Introduction
This manual provides instructions for the operation and maintenance of your Generic replacement remote control. This remote is designed to be compatible with specific AC Air Conditioner models, including Tesla TTMY-09CHW, TTMY-12CHW, Klarstein Grandbreeze Eco 12K, and TCL TAC-07CPB/RS. Please ensure your original remote matches the appearance of this replacement remote for full compatibility.
Important Note: This is a replacement remote control and is not a universal remote. While it is designed to function with the listed models, some advanced or less common functions present on the original remote may not be available. No setup or coding is required; simply insert batteries for operation.
Safety Information
- Keep batteries out of reach of children.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period.
- Avoid exposing the remote control to direct sunlight, heat sources, or moisture.
Product Overview
The remote control features a straightforward button layout for easy operation of your air conditioner. Below is an illustration of the remote's front panel and a description of its primary functions.
Figure 1: Front view of the remote control, showing all buttons. The remote is black with clearly labeled icons for power, mode, temperature adjustment, fan speed, timer, and Celsius/Fahrenheit toggle.
Button Functions:
- Power Button (): Turns the air conditioner ON or OFF.
- Mode Button (): Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- Temperature Up/Down Buttons (): Adjusts the desired temperature setting.
- Fan Speed Button (): Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- Swing Button (): Activates or deactivates the air swing function.
- Timer Button (): Sets or cancels the timer function.
- C/F Button (): Toggles the temperature display between Celsius and Fahrenheit. Note: This remote may be Celsius only depending on the specific AC unit's capabilities.
Setup: Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 2: Back view of the remote control, showing the battery compartment cover.
Figure 3: Remote control with the battery cover removed, illustrating the correct orientation for AAA battery insertion.
The remote control is now ready for use. No further setup or programming is required.
Operating Instructions
Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.
- Power ON/OFF: Press the Power button once to turn the unit on, and again to turn it off.
- Selecting Mode: Press the Mode button repeatedly to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto). The current mode will typically be displayed on the air conditioner unit.
- Adjusting Temperature: Use the Temperature Up () and Temperature Down () buttons to set your desired room temperature.
- Setting Fan Speed: Press the Fan Speed button to adjust the fan's intensity. Options usually include Low, Medium, High, and Auto.
- Activating Swing: Press the Swing button to start or stop the automatic louver movement, which helps distribute air evenly.
- Using the Timer: Press the Timer button to access timer settings. Refer to your air conditioner's main manual for specific timer programming details, as this remote provides the interface but the AC unit handles the logic.
- Changing Temperature Unit: Press the C/F button to switch the temperature display between Celsius and Fahrenheit. If your AC unit only supports one unit, this button may not function.
Maintenance
Battery Replacement:
Replace batteries when the remote control's range decreases or if the air conditioner does not respond to commands. Follow the battery installation steps outlined in the Setup section.
Cleaning:
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these can damage the remote's surface or internal components.
Troubleshooting
- Remote not responding:
- Check if batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Confirm the remote is pointed directly at the air conditioner.
- Certain functions not working:
- This replacement remote may not support all functions of your original remote. Refer to the Product Overview section for supported functions.
- Ensure your air conditioner model is listed as compatible.
- Temperature unit (C/F) not changing:
- Some air conditioner models may only support one temperature unit (e.g., Celsius only). The remote sends the command, but the AC unit dictates the display.
Specifications
| Product Type | Replacement Remote Control |
| Compatible Devices | AC Air Conditioners (Tesla TTMY-09CHW, TTMY-12CHW, Klarstein Grandbreeze Eco 12K, TCL TAC-07CPB/RS) |
| Power Source | 2 x AAA Batteries (not included) |
| Color | Black |
| Special Features | Infrared (IR) communication, Cooling & Heating functions, Celsius/Fahrenheit toggle (unit dependent) |
Warranty and Support
For any issues or questions regarding this replacement remote control, please contact the seller or retailer from whom you purchased the product. Specific warranty details, if any, are provided by the seller at the time of purchase.
