Veeniix V992

Veeniix V992 Transform Robot RC Car Instruction Manual

Model: V992

Introduction

This manual provides essential information for the safe and effective operation of your Veeniix V992 Transform Robot RC Car. Please read it thoroughly before use and retain it for future reference.

Veeniix V992 Transform Robot RC Car in car mode, gray with red accents.

Image: The Veeniix V992 Transform Robot RC Car in its sleek car form, ready for action.

Safety Information

For external use only.

Always supervise children during play. Keep small parts away from young children to prevent choking hazards. Do not operate near water or in wet conditions. Avoid impact with hard surfaces to prevent damage. Ensure batteries are installed correctly and charged safely.

What's in the Box

  • Remote Control Car
  • Battery (2 included)
  • Charging Cable
  • Remote Controller
  • User Manual
Veeniix V992 Transform Robot RC Car packaging and contents, including the car, remote, and accessories.

Image: The product box and all included components: the car, remote controller, batteries, charging cable, and user manual.

Setup

1. Charging the Battery

Before first use, fully charge the included lithium-ion batteries. Connect the charging cable to the battery and then to a 5V/2A USB power adapter (not included). The indicator light on the charging cable will show charging status.

2. Installing Batteries

For the Car:

  1. Locate the battery compartment on the underside of the car.
  2. Open the battery compartment cover.
  3. Connect a fully charged battery to the car's battery connector.
  4. Carefully place the battery inside the compartment and close the cover.

For the Remote Controller:

  1. Open the battery cover on the back of the remote controller.
  2. Insert two AA batteries (not included), ensuring correct polarity (+/-).
  3. Close the battery cover.

3. Pairing the Car and Remote

Turn on both the car and the remote controller. They will automatically pair. A successful pairing is indicated by a stable light on the remote.

Video: This video demonstrates the unboxing, battery installation for both the car and remote, and the pairing process for the Veeniix V992 Transform Robot RC Car.

Operating Instructions

1. Basic Controls (Remote Controller)

  • Left Joystick: Controls forward and backward movement.
  • Right Joystick: Controls turning left and right.
  • Light Button: Press to turn the car's lights on or off.
  • Music Button: Press to turn the car's sound effects on or off.

2. One-Key Deformation

Press the 'Deformation' button on the remote controller to switch the car between its car and robot forms. Long press the button to initiate the transformation.

Veeniix V992 Transform Robot RC Car in robot mode, gray with red accents.

Image: The Veeniix V992 Transform Robot RC Car in its upright robot form.

3. Gesture Sensing Deformation

The car features a gesture sensing mode. Activate this mode via the remote. Once active, place your hand approximately 0.5 feet in front of the car's front sensor to trigger automatic transformation between car and robot modes.

4. Automatic Demonstration

Press the 'Automatic Demo' button on the remote controller to activate a pre-programmed sequence of movements and transformations.

Video: This video showcases the remote-controlled transformation and gesture sensing features of the Veeniix V992.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the car and remote. Avoid water or cleaning solutions.
  • Storage: When not in use, turn off both the car and remote. Remove batteries from the remote if storing for extended periods. Store in a cool, dry place away from direct sunlight.
  • Battery Care: Always use the provided charging cable. Do not overcharge batteries.

Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote.Low battery in car or remote; not paired.Charge car battery, replace remote batteries, re-pair devices.
Transformation not working.Low battery; obstruction; gesture sensor blocked.Ensure full charge, clear obstructions, ensure sensor is clean and unobstructed.
Short play time.Battery not fully charged; old battery.Ensure full charge before use. Consider replacing battery if performance degrades significantly.

Specifications

  • Model Number: V992
  • Scale: 1:14
  • Product Dimensions: 12.6 x 2 x 3.3 inches
  • Item Weight: 2.18 pounds
  • Recommended Age: 6 - 15 years
  • Batteries: 2 Lithium Ion batteries (included)
  • Control Frequency: 2.4GHz

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Veeniix website. Keep your proof of purchase for any warranty claims.

© 2025 Veeniix. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.