1. Introduction
Thank you for choosing the WeurGhy X12Pro Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features such as Bluetooth 5.3 connectivity, Environmental Noise Cancellation (ENC), and IPX7 waterproofing. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

2. Package Contents
Please verify that all items are present in your package:
- 2 x WeurGhy X12Pro Wireless Earbuds
- 1 x Charging Case
- 1 x USB-C Charging Cable
- 3 x Pairs of Silicone Eartips (S, M, L)
- 1 x User Manual
3. Setup
3.1. Initial Charging
- Place both earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the case and to a power source.
- The LED display on the charging case will indicate the charging status. A full charge takes approximately 1.5 hours for the case and earbuds.
3.2. Pairing with a Device
- Ensure the earbuds are fully charged.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing lights on the earbuds.
- On your device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
- Select "WeurGhy X12Pro" from the list of devices.
- Once connected, the earbuds will indicate successful pairing, and the lights will stop flashing.
- The earbuds will automatically reconnect to the last paired device when removed from the case, provided Bluetooth is enabled on the device.
4. Operating Instructions
4.1. Touch Controls
The WeurGhy X12Pro earbuds feature intelligent touch controls on each earbud. The following actions can be performed:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
- Activate Voice Assistant (Siri/Google Assistant): Triple tap on either earbud.
- Volume Up: Press and hold the right earbud.
- Volume Down: Press and hold the left earbud.
4.2. Power On/Off
- Power On: Open the charging case, or press and hold the touch area on both earbuds for 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or press and hold the touch area on both earbuds for 5 seconds.
4.3. Environmental Noise Cancellation (ENC)
The earbuds utilize ENC technology with four microphones to reduce background noise during calls, ensuring clear voice transmission. This feature is automatically active during phone calls.
5. Maintenance
5.1. Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove eartips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Avoid using abrasive materials or harsh chemicals.
5.2. Water Resistance (IPX7)
The WeurGhy X12Pro earbuds are IPX7 waterproof, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for workouts and use in rainy conditions. However, the charging case is not waterproof. Ensure earbuds are completely dry before placing them back into the charging case to prevent damage.
5.3. Storage
Store the earbuds in their charging case when not in use to protect them and keep them charged. Avoid extreme temperatures and direct sunlight.
6. Troubleshooting
If you encounter issues with your earbuds, please refer to the following common solutions:
- No Sound/Connection Issues:
- Ensure earbuds are charged.
- Verify Bluetooth is enabled on your device and the earbuds are paired.
- Try unpairing and re-pairing the earbuds.
- Restart your device.
- One Earbud Not Working:
- Place both earbuds back into the charging case, close the lid, and then open it again to reset.
- Ensure both earbuds are charged.
- Charging Issues:
- Check the USB-C cable and power adapter for damage.
- Ensure the charging contacts on the earbuds and in the case are clean and free of debris.
If problems persist, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | X12Pro |
| Bluetooth Version | 5.3 |
| Wireless Technology | Bluetooth |
| Audio Codecs | AAC/SBC |
| Driver Size | 13.2 mm Graphene Driver |
| Noise Cancellation | ENC (Environmental Noise Cancellation) |
| Playtime (Single Charge) | Up to 8 hours |
| Total Playtime (with Charging Case) | Up to 56 hours |
| Charging Time (Earbuds & Case) | Approx. 1.5 hours |
| Charging Port | USB-C |
| Water Resistance Rating | IPX7 (Earbuds only) |
| Control Method | Touch Control |
| Battery Composition | Lithium Polymer |
| Material | Plastic |
8. Warranty and Support
8.1. Warranty Information
The WeurGhy X12Pro Wireless Earbuds come with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
8.2. Customer Support
For any questions, technical assistance, or warranty claims, please contact WeurGhy customer service. We offer 24-hour customer support to assist you.
For the most up-to-date support information, please visit the official WeurGhy website or refer to the contact details provided with your product packaging.