Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity for each shelf. Overloading can cause damage or injury.
- Stability: Ensure the TV stand is placed on a flat, stable surface. Use anti-tip hardware if provided, especially in households with children or pets.
- Electrical Safety: When installing LED lights, ensure all connections are secure and follow electrical safety guidelines. Do not expose LED strips or power adapters to moisture.
- Assembly: Assemble the unit according to the instructions. Do not use power tools unless specified, as overtightening screws can cause damage.
- Glass Components: Handle glass shelves with care to prevent breakage. Ensure they are securely seated before placing items on them.
Package Contents
Verify all parts and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Image: Diagram of all components and hardware included in the package.
Boards:
- Board 1 (Top Panel) x1
- Board 2 (Middle Shelf) x1
- Board 3 (Base Panel) x1
- Board 4 (Left Side Panel) x1
- Board 5 (Right Side Panel) x1
- Board 6 (Vertical Support) x2
- Board 7 (Back Panel) x1
Hardware & Accessories:
- A (Cam Lock Screws) x25+2pcs
- B (Cam Locks) x25+2pcs
- C (Wooden Dowels) x14+2pcs
- D (Glass Shelf Supports) x4+1pcs
- E (Wood Screws) x4+1pcs
- F (Support Blocks) x5
- G (Small Screws) x10+2pcs
- H (Acrylic Columns) x4pcs
- J (Flat Head Screws) x4+1pcs
- K (Glass Shelf Tool) x1
- L (Invisible Stickers) x24
- M (LED Light Strip Set) x1set
- Glass Shelf x1
Setup & Assembly
Follow these steps carefully to assemble your TV stand. It is recommended to have two people for assembly.
Video: Detailed installation animation for the Cubehom LED TV Stand. This video guides you through each step of the assembly process, from identifying parts to securing the final components.
Step-by-Step Instructions:
- Prepare Board 2: Take out Board 2. Install 11 'A' cam lock screws into the designated screw holes. Then, insert 6 'C' wooden dowels into their respective holes.
- Prepare Board 3: Locate Board 3. Screw in 8 'A' cam lock screws and place 4 'C' wooden dowels.
- Prepare Boards 4 & 5: For Board 4, screw in 1 'A' cam lock screw and 1 'C' wooden dowel. Fix 2 'D' glass shelf supports using 2 'E' screws. Pay attention to the installation direction of accessory 'D'. Repeat this process for Board 5.
- Prepare Board 6: Find the two Board 6 pieces. For each, screw in 2 'A' cam lock screws and 1 'C' wooden dowel.
- Install Acrylic Columns on Board 1: Locate Board 1. Fix the 4 'H' shaped acrylic columns using 4 'O' shaped screws.
- Connect Board 1 and Board 2: Connect Board 1 and Board 2 using 4 'J' screws. Ensure correct orientation as shown in the video.
- Assemble Side Panels: Connect Board 4 and Board 5 with Board 7 (back panel). Secure this assembly with 2 'B' cam locks. When screwing in the 'B' cam locks, rotate them 90 degrees in the indicated direction.
- Attach Vertical Supports: Flip the assembled side panels. Connect the two Board 6 pieces and secure them with 4 'B' cam locks.
- Combine Main Structure: Flip the previous step's assembly. Connect it to Boards 1 and 2. Secure it with 11 'B' cam locks.
- Install Base Panel: Fix Board 3 to the bottom of the assembled structure. Secure it with 8 'B' cam locks.
- Attach Support Blocks: Fix the 5 'F' support blocks to the bottom of the TV stand using 10 'G' screws.
- Insert Glass Partition: Flip the TV cabinet upright. Carefully insert the glass partition into the designated slots. Use tool 'K' to fix the glass partition securely.
- Apply Invisible Stickers: Apply the 'L' size invisible stickers to each screw hole for a more aesthetically pleasing finish.
Operating Instructions (LED Lights)
Your Cubehom TV stand features integrated LED lighting for enhanced ambiance. Follow these steps to set up and operate the lights.
Image: The TV stand illuminated with blue LED lights, showcasing its modern design.
1. LED Strip Installation:
- Prepare Strips: Gently peel off the protective film from the back of the LED light strips. Be careful not to use excessive force.
- Placement: Paste the two light strips onto the back of Board 1 (top panel) and Board 7 (back panel) as indicated in the assembly video. Ensure they are positioned correctly for optimal lighting.
- Connect Power: Connect the power cord to the signal receiver. Then, connect the signal receiver to the light strip interface. Align the two arrows on the connectors to ensure a proper connection.
2. Using the Remote Control:
Image: The TV stand displaying various LED light colors, controlled by a remote.
- The included remote control allows you to power the LED lights on/off, change colors, adjust brightness, and select various lighting modes (e.g., flash, strobe, fade, smooth).
- Point the remote control directly at the signal receiver for best performance.
Video: A short preview video demonstrating the LED lights of the TV stand, showing various color changes and effects.
Maintenance
Proper care and maintenance will ensure the longevity and appearance of your TV stand.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Dusting: Regularly dust the unit to prevent buildup.
- Spills: Clean spills immediately with a dry cloth to prevent staining or damage to the wood.
- LED Lights: Ensure LED strips are free from dust and debris. If a strip malfunctions, check connections before considering replacement.
- Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your TV stand, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not turning on. | Power connection loose or incorrect. Remote control battery dead. | Check all power connections. Ensure arrows on LED connectors are aligned. Replace remote control battery. |
| TV stand feels unstable. | Screws are loose. Uneven floor surface. | Retighten all assembly screws. Move the stand to a level surface or use shims if necessary. |
| Glass shelf is not fitting correctly. | Glass shelf supports ('D' accessories) are not installed correctly. | Ensure the 'D' accessories are installed in the correct direction and fully seated. |
Specifications
Image: The Cubehom TV stand with key dimensions highlighted, including depth, width, and height.
| Feature | Detail |
|---|---|
| Brand | Cubehom |
| Model Name | A16-7 |
| Color | Grey |
| Product Dimensions | 16"D x 51"W x 21"H |
| Material | Engineered Wood |
| Item Weight | 36 Pounds |
| Mounting Type | Floor Mount |
| Number of Shelves | 1 (Glass) |
| Assembly Required | Yes |
| Special Feature | Integrated LED Lighting |
Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly.
For customer support, missing parts, or any questions regarding assembly or operation, please contact Home to Power, the seller, directly through your purchase platform.
Return Policy: This product is eligible for 30-day easy returns. Please refer to the return policy of your purchase platform for more details.