1. Introduction
Thank you for choosing the Art Leon Swivel Desk Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
Figure 1: The Art Leon Swivel Desk Chair in a typical office environment.
2. Product Overview
The Art Leon Swivel Desk Chair is designed with a mid-century modern aesthetic, featuring faux leather upholstery and a 360-degree swivel function. It is suitable for various indoor settings such as home offices, living rooms, and bedrooms.
2.1 Key Features
- Premium Faux Leather Upholstery: Provides a soft touch and durable surface.
- Sturdy Construction: Built with a poplar and plywood frame for stability and longevity.
- 360° Swivel Function: Allows for easy rotation and flexibility.
- Comfort and Support: Engineered to offer a balanced level of firmness for comfortable seating.
- Solid Wood Legs: Equipped with adjustable foot pads for stability and floor protection.
- Elegant Armrests: Curved wooden armrests enhance the chair's design and provide support.
2.2 Product Dimensions
Refer to the diagram below for detailed product dimensions.
Figure 2: Product Dimensions. The chair measures 21.26"W x 23.23"D x 29.72"H, with a seat height of 18.11".
2.3 High-Quality Craftsmanship
The chair features bentwood craftsmanship, where wood is meticulously heated and bent under precise control. This process imbues each piece with flexibility and durability, resisting deformation and cracking over time.
Figure 3: Bentwood craftsmanship for enhanced durability.
3. Setup and Assembly Instructions
Assembly of the Art Leon Swivel Desk Chair is straightforward. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
3.1 Package Contents
- Chair Seat and Backrest Assembly (1)
- Chair Base with Swivel Mechanism (1)
- Hardware Pack (Screws, Allen Wrench)
3.2 Assembly Steps
- Carefully unpack all components and verify against the package contents list.
- Place the chair seat and backrest assembly upside down on a soft, protected surface.
- Align the chair base with the pre-drilled holes on the underside of the seat assembly.
- Secure the chair base to the seat assembly using the provided screws and Allen wrench. Ensure all screws are tightened firmly but do not overtighten.
- Turn the chair upright. The assembly is now complete.
Figure 4: Key components and materials of the chair, including the elegant armrest and solid wood legs.
4. Operating Instructions
The Art Leon Swivel Desk Chair is designed for simple and intuitive use.
4.1 Swivel Function
The chair features a 360-degree swivel mechanism integrated into its base. To rotate, simply apply gentle pressure in the desired direction. The swivel action is smooth and silent, allowing for easy movement without repositioning the entire chair.
Figure 5: The chair's 360-degree swivel capability and anti-slip foot pads.
4.2 Weight Capacity
The chair is designed to support a maximum weight of 265 pounds (120 kg). Exceeding this limit may compromise the chair's stability and structural integrity.
5. Maintenance and Care
Proper care will extend the life and appearance of your Art Leon Swivel Desk Chair.
5.1 Faux Leather Upholstery Care
- Regular Cleaning: Wipe the faux leather surface with a soft, damp cloth to remove dust and light spills.
- Stain Removal: For tougher stains, use a mild soap solution diluted with water. Apply with a soft cloth, then wipe clean with a separate damp cloth and dry thoroughly. Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack over time.
- Sharp Objects: Keep sharp objects away from the upholstery to prevent punctures or tears.
5.2 Wood Frame and Legs Care
- Cleaning: Wipe wooden surfaces with a dry or slightly damp cloth. Avoid excessive moisture.
- Inspections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Floor Protection: The chair's legs are equipped with anti-scratch foot pads. Ensure these are intact and replace if damaged to protect your flooring.
6. Troubleshooting
If you encounter any issues with your Art Leon Swivel Desk Chair, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels unstable or wobbly. | Loose screws or uneven floor surface. | Check and tighten all assembly screws. Adjust the chair's position or use the adjustable foot pads to level the chair on uneven surfaces. |
| Swivel mechanism is stiff or noisy. | Accumulated dust or lack of lubrication. | Clean the swivel mechanism area. If the issue persists, a small amount of silicone-based lubricant may be applied to the moving parts (avoid oil-based lubricants on wood). |
| Discomfort during prolonged sitting. | Individual preference or posture. | While the chair offers balanced comfort, individual comfort can vary. Consider adding a small cushion for additional lumbar support if needed. Ensure correct posture. |
| Wood finish appears damaged or peeling. | Wear and tear, or manufacturing defect. | For minor issues, wood repair kits may be used. For significant damage or suspected manufacturing defects, contact Art Leon customer support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Art Leon |
| Model Name | CC028 |
| Color | Beige |
| Product Dimensions (D x W x H) | 23.23" x 21.26" x 29.72" |
| Seat Height | 18.11 inches |
| Seat Depth | 16.14 inches |
| Maximum Weight Recommendation | 265 Pounds (120 kg) |
| Material | Faux Leather, Poplar and Plywood Frame, Walnut Veneers |
| Style | Mid-Century Modern |
| Item Weight | 17.16 pounds |
| Indoor/Outdoor Usage | Indoor |
8. Warranty and Support
For specific warranty information regarding your Art Leon Swivel Desk Chair, please refer to the documentation included with your purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects and material flaws under normal use.
For customer support, inquiries, or to report any issues, please contact Art Leon customer service through their official website or the retailer where the product was purchased. Please have your model number (CC028) and purchase date available when contacting support.