Introduction
Thank you for purchasing the Catalina Lighting Modern Multipurpose Spotlight Lamp. This versatile lamp is designed to provide adjustable accent lighting for various indoor settings, functioning as a desk lamp, spotlight, or wall-mounted fixture. Please read this manual thoroughly before installation and use to ensure proper operation and safety.
Figure 1: Two Catalina Lighting Spotlight Lamps
Safety Information
- Indoor Use Only: This product is designed for indoor use. Do not expose to water or moisture.
- Electrical Safety: Always unplug the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Bulb Type: Use only one 40-watt incandescent equivalent bulb with an A19 E26 socket. Do not exceed the maximum wattage.
- Heat: Light bulbs can become hot. Allow the bulb to cool before touching or replacing.
- Cord Care: Do not place the cord near heat sources. Do not operate the lamp with a damaged cord or plug.
- Assembly: Ensure all components are securely assembled before connecting to power.
Package Contents
Your package should contain the following items:
- Catalina Lighting Spotlight Lamp (x2)
- Integrated power cord with in-line on/off switch (x2)
Note: Light bulbs are not included and must be purchased separately.
Product Features
- Adjustable Shade: The lamp features an adjustable shade that pivots, allowing you to direct light precisely where needed.
- Versatile Placement: Can be used on a flat surface with its standing base or mounted on a wall using the built-in keyhole.
- Brushed Nickel Finish: A sleek, modern brushed nickel metal finish complements various decor styles.
- Felt Base: The bottom of the standing base includes a felt cover to protect surfaces when used as a desk or accent lamp.
- In-line Switch: Equipped with an in-line on/off switch on the power cord for convenient operation.
- Smart Home Compatible: Can be integrated with smart outlets or switches (sold separately) for use with smart home systems.
Figure 2: Front View of Lamp
Figure 3: Side View of Lamp
Figure 4: Back View of Lamp
Setup and Installation
1. Bulb Installation
- Ensure the lamp is unplugged from the power outlet.
- Carefully screw one A19 E26 base bulb (max 40-watt incandescent equivalent) into the lamp socket. Do not overtighten.
2. Desk or Accent Lamp Setup
- Place the lamp on a stable, flat surface. The felt base will protect the surface.
- Adjust the spotlight head to the desired angle by gently tilting it.
- Plug the power cord into a standard 120V AC electrical outlet.
Figure 5: Lamp in Desk/Accent Configuration
3. Wall Mount Installation
The lamp features a built-in keyhole for easy wall mounting.
- Determine the desired mounting location on a wall.
- Mark the position for a screw (not included) that will fit the keyhole slot on the lamp's base.
- Install a suitable screw into the wall, leaving a small portion of the screw head exposed. Ensure the screw is anchored securely for the lamp's weight.
- Align the keyhole on the lamp's base with the screw head and slide the lamp down to secure it.
- Adjust the spotlight head to the desired angle.
- Plug the power cord into a standard 120V AC electrical outlet.
Operating Instructions
To operate the lamp:
- Ensure the lamp is properly installed and plugged into a functioning 120V AC outlet.
- Locate the in-line on/off switch on the power cord.
- Press the switch to the 'ON' position to illuminate the lamp.
- Press the switch to the 'OFF' position to turn off the lamp.
- Adjust the angle of the spotlight head as needed to direct the light.
Maintenance
Cleaning
- Always unplug the lamp before cleaning.
- Wipe the lamp with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement
- Ensure the lamp is unplugged and the bulb has completely cooled before attempting to replace it.
- Carefully unscrew the old bulb from the socket.
- Screw in a new A19 E26 base bulb (max 40-watt incandescent equivalent).
- Dispose of the old bulb according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | Lamp is unplugged. | Ensure the power cord is securely plugged into a working outlet. |
| Bulb is loose or burned out. | Tighten the bulb or replace it with a new one (A19 E26, max 40W equivalent). | |
| Power outlet is not functioning. | Test the outlet with another device or check the circuit breaker. | |
| Light is too dim or too bright. | Incorrect bulb wattage. | Replace the bulb with one of the appropriate wattage (max 40W equivalent). |
| Lamp head does not stay in position. | Pivot mechanism is loose. | Gently tighten the screws on the pivot points if accessible and designed for adjustment. Avoid overtightening. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 18775-018 |
| Dimensions (D x W x H) | 4.75" x 6" x 6.25" |
| Finish Type | Brushed Nickel |
| Base Material | Metal |
| Shade Material | Metal |
| Bulb Base | E26 |
| Bulb Shape Size | A19 |
| Max Wattage | 40 watts (incandescent equivalent) |
| Voltage | 120 Volts |
| Power Source | Corded Electric |
| Cord Length | 60 inches (approx.) |
| Switch Type | In-line On/Off |
| Mounting Type | Desk Mount / Wall Mount (keyhole) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 4.02 pounds (for the set of 2) |
Figure 6: Product Dimensions
Warranty
This product comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please contact Catalina Lighting customer service. Refer to the product packaging or the official Catalina Lighting website for current contact information.
Online Resources: For additional product information and support, visit the Catalina Lighting Store on Amazon.