DTAPE DT50
DTAPE Laser Measure User Manual
Model: DT50 GEN2
Brand: DTAPE
Introduction
This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.
What's Included
- ACPOTEL 165 Ft Laser Measuring Device
- 1.5V AAA Batteries
- Portable Bag
- User Manual (this document)
- Hand Strap
- Package Box
Setup
Battery Installation
The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

Figure 1: DTAPE Laser Measure and included accessories.
Power On/Off
Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.
Operating Instructions
Basic Distance Measurement
1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

Figure 2: The ultra-HD LCD display showing measurement results.
Unit Conversion
To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.
Measurement Reference Point
The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

Figure 4: Switching between front and back measurement reference points.
Multiple Measurement Modes
The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:
- Distance: Single point-to-point measurement.
- Area: Calculates the area of a surface (length x width).
- Volume: Calculates the volume of a space (length x width x height).
- Pythagoras: Indirect measurement using the Pythagorean theorem (single or double).
- Continuous Measurement: Real-time tracking of distance as the device is moved.
- Addition/Subtraction: Add or subtract measurements.
- Data Storage: Stores historical measurement data.

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.
Official Product Video: DT50 Laser Distance Meter
Video 1: An official product video demonstrating the features and usage of the DT50 Laser Distance Meter, including various measurement modes and applications.
Maintenance
The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Store the device in its portable bag when not in use to protect it from dust and impacts.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
Troubleshooting
If you encounter issues with your DTAPE Laser Measure, consider the following:
- Device not powering on: Check battery installation and ensure batteries are not depleted. Replace if necessary.
- Inaccurate readings: Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
- Laser not visible: In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.
For persistent issues, refer to the detailed user manual included in the package or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | DTAPE |
| Model | DT50 GEN2 |
| Accuracy | ±1/16 inch |
| Measuring Range | 165 feet |
| Response Speed | 0.4 seconds |
| Display | 2" Ultra-HD LCD |
| IP Rating | IP54 (Water and Dust Resistant) |
| Power Source | 1.5V AAA Batteries |
| Material | Acrylonitrile Butadiene Styrene |
| Item Weight | 7 ounces |
Warranty and Support
Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.
For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.