Introduction
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Frizzlife WB99 Countertop Reverse Osmosis System. Please read this manual thoroughly before using the product and retain it for future reference.
Image: The Frizzlife WB99 Countertop Reverse Osmosis System, showcasing its compact design and the included dual pitchers. This system provides purified, alkaline water directly from your countertop.
Safety Information
- Ensure the system is placed on a stable, level surface.
- Do not immerse the main unit in water or other liquids.
- Use only the provided power adapter.
- Keep out of reach of children.
- Unplug the system before cleaning or performing maintenance.
- Do not operate the system if any part is damaged. Contact customer support.
Package Contents
Verify that all items are present in the package:
- Frizzlife WB99 Main Unit
- Water Filter Cartridge (Pre-installed or separate)
- Two Water Pitchers
- Power Adapter
- User Manual (this document)
Product Overview
The Frizzlife WB99 is a countertop reverse osmosis system designed for easy use and superior water purification. It features a multi-stage filtration process and an alkaline post-filter.
Key Features:
- 0.0001 Micron RO Filtration & Alkaline pH+: Effectively reduces over 1000 contaminants including chlorine, fluoride, lead, heavy metals, arsenic, chloramine, TDS, limescale, and VOCs. The SC90 alkaline filter raises pH.
- 4 Dispensing Volume Modes: Offers 4oz, 8oz, 17oz, and continuous dispensing options.
- Large Water Tank: 152 oz (4.5 L) capacity, removable for easy refilling and cleaning.
- Real-Time Monitoring: Smart touch panel displays TDS results, filter life, and water quality (indicator turns red if filtered water is over 24 hours old).
- Portable Pitcher: Filtered water can be taken anywhere in the included portable pitcher.
- Zero Installation: Plug and use design, no drilling or plumbing required.
- Easy Filter Replacement: Twist-in design for quick, tool-free filter changes.
Image: Diagram illustrating the Frizzlife WB99's filtration capabilities, including removal of large particles, chlorine, fluoride, heavy metals, and TDS reduction, alongside the SC90 alkaline filter and FCR100+ RO membrane.
Image: A comparison chart highlighting the advantages of the WB99-C, such as portable pitcher, alkaline water, plug-and-use installation, filter life monitoring, TDS display, low noise level, and suitability for various scenarios.
Setup
The Frizzlife WB99 system requires zero installation. Simply follow these steps:
- Unpack: Remove all components from the packaging.
- Place the Unit: Position the main unit on a stable, flat countertop.
- Fill the Water Tank: Remove the raw water tank (the larger tank) and fill it with tap water. Place it back securely on the unit.
- Plug In: Connect the power adapter to the unit and plug it into a standard electrical outlet.
- Initial Flush: For first-time use or after filter replacement, it is recommended to dispense and discard the first full pitcher of water to flush the system.
Image: Visual guide for the simple setup process: 1. Plug in the power cord. 2. Fill the water tank. 3. Tap the screen to select dispensing volume. 4. Dispense water. Emphasizes no drilling or plumbing is required.
Operating Instructions
Dispensing Water:
- Ensure the filtered water pitcher is correctly placed on the dispensing platform.
- The smart touch panel will illuminate.
- Select your desired dispensing volume by tapping the corresponding button: 4oz, 8oz, or 17oz. For continuous dispensing, deselect all volume buttons.
- The system will begin filtering and dispensing water into the pitcher.
- The display will show real-time TDS readings during the process.
Image: The control panel of the Frizzlife WB99, showing options for 4oz, 8oz, 17oz, and continuous dispensing, along with filter life indicators and real-time TDS display.
Water Quality Indicator:
The system features a water quality indicator. If the filtered water in the pitcher has been sitting for over 24 hours, the indicator will turn red, signaling that the water should be discarded and fresh water dispensed.
Sleep Mode:
The system will automatically enter sleep mode after 5 minutes of no operation to conserve energy.
Maintenance
Cleaning the Water Tank and Pitchers:
The raw water tank (152 oz / 4.5 L) is removable for easy cleaning. It is recommended to clean the raw water tank and both pitchers regularly with mild soap and water, then rinse thoroughly.
Image: The large 152 oz (4.5 L) capacity water tank of the Frizzlife WB99, shown being refilled and cleaned, highlighting its convenience.
Filter Replacement:
The smart display will indicate when filters need replacement. The twist-in design makes replacement simple and tool-free.
- Unplug the system from the power outlet.
- Locate the filter cartridge(s) on the side of the unit.
- Twist the old filter counter-clockwise to unlock and pull it out.
- Insert the new filter cartridge, align the arrows, and twist clockwise to lock it into place.
- Plug the system back in. Perform an initial flush as described in the Setup section.
For replacement filters, search for “Frizzlife FCR100+ Filter” and “Frizzlife SC90 Filter”.
Image: Individual images of the Frizzlife SC90 and FCR100+ filter cartridges, indicating their appearance for replacement purposes.
Image: A visual guide demonstrating the simple twist-and-pull method for replacing the RO filter, which lasts for 12 months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensed / System not turning on | Power cord not connected; Water tank empty or not properly seated; System in sleep mode. | Check power connection; Refill water tank and ensure it’s seated correctly; Tap the screen to wake the system. |
| Water tastes bad or TDS is high | Filters need replacement; Initial flush not performed; Contaminated raw water. | Check filter life indicator and replace filters if necessary; Perform initial flush; Ensure raw water source is potable. |
| Water quality indicator is red | Filtered water in pitcher has been sitting for over 24 hours. | Discard the old filtered water and dispense fresh water. |
| System is noisy | Normal operation sound; Air in the system. | Some noise during filtration is normal (typically below 50dB). If excessively loud, contact support. Ensure no air bubbles are trapped. |
| Leakage | Water tank or pitcher not properly seated; Loose filter. | Ensure water tank and pitcher are correctly positioned; Check that filters are securely twisted into place. |
Specifications
- Model Name: WB99-C Dual-Pitcher Set
- Product Dimensions: 16.5"L x 9"W x 14.8"H
- Weight: Approximately 20 Pounds
- Raw Water Tank Capacity: 152 oz (4.5 L)
- Filtration Accuracy: 0.0001 Micron (RO membrane)
- Pure to Drain Ratio: 3.5:1 (Water Saving)
- Noise Level: < 50 dB
- Special Feature: Portable, Real-time TDS display, Filter life monitoring, Alkaline pH+
- Manufacturer: Frizzlife
- UPC: 850040788921
Image: A graphic illustrating the WB99’s 1400% water saving efficiency with a 3.5:1 pure to drain ratio, compared to other brands’ 1:4 ratio.
Image: The Frizzlife WB99 operating with a low noise level, indicated as less than 50dB, ensuring quiet performance.
Warranty and Support
For warranty information and technical support, please refer to the official FRIZZLIFE website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Visit the official FRIZZLIFE store: FRIZZLIFE Store on Amazon
Additional Information
Portability and Usage Scenarios:
The compact size (9"L x 16.5"W x 14.8"H) and no-installation design make the WB99 highly portable. It can be easily moved and used in various locations such as the living room, office, bedroom, or RV.
Image: The Frizzlife WB99 system shown in different environments, including an RV, bedroom, living room, and office, demonstrating its versatility and portability.
NSF/ANSI 58 Certified:
The RO membrane is independently tested and certified by NSF International against NSF/ANSI 58 for material and structural integrity requirements, ensuring high rejection rates and a long lifespan.
Image: A graphic highlighting the NSF/ANSI 58 certification of the RO membrane, emphasizing its high rejection rate, 1-year lifespan, and composite filter elements.