ZEMOJ RGB Linear Retro Stage Light

1. Introduction

Thank you for purchasing the ZEMOJ RGB Linear Retro Stage Light. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new stage lighting unit. Please read this manual thoroughly before use and retain it for future reference.

This powerful 6 x 50W COB LED fixture is designed for professional stage lighting applications, including DJ setups, concerts, weddings, discos, and dance halls, offering vibrant RGB illumination and versatile control options.

2. Safety Instructions

Always observe the following safety precautions to prevent electric shock, fire, or injury:

• This product is for indoor use only. Do not expose to rain or moisture.
• Ensure the power supply voltage matches the product's requirements (AC 240V).
• Always disconnect from power before cleaning, servicing, or moving the fixture.
• Do not operate the fixture if the power cord is damaged.
• Maintain adequate ventilation around the unit. Do not block ventilation openings.
• Avoid direct eye exposure to the light source.
• Installation should be performed by qualified personnel. Ensure secure mounting.
• Do not attempt to repair the unit yourself. Refer all servicing to qualified service personnel.

3. Product Overview and Components

The ZEMOJ RGB Linear Retro Stage Light features a robust aluminum construction with six powerful COB LED light units. Below are the key components of the fixture:

Figure 3.1: Key Components of the Stage Light. This diagram highlights the LED display for settings, the reflectors for light projection, the internal LED light strips, the built-in fan for cooling, and the stable base for secure placement.

Figure 3.2: Front and Back View of the 6-piece LED Par Light. The front displays the six hexagonal light units, while the back shows the control interface and cooling fan.

Main Features:

• 6 x 50W COB LED Units: Provides powerful and vibrant RGB illumination.
• DMX Control: Offers precise control over lighting parameters.
• Multiple Operating Modes: Auto, Sound-Activated, Master-Slave, DMX.
• 32-bit 0-100% Linear Dimming: Smooth and accurate brightness control.
• Durable Construction: Made from high-quality aluminum for longevity.
• Built-in Fan: Ensures efficient heat dissipation for stable performance.

4. Setup

4.1 Unpacking

Carefully unpack the fixture and check for any damage during transit. Retain the packaging materials for future transport or storage.

4.2 Placement

Place the fixture on a stable, flat surface or mount it securely using appropriate clamps and safety cables (not included). Ensure there is sufficient space around the unit for ventilation. The fixture can be ceiling-mounted or wall-mounted.

Figure 4.1: Product Dimensions and Adjustable Height. The diagram shows the overall height of 115cm (45.3in), width of 32cm (12.6in), and an adjustable height of 30cm for the base.

4.3 Power Connection

Connect the provided electric power cord to the fixture's power input. Ensure the power outlet is compatible with the fixture's voltage (AC 240V) and has proper grounding.

5. Operating

The ZEMOJ RGB Linear Retro Stage Light offers various operating modes to suit different event requirements. Use the LED display and control buttons on the back of the unit to navigate and select modes.

Figure 5.1: Available Operating Modes. This image illustrates the various control modes including sound activation, DMX, automatic programs, master-slave synchronization, strobe effects, and color jump changes.

5.1 Control Panel

The control panel on the back of the unit features an LED display and buttons (MENU, UP, DOWN, ENTER) for mode selection and parameter adjustment.

5.2 Operating Modes

• DMX Mode: Connect a DMX controller to the fixture's DMX IN port. Use the control panel to set the DMX address. The fixture supports 8/28 DMX channels. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX guide or manufacturer's website) for specific control functions.
• Automatic Mode: The fixture runs through pre-programmed light sequences and color changes automatically. Select this mode from the menu.
• Sound-Activated Mode: The light reacts to sound and music, changing patterns and colors in sync with the beat. Ensure the built-in microphone is not obstructed.
• Master-Slave Mode: Connect multiple fixtures using DMX cables. Set one fixture as the 'Master' and others as 'Slave'. The slave units will mimic the master's operation.
• Dimming: The fixture supports 32-bit 0-100% linear dimming for smooth brightness adjustments.

Figure 5.2: Various Color Outputs. This grid demonstrates the wide range of vibrant colors the stage light can produce, including primary and secondary colors.

6. Maintenance

6.1 Cleaning

To maintain optimal performance and extend the lifespan of your fixture, regular cleaning is recommended:

• Disconnect the power before cleaning.
• Use a soft, lint-free cloth dampened with a mild cleaning solution to wipe the exterior.
• Clean the lenses and reflectors periodically to ensure maximum light output. Do not use abrasive cleaners.
• Ensure ventilation openings are free from dust and debris.

6.2 Storage

If the fixture will not be used for an extended period, store it in its original packaging in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your ZEMOJ RGB Linear Retro Stage Light, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

Specific warranty details for the ZEMOJ RGB Linear Retro Stage Light are typically provided at the point of purchase or by the manufacturer. Please refer to your purchase documentation or contact the seller for information regarding warranty coverage and terms.

9.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or inquiries about parts and service, please contact the seller or ZEMOJ customer support. Have your product model number (ZQ1512) and ASIN (B0D3QG49CZ) ready when contacting support.