be purchased separately.

Image: Illustration of the cabinet's internal structure, highlighting the two glass shelves and one fixed central shelf.

Setup and Assembly

The MaMa Store Atena cabinet is supplied in a kit for self-assembly. Follow these steps carefully:

1. Unpack Components: Carefully unpack all parts and verify against the included parts list in the assembly instructions. Ensure no parts are missing or damaged.
2. Prepare Workspace: Choose a clean, flat, and spacious area for assembly. Lay down a soft cloth or cardboard to protect the furniture panels from scratches.
3. Follow Instructions: Refer to the detailed assembly instructions provided in the package. These instructions will guide you through connecting the panels, installing the fixed central shelf, and inserting the glass shelves.
4. Install Hinges and Door: Attach the metal hinges to the cabinet body and the reversible door. The door can be mounted to open from either the left or right side.
5. Adjust Hinges: After installing the door, adjust the hinges to ensure proper alignment and smooth operation of the push-and-pull opening system.
6. Wall Mounting Preparation: Identify the desired location for the cabinet on your wall. Use a level to mark the drilling points accurately.
7. Secure to Wall: Drill holes in the wall at the marked points. Insert appropriate wall anchors (NOT included) suitable for your wall type (e.g., concrete, plasterboard). Secure the cabinet to the wall using the provided mounting hardware and your chosen wall anchors. Ensure the cabinet is firmly attached and stable to prevent tipping.

Image: Front view of the assembled MaMa Store Atena column cabinet with its door closed.

Image: Side view of the cabinet with its door open, revealing the two adjustable glass shelves and the fixed central shelf.

Operating and Use

The MaMa Store Atena cabinet is designed for versatile storage in various rooms.

• Door Operation: The cabinet features a push-and-pull opening system. Gently press the door to release the latch and open it. Press again to close and secure.
• Reversible Door: The door can be installed to open from either the left or right side, offering flexibility for your space.
• Storage: Utilize the two glass shelves and one fixed shelf for organizing items such as towels, toiletries, decorative objects, or small utensils.
• Placement: This column cabinet is suitable for bathrooms, bedrooms, hallways, or living rooms, providing practical storage without occupying excessive floor space.

Image: Interior view of the cabinet, demonstrating how items can be stored on the glass shelves.

Maintenance and Care

Proper care will ensure the longevity and appearance of your cabinet.

• Cleaning: The engineered wood panels and linear design make this cabinet easy to clean. Use a soft, slightly damp cloth for general cleaning. Avoid abrasive cleaners or harsh chemicals.
• Spills: In case of water or other liquid spills, wipe immediately with a soft, absorbent cloth to prevent damage to the laminate finish.
• Humidity: While designed for normal humidity, avoid prolonged exposure to high humidity environments to prevent swelling or deterioration.
• Heat: Keep the cabinet away from direct heat sources, maintaining a minimum distance of 30 cm.
• Glass Shelves: Clean glass shelves with a standard glass cleaner and a soft cloth.

Image: Close-up showing the water-resistant properties of the engineered wood material, emphasizing ease of cleaning.

Troubleshooting

If you encounter any issues during or after assembly, refer to the following common solutions:

• Door not closing properly: Check hinge alignment. Adjust hinges as per the assembly instructions to ensure the door closes flush and the push-and-pull mechanism engages correctly.
• Cabinet feels unstable: Ensure all screws are tightened. Verify that the cabinet is securely fastened to the wall using appropriate wall anchors. If the wall anchors are not suitable for your wall type, replace them.
• Missing parts: Double-check the package contents against the parts list in the assembly manual. If parts are genuinely missing, contact customer support.
• Difficulty with assembly: Re-read the assembly instructions carefully. Ensure each step is followed in sequence. Do not force components together.

Warranty and Support

For any questions, missing parts, or support regarding your MaMa Store Atena cabinet, please refer to the contact information provided in your original purchase documentation or visit the MaMa Store website.

Please note that damage resulting from improper assembly, incorrect installation (e.g., not using suitable wall anchors), exposure to excessive humidity or heat, or failure to follow care instructions may not be covered under warranty.

Image: Back view of the MaMa Store Atena column cabinet, showing its construction.