Product Overview
The Transwon Tempered Glass Screen Protector is designed to provide superior protection for your MOOLAH Tablet T10, T10 PRO, M1, and M1+ Tablet models. It offers high transparency, scratch resistance, and maintains original touch sensitivity.
Image: Transwon Tempered Glass Screen Protector packaging alongside a tablet with the protector applied, showcasing the product and its compatibility.
- High Transparency: 99.99% light transmission ratio ensures a clear and vibrant display.
- Scratch Terminator: 9H Hardness provides robust protection against scratches, impacts, and shocks.
- High Response: Ultra-thin 0.33 mm design maintains original touch sensitivity for smooth operation.
- Anti-Fingerprint: Features a coating that resists fingerprints, oil, and sweat, making it easy to clean.
- Bubble-Free Installation: Air-exhausting adhesive allows for smooth, automatic attachment without bubbles.
Installation Guide
Follow these steps for a smooth and bubble-free installation of your screen protector.
- Step 1: Clean Your Screen
Thoroughly clean your tablet screen using the provided wet wipe cloth to remove all dust, dirt, and contaminants. Ensure the screen is completely dry before proceeding.
- Step 2: Prepare the Protector
Carefully tear off half of the first protective layer (the side that adheres to the screen). Avoid touching the adhesive side.
- Step 3: Apply the Protector
Align the screen protector precisely with your tablet's screen, paying attention to cut-outs for the camera and sensors. Gently lower the protector onto the screen. The air-exhausting adhesive will automatically attach it smoothly. If any bubbles remain, gently push them towards the edges with a soft cloth.
Image: A visual guide illustrating the three key steps for installing the screen protector: cleaning the tablet screen, peeling off the protective film, and carefully placing the protector onto the screen.
Key Features and Usage
The Transwon Tempered Glass Screen Protector enhances your tablet experience with several key features.
Image: A diagram highlighting the main attributes of the screen protector, including its high responsiveness, durable and scratch-resistant surface, bubble-free application, high transparency, and ultra-thin profile.
- Optimal Clarity: Enjoy your tablet's display with 99.99% transparency, ensuring original visual quality without distortion.
- Enhanced Durability: The 9H hardness rating provides superior resistance against daily wear and tear, including scratches from keys or coins.
- Smooth Touch Experience: The thin design ensures that your tablet's touch screen remains fully responsive, allowing for seamless navigation and gaming.
Image: An illustration demonstrating the anti-fingerprint properties of the screen protector, showing how fingerprints are easily wiped away without leaving residue.
The anti-fingerprint coating significantly reduces smudges from oil and sweat, keeping your screen cleaner for longer and making it easier to wipe clean.
Maintenance and Care
To ensure the longevity and optimal performance of your Transwon Tempered Glass Screen Protector, follow these simple care instructions:
- Regular Cleaning: Use a soft, lint-free cloth to gently wipe the screen protector. For stubborn smudges or fingerprints, a slightly damp cloth (with water or a screen cleaner) can be used, followed by a dry wipe.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol, or ammonia-based solutions, as these can damage the oleophobic coating.
- Protect from Sharp Objects: While the protector is 9H hard, extreme pressure or direct impact from very sharp objects can still cause damage. Avoid placing your tablet face down on rough surfaces.
Troubleshooting
Here are solutions to common issues you might encounter during or after installation:
- Bubbles After Installation:
Small bubbles often disappear within 24-48 hours as the adhesive settles. For larger bubbles, gently lift the nearest corner of the protector and re-apply, pushing the bubble out with a soft cloth as you lay it back down.
- Dust Particles Under Protector:
If dust particles are trapped, carefully lift the protector from the nearest corner. Use a dust-absorber sticker (if provided) or a piece of tape to dab the dust off both the screen and the adhesive side of the protector. Re-apply carefully.
- Misalignment:
If the protector is misaligned, gently lift it from one corner and re-position it. Ensure proper alignment with the tablet's edges and cut-outs before fully pressing it down.
- Edges Not Sticking:
Ensure the screen is perfectly clean and free of dust or oil, especially around the edges. Press firmly along the edges for a few seconds to help the adhesive bond. If the issue persists, the protector might be slightly misaligned or the screen itself might have a slight curve not compatible with the protector's flat design (though this is rare for compatible models).
Specifications
| Attribute | Detail |
|---|---|
| Brand | Transwon |
| Compatible Models | MOOLAH Tablet T10, MOOLAH T10 PRO, MOOLAH M1, MOOLAH M1+ Tablet |
| Material | Tempered Glass |
| Hardness | 9H |
| Product Dimensions | 9.29"L x 5.67"W |
| Screen Size Compatibility | 10.1 Inches |
| Finish Type | Glossy |
Warranty and Support
Transwon is committed to providing high-quality products. While specific warranty details are not provided in this manual, for any product-related inquiries, issues, or support needs, please contact Transwon customer service through the retailer where the product was purchased or visit the official Transwon website for contact information.
Please retain your purchase receipt as proof of purchase for any warranty claims or support requests.