Introduction
Thank you for purchasing the Artis SoundPro 500 Portable Bluetooth Party Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure proper functionality and to maximize your listening experience.
Important Safety Information
- Do not expose the speaker to water or excessive moisture. This product is not waterproof.
- Avoid placing the speaker near heat sources or in direct sunlight.
- Use only the provided power adapter for charging.
- Do not attempt to disassemble or modify the speaker. This will void the warranty.
- Keep out of reach of children.
What's in the Box
Upon unpacking, ensure all the following items are present:
- 1 x Artis SoundPro 500 Bluetooth Speaker
- 1 x Remote Control
- 1 x Wireless UHF Microphone
- 1 x Power Adapter
- 1 x AUX Cable
Product Overview
Image: Front view of the Artis SoundPro 500 speaker, showcasing its design and RGB LED lights.
The Artis SoundPro 500 is a versatile portable party speaker designed to deliver powerful audio with multiple connectivity options. It features a 100W RMS output, TWS functionality, RGB LED lights, and includes a wireless microphone and remote control for enhanced user experience.
Setup
1. Charging the Speaker
- Connect the provided power adapter to the DC 12V input port on the speaker.
- Plug the adapter into a power outlet.
- The charging indicator will illuminate. Allow sufficient time for a full charge (the 12000 mAh battery provides extended playtime).
2. Powering On/Off
- To power on, press and hold the Power button on the control panel.
- To power off, press and hold the Power button again.
3. Connecting the Wireless Microphone
Image: The Artis SoundPro 500 speaker shown with its included wireless microphone and remote control.
The wireless UHF microphone is pre-paired with the speaker. Simply insert batteries into the microphone and power it on. The speaker will automatically detect and connect to the microphone.
4. Using the Remote Control
The remote control allows for convenient operation of various speaker functions from a distance. Ensure the remote has working batteries and point it towards the speaker's front panel.
Operating Instructions
Image: Close-up of the Artis SoundPro 500 control panel, highlighting various input ports and control buttons.
1. Bluetooth Pairing
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth icon on the display.
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available devices and select "Artis SoundPro 500" from the list.
- Once connected, the speaker will emit a confirmation sound, and the Bluetooth icon will stop flashing.
- The Bluetooth range is approximately 10 meters.
2. TWS (True Wireless Stereo) Functionality
Image: Two Artis SoundPro 500 speakers positioned to illustrate True Wireless Stereo (TWS) connection, providing a combined 200W output.
To connect two Artis SoundPro 500 speakers for a stereo experience:
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS button. It will emit a sound indicating it's searching.
- On the second speaker, press the TWS button. The two speakers will automatically pair with each other.
- Once paired, connect your mobile device to the primary speaker via Bluetooth as described above. Audio will now play in stereo through both speakers.
3. USB/TF Card/AUX Input
- USB Input: Insert a USB flash drive into the USB port. The speaker will automatically switch to USB mode and begin playing audio files.
- TF Card Input: Insert a Micro TF card into the TF card slot. The speaker will automatically switch to TF card mode and play audio files.
- AUX Input: Connect an external audio device (e.g., MP3 player, laptop) using the provided 3.5mm AUX cable to the AUX input port. Press the 'M' (Mode) button to switch to AUX mode.
4. Guitar Input
Connect your guitar to the dedicated Guitar Input port. Adjust the guitar volume using the 'GUITAR VOL' knob on the control panel.
5. One-Click Recording
The speaker supports one-click recording. Ensure a USB drive or TF card is inserted. Press the 'REC' button to start recording audio from the microphone or guitar input. Press 'REC' again to stop and save the recording.
6. RGB LED Lights
Image: The Artis SoundPro 500 speaker displaying its dynamic RGB LED lighting effects, enhancing the party atmosphere.
The speaker features integrated RGB LED lights. Use the dedicated light mode button on the control panel or remote to cycle through different lighting effects or turn them off.
7. Audio Controls
Adjust the following audio settings using the knobs and buttons on the control panel or remote:
- Volume: Master volume control for all audio sources.
- Bass: Adjusts the low-frequency output.
- Treble: Adjusts the high-frequency output.
- Echo: Controls the echo effect for microphone input.
- Mic Vol: Adjusts the volume of the wireless microphone.
Maintenance
1. Cleaning the Speaker
Wipe the speaker's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Avoid spraying liquids directly onto the speaker.
2. Battery Care
To prolong battery life, avoid fully discharging the speaker frequently. Charge the speaker regularly, even if not in use for extended periods (e.g., once every 3 months). Store the speaker in a cool, dry place.
3. Storage
When storing the speaker for a long time, ensure it is turned off and disconnected from the power adapter. Store it in a clean, dry environment away from extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery or no power. | Charge the speaker using the provided power adapter. Ensure the power outlet is functional. |
| No sound from the speaker. | Volume too low, incorrect input mode, or device not connected properly. | Increase the speaker volume. Press the 'M' button to select the correct input mode (Bluetooth, USB, TF, AUX). Ensure your device is properly paired/connected. |
| Bluetooth connection fails. | Speaker not in pairing mode, device too far, or interference. | Ensure the speaker is in Bluetooth pairing mode. Move your device closer to the speaker (within 10m). Turn off other Bluetooth devices to reduce interference. Try unpairing and re-pairing. |
| Wireless microphone not working. | Microphone not powered on, low batteries, or Mic Vol is too low. | Ensure the microphone is powered on and has fresh batteries. Increase the 'MIC VOL' knob on the speaker. |
| TWS pairing unsuccessful. | Speakers already connected to another device or not in TWS pairing mode. | Ensure both speakers are disconnected from any Bluetooth devices. Follow the TWS pairing instructions carefully. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AR-SoundPro 500 |
| Speaker Output | 100W RMS |
| Battery Capacity | 12000 mAh |
| Bluetooth Version | 5.3 |
| Bluetooth Range | 10 meters |
| Frequency Range | 80 Hz - 12 KHz |
| Signal to Noise Ratio | >80 dB |
| Connectivity Technology | Auxiliary, Bluetooth, USB |
| Inputs | USB, TF Card, AUX, Guitar Input |
| Special Features | TWS, RGB LED Lights, Wireless Mic, One-Click Recording, Echo Control, Treble and Bass Control |
| Dimensions (D x W x H) | 26.8D x 24.6W x 6H Centimeters (Product dimensions from specifications, note: feature bullets state 320mm x 298mm x 652mm, using the more precise spec table data) |
| Weight | 7.5 Kilograms |
| Material | Metal, Plastic |
| Control Method | Button, Remote Control |
Warranty and Support
Warranty Information
The Artis SoundPro 500 comes with a 1 Year Carry In service center warranty from the date of purchase. Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.
Customer Support
For any queries, technical assistance, or warranty claims, please contact Artis customer care:
- Phone: 1800 123 8195 / 1800 1208195
- Email: inquiry@artis.in
