Bestier TV Stand for 70 inch TV with LED Lights

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Bestier TV Stand. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This TV stand is designed to accommodate televisions up to 70 inches and features integrated LED lighting and versatile storage solutions for gaming consoles and media devices.

Safety Information

• Always follow the assembly instructions precisely to ensure structural integrity and prevent injury.
• Do not exceed the maximum weight capacity of the TV stand. Refer to the 'Specifications' section for details.
• Ensure the TV stand is placed on a level, stable surface.
• Utilize the included anti-tipping feature to secure the TV stand to the wall, especially in households with children or pets.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Avoid exposing the LED lights or electrical components to moisture.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer service.

• All necessary hardware (screws, dowels, cam locks, etc.)
• Assembly tools (screwdriver, Allen wrench)
• P2 Particle Board panels (various sizes for top, sides, shelves, and dividers)
• Acrylic adjustable shelves
• LED light strips with remote control
• Anti-tipping hardware

Image: Exploded view of all components and hardware included with the Bestier TV Stand.

Assembly Instructions

Assembly is required. Please follow the detailed steps below. An installation video is also available for visual guidance.

Assembly Video Tutorial

Video: Official Bestier 63 inch Gaming TV Stand Installation Video. This video provides a step-by-step visual guide for assembling the TV stand.

Step-by-Step Guide

1. Prepare Base Panels: Attach the foot pads (M) to the base panel (15). Secure the base panel to the bottom support panels (2 and 3) using screws (E). Ensure screw hole orientation is correct.
2. Assemble Central Dividers: Insert wood dowels (C) into panels (6 and 7). Attach these central divider panels to the assembled base structure using screws (D), ensuring correct hole orientation.
3. Attach Back Supports: Secure the back support bars (10 and 11) to the main structure using wood dowels (C) and screws (A). Pay attention to screw hole orientation.
4. Install Side Panels: Attach the side panels (4 and 5) to the main structure using screws (B).
5. Connect Top Panel: Place the top panel (1) onto the assembled structure, aligning all holes. Secure it using screws (B).
6. Insert Adjustable Shelves: Place the acrylic shelves (19) into the desired height slots.
7. Install LED Lights: Connect the LED light strips (22) to the power cable (23) and route them along the designated areas. Secure them with clips or adhesive as instructed.
8. Attach Anti-Tipping Brackets: Secure the anti-tipping brackets (21) to the back of the TV stand and to the wall using screws (K) and wall anchors (L).

Operating Instructions: LED Lights

Your Bestier TV Stand features integrated LED lighting with multiple customization options.

Remote Control Functions:

• Power On/Off: Press the power button to turn the lights on or off.
• Color Selection: Use the color buttons to choose from 16 million static colors.
• Dynamic Modes: Select from 366 dynamic modes to create various lighting effects.
• Brightness Adjustment: Increase or decrease the brightness of the lights.
• Speed Adjustment: For dynamic modes, adjust the speed of the light transitions.

Image: The Bestier TV Stand showcasing its LED lighting features, including color options and dynamic modes controlled by a remote.

Maintenance

Product Care Instructions:

• Wipe the surfaces with a dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Keep the TV stand away from direct sunlight and excessive moisture to prevent warping or discoloration.

Troubleshooting

If you encounter any issues with your Bestier TV Stand, refer to the following common solutions:

• Wobbly Stand: Ensure all cam locks and screws are fully tightened. Check that the stand is on a level surface. Adjust foot pads if applicable.
• LED Lights Not Working: Check that the power adapter is securely plugged into both the light strip and a working electrical outlet. Ensure the remote control has fresh batteries and is pointed directly at the receiver.
• Missing Parts: If any parts were missing upon arrival, please contact Bestier customer service for replacements.
• Difficulty Assembling: Review the assembly video and step-by-step instructions carefully. Ensure all panels are oriented correctly. Do not force parts together.

Specifications

• Brand: Bestier
• Model Number: L102716H
• Material: P2 Particle Board
• Color: Black Carbon Fiber
• Product Dimensions (L x W x H): 62.99 x 13.31 x 26.38 inches
• Item Weight: 52.3 pounds
• Suitable TV Size: Up to 70 inches
• LED Lights: 16 million colors, 366 dynamic modes
• Storage: 6 compartments, adjustable acrylic shelves
• Special Features: Cable management holes, anti-tipping feature

Image: Detailed dimensions of the Bestier TV Stand, indicating compatibility with various TV sizes up to 70 inches.

Warranty and Support

Bestier takes full responsibility for any quality issues and is committed to providing satisfying customer service. For any product issues or inquiries, please contact Bestier customer service. We always stand by our products and offer support with all efforts.

For further assistance, please visit the Bestier Store on Amazon.