All Pro Fireplace Proflame 2 Battery Holder (SIT 0584103) Instruction Manual

1. Product Overview

This document provides instructions for the All Pro Fireplace Replacement Proflame 2 Battery Holder, model SIT 0584103. This is an OEM replacement part designed specifically for Proflame 2 fireplace systems.

Important Compatibility Note: This battery holder is designed for Proflame 2 systems only, which utilize a 6-pin connector. It is not compatible with Proflame 1 systems, which use a 14-pin connector (model 0.584.221). Please verify your system's connector type before installation.

2. Package Contents

• 1 x All Pro Fireplace Proflame 2 Battery Holder (SIT 0584103)

3. Setup and Installation

Follow these steps to properly install your new Proflame 2 Battery Holder:

1. Safety First: Ensure your fireplace system is completely turned off and disconnected from any power source before beginning installation.
2. Locate Existing Battery Holder: Identify the current battery holder in your Proflame 2 fireplace system.
3. Disconnect Old Holder: Carefully disconnect the 6-pin connector from the old battery holder. Remove any existing batteries.
4. Remove Old Holder: Unscrew or unclip the old battery holder from its mounting position. Note that original screws may be too short for the new replacement; longer screws might be required (not included).
5. Inspect New Holder: Examine the new SIT 0584103 battery holder. Verify it has a 6-pin connector.
6. Connect New Holder: Connect the 6-pin connector from your fireplace system to the new battery holder. Ensure a secure connection.
7. Mount New Holder: Secure the new battery holder in place using appropriate screws.
8. Insert Batteries: Insert the required batteries (not included) into the new holder, observing correct polarity (+/-).
9. Test System: Reconnect power to your fireplace system and test its functionality with the new battery holder.

Image 1: The All Pro Fireplace Proflame 2 Battery Holder (SIT 0584103) showing the product label and battery terminals. This image helps identify the correct replacement part.

Image 2: Close-up view of the Proflame 2 Battery Holder's 6-pin connector, highlighted to emphasize compatibility. This image is crucial for verifying your system's connector type.

4. Operating Instructions

Once the battery holder is installed and batteries are inserted, your Proflame 2 system should be ready for operation. Refer to your fireplace system's main instruction manual for specific operating procedures, including remote control pairing and usage.

The battery holder provides power to the Proflame 2 system's receiver, enabling functions such as:

• Ignition of the fireplace.
• Flame height adjustment.
• Thermostatic control.
• Timer functions.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your battery holder:

• Battery Replacement: Replace batteries as needed. Use high-quality alkaline batteries for best performance. Do not mix old and new batteries, or different types of batteries.
• Cleaning: Periodically inspect the battery terminals for corrosion. If corrosion is present, carefully clean it with a cotton swab and a small amount of rubbing alcohol. Ensure the holder is dry before reinserting batteries.
• Storage: If the fireplace system will not be used for an extended period, remove the batteries from the holder to prevent leakage and potential damage.

6. Troubleshooting

If you encounter issues with your Proflame 2 Battery Holder, consider the following:

• System Not Responding:
  • Check if batteries are inserted correctly with proper polarity.
  • Replace old batteries with new ones.
  • Ensure the 6-pin connector is securely attached to the battery holder and the fireplace receiver.
• Intermittent Operation:
  • Inspect battery terminals for corrosion and clean if necessary.
  • Verify battery charge.
• Physical Damage: If the battery holder appears physically damaged, it may need to be replaced.

For further assistance, consult your fireplace system's main instruction manual or contact a qualified technician.

7. Specifications

8. Warranty and Support

Information regarding the specific warranty for the All Pro Fireplace Proflame 2 Battery Holder (SIT 0584103) is not available in the provided product data. For warranty details or technical support, please contact All Pro Fireplace or the manufacturer, SIT, directly. Retain your purchase receipt for any warranty claims.