HENGCMM ESWT Extracorporeal Shock Wave Therapy Machine User Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation of your HENGCMM Extracorporeal Shock Wave Therapy (ESWT) Machine. This device is designed to deliver impulse waves for deep muscle massage and pain relief, targeting various musculoskeletal conditions. Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Information

Important Safety Precautions:

• Consult a healthcare professional before using this device, especially if you have pre-existing medical conditions, are pregnant, or have implanted electronic devices.
• Do not use on areas with open wounds, infections, tumors, or acute inflammation.
• Avoid direct application over major nerves, blood vessels, or organs.
• Keep the device out of reach of children.
• Ensure the power supply matches the device's requirements.
• Only use accessories and parts supplied or approved by the manufacturer.
• Discontinue use immediately if you experience discomfort or adverse reactions.

3. Product Overview

The HENGCMM ESWT Machine is a comprehensive system for targeted pain therapy. It consists of a main control unit, a treatment handle, and a variety of interchangeable working heads.

3.1 Components

• Main Control Unit with Digital Display
• Treatment Handle
• 10 Specialized Working Heads
• 5 Universal Silicone Massage Heads
• Power Cable

3.2 Key Features

• Adjustable Energy Levels (5-250mJ)
• Adjustable Frequency (1-16Hz)
• Adjustable Strike Count (500-2500 times)
• Multiple Working Heads for Diverse Applications

Figure 1: HENGCMM ESWT Machine Main Unit and Accessories. This image displays the main unit of the ESWT machine, featuring a digital display, the attached treatment handle, and a selection of interchangeable working heads.

Figure 2: Assortment of 10 Working Heads and 5 Silicone Heads. This image showcases the ten different types of working heads, numbered 1 through 10, along with five universal blue silicone massage heads, designed for various applications.

4. Setup

1. Unpacking: Carefully remove all components from the packaging and inspect for any damage.
2. Connect Handle: Securely attach the treatment handle to the designated port on the main unit.
3. Attach Working Head: Select the appropriate working head for your intended treatment and firmly attach it to the treatment handle.
4. Power Connection: Connect the power cable to the main unit and then plug it into a suitable electrical outlet (AC110V-AC220V, 50Hz/60Hz).
5. Power On: Press the power button on the main unit.
6. Initial Login: The initial password for the device is 23456. Enter this password to access the main interface.
7. Changing Password: To change the password, ensure the handle is inserted. Open the device and press and hold the green button on the handle to enter the password change interface.

5. Operating Instructions

The ESWT machine offers customizable settings for various treatment needs.

1. Access Main Interface: After powering on and entering the password, the main interface will display treatment options.
2. Select Treatment Area: The interface may display diagrams of the human body or specific conditions. Select the relevant area for treatment.
3. Adjust Parameters: Use the controls on the digital display to set the following:
   • Set Times: Duration of the treatment session.
   • Energy Level: Adjust from 5mJ to 250mJ (27 gears).
   • Frequency: Adjust from 1Hz to 16Hz (16 gears).
   • Number of Hits: Adjust the total number of impulses (5 gears: 500, 1000, 1500, 2000, 2500 times).
4. Choose Working Head: Based on the selected treatment area and desired intensity, choose one of the 10 specialized working heads or 5 silicone heads.
5. Begin Treatment: Once all parameters are set, press the 'Start' button on the interface. Apply the working head gently to the target area.
6. Monitor Progress: Observe the treatment area and the patient's comfort level throughout the session. Adjust settings as necessary.
7. End Treatment: Press the 'Return' or 'Stop' button to conclude the session.

Figure 3: Control Panel Settings for Treatment. Screenshots of the machine's control panel, illustrating how to set parameters like treatment time, energy level, and frequency for specific body parts such as the lower leg and for ED treatment, along with recommended working heads.

5.1 Treatment Applications

The ESWT machine is designed to address various conditions, including:

• Pain relief for joints and muscles (e.g., shoulder, back, cervical pain).
• Support for sport injury recovery.
• Improvement of microcirculation and metabolism.
• Assistance with Erectile Dysfunction (ED) treatment.

Figure 4: ESWT Treatment Areas and Functions. A diagram of the human body with red dots marking potential treatment areas such as neck, shoulders, elbows, hands, buttocks, knees, bones, and ankles. Accompanying text lists functions including pain relief, sport injury treatment, cellulite treatment, and Erectile Dysfunction (ED) treatment.

Figure 5: Benefits of ESWT. A comparative diagram showing 'Before' and 'After' states, depicting improved blood circulation and tissue remodeling, along with a list of benefits such as improved blood circulation, pain relief, improved micro-circulation and metabolism, accelerated bone healing, and promotion of collagen production.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your ESWT machine.

• Cleaning: After each use, wipe the main unit and handle with a soft, damp cloth. Disinfect working heads with an appropriate medical disinfectant. Ensure all components are dry before storage.
• Storage: Store the device and its accessories in a clean, dry, and cool environment, away from direct sunlight and extreme temperatures.
• Inspection: Regularly inspect the power cable, handle, and working heads for any signs of wear or damage. Do not use if any damage is observed.

7. Troubleshooting

If you encounter issues with your ESWT machine, refer to the following common problems and solutions:

• Device does not power on: Check if the power cable is securely connected to both the device and the electrical outlet. Ensure the outlet is functional.
• No impulse from handle: Verify that the handle is correctly attached to the main unit and that a working head is securely fastened. Check the energy and frequency settings on the display.
• Error message on display: Note the error code or message and refer to the manufacturer's support for specific guidance.

For issues not listed here, please contact customer support.

8. Specifications

Figure 6: HENGCMM ESWT Machine Specifications. A table detailing the technical specifications of the ESWT machine, including model, color, voltage, frequency, power, current, energy level, frequency settings, hit adjustment gears, number of working heads, instrument size, packing size, net weight, and gross weight.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product serial number handy when contacting support.