Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Artcraft AC11815BB Burford 5-Light Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation is crucial for safety and optimal performance.
Important Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not qualified. Consult a licensed electrician.
- Always turn off the main power supply at the circuit breaker before installing, cleaning, or replacing light bulbs.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- This fixture is designed for indoor use only. Do not expose to water or moisture.
- Use only the specified bulb type and wattage to avoid overheating and potential fire hazards.
- Do not hang anything from the fixture.
- Handle glass components with care to prevent breakage.
Package Contents
Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are satisfied with the product. If any parts are missing or damaged, contact Artcraft customer service.
- Pendant Light Fixture (AC11815BB)
- Mounting Hardware Kit (crossbar, mounting screws, wire nuts)
- Glass Shades (5 units)
- Instruction Manual
Setup and Installation
Tools Required (Not Included):
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Electrical Tape
- Ladder
Installation Steps:
- Turn off Power: Locate the circuit breaker controlling the light fixture's power supply and turn it OFF. Verify power is off using a voltage tester.
- Prepare Mounting: Remove the old fixture if applicable. Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is securely fastened.
- Wiring Connections:
- Connect the fixture's bare copper ground wire to the green or bare copper ground wire from the junction box using a wire nut.
- Connect the fixture's white wire (neutral) to the white wire from the junction box using a wire nut.
- Connect the fixture's black wire (hot) to the black wire from the junction box using a wire nut.
- Wrap electrical tape around each wire nut connection for added security.
- Mount Fixture: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws provided.
- Attach Glass Shades: Carefully attach each of the five glass shades to the fixture according to the design. Ensure they are seated properly and secured.
- Install Bulbs: Insert five incandescent bulbs (not included) into the sockets. Refer to the specifications for the maximum wattage.
- Restore Power: Turn the power back ON at the circuit breaker. Test the fixture to ensure it functions correctly.
Image: The Artcraft AC11815BB Burford 5-Light Pendant Light, showcasing its brass and black finish with clear glass shades, as it would appear when installed.
Image: A detailed view of one of the glass shades and the surrounding brass/black frame of the Artcraft AC11815BB Burford Pendant Light, highlighting the material and design.
Operating Instructions
Once properly installed and powered, the Artcraft AC11815BB Burford Pendant Light operates like any standard light fixture. Use a wall switch (not included) connected to the fixture's circuit to turn the light on and off.
Maintenance
Cleaning:
- Always ensure the power is OFF before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- For glass shades, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.
Bulb Replacement:
- Turn off the power at the circuit breaker.
- Allow bulbs to cool completely before touching.
- Carefully unscrew the old bulb.
- Screw in a new bulb of the correct type and wattage (refer to specifications).
- Restore power and test.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture; Loose wiring; Faulty bulb; Faulty wall switch | Check circuit breaker; Verify all wire connections are secure; Replace bulb; Test wall switch or consult electrician |
| Flickering light | Loose bulb; Incorrect bulb type; Loose wiring connection | Tighten bulb; Ensure correct bulb type/wattage; Check wiring connections (power off) |
| Fixture hums | Incompatible dimmer switch; Loose wiring | Ensure dimmer switch is compatible with incandescent bulbs; Check wiring connections (power off) |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AC11815BB |
| Brand | Artcraft |
| Finish | Brass/Black |
| Material | Glass |
| Lamp Type | Incandescent |
| Number of Lights | 5 |
| Max Wattage per Bulb | 40 watts |
| Total Wattage | 200 watts |
| Product Dimensions | 48 x 6 x 10.5 inches (Length x Width x Height) |
| Item Weight | 18 pounds |
| Power Source | Corded Electric |
| Specific Uses | General Purpose |
Warranty and Support
For warranty information or technical support, please contact Artcraft customer service directly. Retain your proof of purchase for any warranty claims.