Besiost AV Media Stand with Outlets and LED Lights

Introduction

Thank you for choosing the Besiost AV Media Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new media stand. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The Besiost AV Media Stand, featuring a grey walnut finish and integrated LED lighting, displayed in a living room environment with various audio components.

Safety Information

• Do not overload the shelves beyond their stated capacity. Overloading can cause instability and damage.
• Ensure the unit is stable and level before placing any equipment on it. Use the adjustable footpads to achieve proper leveling.
• Keep all electrical components, including the power strip and LED strip, away from water or damp environments.
• Do not attempt to modify the electrical components. Use only as intended.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Assemble the unit on a soft, clean surface to prevent scratches.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Besiost customer support.

• Media Stand Boards (Engineered Wood)
• Metal Frame Components
• Embedded Power Strip (4 x 120V outlets, 2 x USB ports)
• LED Strip with Remote Controller
• Adjustable Footpads
• Assembly Hardware (screws, bolts, etc.)
• Screwdriver
• Hex Tool
• Velcro Tape (1 pc)
• Instruction Manual

Image: A close-up view of the embedded power strip, showing four 120V AC outlets and two 5V/2A USB ports, along with the included Velcro tape and 6.5-foot power cord.

Setup & Assembly

Assembly is designed to be straightforward. All necessary hardware and tools are provided. Follow the pictorial instructions included in your package for detailed steps.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent damage.
2. Attach Metal Frames: Secure the metal frame components to the main boards using the provided hardware. Ensure all connections are tight.
3. Install Shelves: Insert the adjustable shelves into the desired positions. The design allows for flexible height adjustments to accommodate various audio equipment.
4. Mount Power Strip: The power strip is easily assembled and integrated into the stand. Connect it according to the instructions.
5. Attach LED Strip: The LED strip is pre-attached to the bottom of the top shelf. Ensure its connection is secure.
6. Adjust Footpads: Once assembled, place the stand in its intended location. Adjust the individual footpads to ensure the unit is perfectly level, which is crucial for sensitive equipment like turntables.

Image: A diagram illustrating the dimensions of the Besiost AV Media Stand, showing its height of 31.2 inches, width of 23.6 inches, and depth of 15.6 inches, with shelf spacing details.

Image: The Besiost AV Media Stand highlighting its strong structure, featuring thick engineered wood boards and a robust metal frame for stability.

Operating Instructions

Using the Embedded Power Strip

• Connect the media stand's main power cord to a standard 120V wall outlet.
• Plug your audio/video components into the four 120V AC outlets provided on the power strip.
• Use the two USB ports (5V/2A) to charge compatible devices.
• Utilize the included Velcro tape to manage cables and keep them organized, preventing clutter.

Controlling the LED Strip

• The LED strip, located under the top shelf, is controlled by the supplied remote controller.
• Point the remote at the LED receiver to change colors, adjust brightness, or select various lighting modes.
• Refer to the LED remote's specific instructions for a full list of functions and options.

Image: The Besiost AV Media Stand showcasing its built-in LED lights illuminating the upper shelf and indicating the presence of two adjustable storage shelves below.

Maintenance

• Cleaning: Wipe the surfaces of the media stand with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
• Leveling: Re-check the leveling of the stand occasionally, especially if it has been moved or if heavy equipment has been added or removed. Adjust footpads as needed.

Troubleshooting

Power Strip Not Working

• Ensure the main power cord is securely plugged into a functional wall outlet.
• Check if the wall outlet itself is receiving power by testing it with another device.
• Verify that the power strip is correctly installed and connected within the media stand.

LED Lights Not Functioning

• Confirm the LED strip is properly connected to the power source within the stand.
• Ensure the remote control has working batteries and is pointed directly at the LED receiver.
• Check for any obstructions between the remote and the receiver.

Stand is Unstable

• Adjust the individual footpads at the base of the stand to ensure it is level on uneven floors.
• Verify that all assembly hardware (screws, bolts) are securely tightened.
• Ensure the weight distribution on the shelves is balanced and not exceeding the stand's capacity.

Specifications

Warranty & Support

For specific warranty details, please refer to the documentation included with your purchase or contact Besiost customer service directly. If you encounter any issues or have questions regarding your Besiost AV Media Stand, please reach out to our support team.

Besiost Customer Support:

• Visit the official Besiost website for contact information.
• Refer to your purchase receipt or platform for direct seller contact options.